From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: pull request: wireless 2011-11-09
Date: Wed, 9 Nov 2011 14:35:04 -0500 [thread overview]
Message-ID: <20111109193504.GA32400@tuxdriver.com> (raw)
Dave,
Here is another batch of fixes intended for 3.2. First up is a NULL
pointer fix for brcm80211. Next is a mac80211 fix to use the min
supported rate for APs that fail to advertise their basic rate set in
their associate response. After that is a wl12xx fix that corrects
an SSID list check. The ath regulatory code gets a NULL pointer
fix, and the mac80211 uAPSD code gets a fix to set the "more data"
flag properly. The mwifiex driver gets a fix for a memory leak.
The code in net/wireless gets a flurry of fixes from Johannes,
including a kerneldoc fix. Finally, b43 rounds-out the list with a
couple of PHY-related fixes.
Regarding the Bluetooth fixes, Gustavo says this:
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit 2bc8ca40f951163b3bb75949479e2755c12c1b96:
ipv4: Fix inetpeer expire time information (2011-11-08 14:40:40 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
Andrzej Kaczmarek (1):
Bluetooth: Use miliseconds for L2CAP channel timeouts
Arek Lichwa (1):
Bluetooth: Revert: Fix L2CAP connection establishment
Arend van Spriel (1):
brcm80211: smac: eliminate a null pointer dereference in dma.c
Eliad Peller (1):
mac80211: use min rate as basic rate for buggy APs
Eyal Shapira (1):
wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters
Helmut Schaa (1):
ath: Fix NULL ptr dereference in ath_reg_apply_world_flags
Janusz.Dziedzic@tieto.com (1):
mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit setting
Jesper Juhl (1):
net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params()
Johannes Berg (4):
nl80211: fix HT capability attribute validation
cfg80211: allow setting TXQ parameters only in AP mode
cfg80211: fix cmp_ies
cfg80211: fix missing kernel-doc
John W. Linville (2):
Merge branch 'master' of git://git.kernel.org/.../padovan/bluetooth
Merge branch 'master' of ssh://ra.kernel.org/.../linville/wireless into for-davem
Rafał Miłecki (2):
b43: fill ctl1 word on all newer PHYs, fix PHY errors
b43: HT-PHY: report signal to mac80211
Wen-chien Jesse Sung (1):
Bluetooth: Add support for Broadcom BCM20702A0
drivers/bluetooth/btusb.c | 3 +++
drivers/net/wireless/ath/regd.c | 2 ++
drivers/net/wireless/b43/xmit.c | 15 +++++++++++++--
drivers/net/wireless/b43/xmit.h | 16 +++++++++++++++-
drivers/net/wireless/brcm80211/brcmsmac/dma.c | 5 +++--
drivers/net/wireless/mwifiex/scan.c | 3 ++-
drivers/net/wireless/wl12xx/scan.c | 2 +-
include/net/bluetooth/l2cap.h | 7 +++++--
include/net/cfg80211.h | 4 ++++
net/bluetooth/hci_conn.c | 2 +-
net/bluetooth/l2cap_core.c | 16 ++++++++--------
net/mac80211/mlme.c | 19 +++++++++++++++++++
net/mac80211/sta_info.c | 8 ++++----
net/wireless/nl80211.c | 9 +++++++--
net/wireless/scan.c | 13 ++++++++-----
15 files changed, 95 insertions(+), 29 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index f9b7260..fe4ebc3 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -100,6 +100,9 @@ static struct usb_device_id btusb_table[] = {
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
+ /* Broadcom BCM20702A0 */
+ { USB_DEVICE(0x413c, 0x8197) },
+
{ } /* Terminating entry */
};
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 028310f..f1be57f 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -253,6 +253,8 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
int r;
sband = wiphy->bands[IEEE80211_BAND_2GHZ];
+ if (!sband)
+ return;
/*
* If no country IE has been received always enable active scan
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 58ea0e5..5f77cbe 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -175,6 +175,7 @@ void b43_generate_plcp_hdr(struct b43_plcp_hdr4 *plcp,
}
}
+/* TODO: verify if needed for SSLPN or LCN */
static u16 b43_generate_tx_phy_ctl1(struct b43_wldev *dev, u8 bitrate)
{
const struct b43_phy *phy = &dev->phy;
@@ -256,6 +257,9 @@ int b43_generate_txhdr(struct b43_wldev *dev,
unsigned int plcp_fragment_len;
u32 mac_ctl = 0;
u16 phy_ctl = 0;
+ bool fill_phy_ctl1 = (phy->type == B43_PHYTYPE_LP ||
+ phy->type == B43_PHYTYPE_N ||
+ phy->type == B43_PHYTYPE_HT);
u8 extra_ft = 0;
struct ieee80211_rate *txrate;
struct ieee80211_tx_rate *rates;
@@ -531,7 +535,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
extra_ft |= B43_TXH_EFT_RTSFB_CCK;
if (rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS &&
- phy->type == B43_PHYTYPE_N) {
+ fill_phy_ctl1) {
txhdr->phy_ctl1_rts = cpu_to_le16(
b43_generate_tx_phy_ctl1(dev, rts_rate));
txhdr->phy_ctl1_rts_fb = cpu_to_le16(
@@ -552,7 +556,7 @@ int b43_generate_txhdr(struct b43_wldev *dev,
break;
}
- if (phy->type == B43_PHYTYPE_N) {
+ if (fill_phy_ctl1) {
txhdr->phy_ctl1 =
cpu_to_le16(b43_generate_tx_phy_ctl1(dev, rate));
txhdr->phy_ctl1_fb =
@@ -736,7 +740,14 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
/* Link quality statistics */
switch (chanstat & B43_RX_CHAN_PHYTYPE) {
+ case B43_PHYTYPE_HT:
+ /* TODO: is max the right choice? */
+ status.signal = max_t(__s8,
+ max(rxhdr->phy_ht_power0, rxhdr->phy_ht_power1),
+ rxhdr->phy_ht_power2);
+ break;
case B43_PHYTYPE_N:
+ /* Broadcom has code for min and avg, but always uses max */
if (rxhdr->power0 == 16 || rxhdr->power0 == 32)
status.signal = max(rxhdr->power1, rxhdr->power2);
else
diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h
index 16c514d..98d9074 100644
--- a/drivers/net/wireless/b43/xmit.h
+++ b/drivers/net/wireless/b43/xmit.h
@@ -249,6 +249,12 @@ struct b43_rxhdr_fw4 {
} __packed;
} __packed;
union {
+ /* HT-PHY */
+ struct {
+ PAD_BYTES(1);
+ __s8 phy_ht_power0;
+ } __packed;
+
/* RSSI for N-PHYs */
struct {
__s8 power2;
@@ -257,7 +263,15 @@ struct b43_rxhdr_fw4 {
__le16 phy_status2; /* PHY RX Status 2 */
} __packed;
- __le16 phy_status3; /* PHY RX Status 3 */
+ union {
+ /* HT-PHY */
+ struct {
+ __s8 phy_ht_power1;
+ __s8 phy_ht_power2;
+ } __packed;
+
+ __le16 phy_status3; /* PHY RX Status 3 */
+ } __packed;
union {
/* Tested with 598.314, 644.1001 and 666.2 */
struct {
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/dma.c b/drivers/net/wireless/brcm80211/brcmsmac/dma.c
index b56a302..6ebec8f 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c
@@ -358,13 +358,14 @@ static uint nrxdactive(struct dma_info *di, uint h, uint t)
static uint _dma_ctrlflags(struct dma_info *di, uint mask, uint flags)
{
- uint dmactrlflags = di->dma.dmactrlflags;
+ uint dmactrlflags;
if (di == NULL) {
- DMA_ERROR(("%s: _dma_ctrlflags: NULL dma handle\n", di->name));
+ DMA_ERROR(("_dma_ctrlflags: NULL dma handle\n"));
return 0;
}
+ dmactrlflags = di->dma.dmactrlflags;
dmactrlflags &= ~mask;
dmactrlflags |= flags;
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index dae8dbb..8a3f959 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -1469,7 +1469,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid,
s32 rssi, const u8 *ie_buf, size_t ie_len,
u16 beacon_period, u16 cap_info_bitmap, u8 band)
{
- struct mwifiex_bssdescriptor *bss_desc = NULL;
+ struct mwifiex_bssdescriptor *bss_desc;
int ret;
unsigned long flags;
u8 *beacon_ie;
@@ -1484,6 +1484,7 @@ mwifiex_update_curr_bss_params(struct mwifiex_private *priv, u8 *bssid,
beacon_ie = kmemdup(ie_buf, ie_len, GFP_KERNEL);
if (!beacon_ie) {
+ kfree(bss_desc);
dev_err(priv->adapter->dev, " failed to alloc beacon_ie\n");
return -ENOMEM;
}
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index 128ccb7..fc29c67 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -559,7 +559,7 @@ wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl,
break;
}
/* Fail if SSID isn't present in the filters */
- if (j == req->n_ssids) {
+ if (j == cmd->n_ssids) {
ret = -EINVAL;
goto out_free;
}
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index ab90ae0..6cc18f3 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -39,8 +39,11 @@
#define L2CAP_DEFAULT_ACK_TO 200
#define L2CAP_LE_DEFAULT_MTU 23
-#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
-#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
+#define L2CAP_DISC_TIMEOUT (100)
+#define L2CAP_DISC_REJ_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_ENC_TIMEOUT (5000) /* 5 seconds */
+#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
+#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
/* L2CAP socket address */
struct sockaddr_l2 {
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 92cf1c2..95852e3 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -456,6 +456,9 @@ enum station_parameters_apply_mask {
* as the AC bitmap in the QoS info field
* @max_sp: max Service Period. same format as the MAX_SP in the
* QoS info field (but already shifted down)
+ * @sta_modify_mask: bitmap indicating which parameters changed
+ * (for those that don't have a natural "no change" value),
+ * see &enum station_parameters_apply_mask
*/
struct station_parameters {
u8 *supported_rates;
@@ -615,6 +618,7 @@ struct sta_bss_parameters {
* user space MLME/SME implementation. The information is provided for
* the cfg80211_new_sta() calls to notify user space of the IEs.
* @assoc_req_ies_len: Length of assoc_req_ies buffer in octets.
+ * @sta_flags: station flags mask & values
*/
struct station_info {
u32 filled;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index c1c597e..e0af723 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
goto encrypt;
auth:
- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
+ if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
if (!hci_conn_auth(conn, sec_level, auth_type))
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 8cd1291..5ea94a1 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -251,7 +251,7 @@ static void l2cap_chan_timeout(unsigned long arg)
if (sock_owned_by_user(sk)) {
/* sk is owned by user. Try again later */
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
chan_put(chan);
return;
@@ -2488,7 +2488,7 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan, BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
break;
}
@@ -2661,7 +2661,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr
default:
sk->sk_err = ECONNRESET;
- __set_chan_timer(chan, HZ * 5);
+ __set_chan_timer(chan, L2CAP_DISC_REJ_TIMEOUT);
l2cap_send_disconn_req(conn, chan, ECONNRESET);
goto done;
}
@@ -2718,7 +2718,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan, BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
return 0;
}
@@ -2752,7 +2752,7 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd
if (sock_owned_by_user(sk)) {
l2cap_state_change(chan,BT_DISCONN);
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 5);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
bh_unlock_sock(sk);
return 0;
}
@@ -3998,7 +3998,7 @@ static inline void l2cap_check_encryption(struct l2cap_chan *chan, u8 encrypt)
if (encrypt == 0x00) {
if (chan->sec_level == BT_SECURITY_MEDIUM) {
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ * 5);
+ __set_chan_timer(chan, L2CAP_ENC_TIMEOUT);
} else if (chan->sec_level == BT_SECURITY_HIGH)
l2cap_chan_close(chan, ECONNREFUSED);
} else {
@@ -4066,7 +4066,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
L2CAP_CONN_REQ, sizeof(req), &req);
} else {
__clear_chan_timer(chan);
- __set_chan_timer(chan, HZ / 10);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
}
} else if (chan->state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
@@ -4086,7 +4086,7 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
}
} else {
l2cap_state_change(chan, BT_DISCONN);
- __set_chan_timer(chan, HZ / 10);
+ __set_chan_timer(chan, L2CAP_DISC_TIMEOUT);
res = L2CAP_CR_SEC_BLOCK;
stat = L2CAP_CS_NO_INFO;
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 17258fe..d3b408c 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1485,6 +1485,7 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk,
int i, j, err;
bool have_higher_than_11mbit = false;
u16 ap_ht_cap_flags;
+ int min_rate = INT_MAX, min_rate_index = -1;
/* AssocResp and ReassocResp have identical structure */
@@ -1551,6 +1552,10 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk,
rates |= BIT(j);
if (is_basic)
basic_rates |= BIT(j);
+ if (rate < min_rate) {
+ min_rate = rate;
+ min_rate_index = j;
+ }
break;
}
}
@@ -1568,11 +1573,25 @@ static bool ieee80211_assoc_success(struct ieee80211_work *wk,
rates |= BIT(j);
if (is_basic)
basic_rates |= BIT(j);
+ if (rate < min_rate) {
+ min_rate = rate;
+ min_rate_index = j;
+ }
break;
}
}
}
+ /*
+ * some buggy APs don't advertise basic_rates. use the lowest
+ * supported rate instead.
+ */
+ if (unlikely(!basic_rates) && min_rate_index >= 0) {
+ printk(KERN_DEBUG "%s: No basic rates in AssocResp. "
+ "Using min supported rate instead.\n", sdata->name);
+ basic_rates = BIT(min_rate_index);
+ }
+
sta->sta.supp_rates[wk->chan->band] = rates;
sdata->vif.bss_conf.basic_rates = basic_rates;
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index ce962d2..8eaa746 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -1354,12 +1354,12 @@ ieee80211_sta_ps_deliver_response(struct sta_info *sta,
* Use MoreData flag to indicate whether there are
* more buffered frames for this STA
*/
- if (!more_data)
- hdr->frame_control &=
- cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
- else
+ if (more_data || !skb_queue_empty(&frames))
hdr->frame_control |=
cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+ else
+ hdr->frame_control &=
+ cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
if (ieee80211_is_data_qos(hdr->frame_control) ||
ieee80211_is_qos_nullfunc(hdr->frame_control))
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 48260c2..b3a476f 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -132,8 +132,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
- [NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
- .len = NL80211_HT_CAPABILITY_LEN },
+ [NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },
[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
[NL80211_ATTR_IE] = { .type = NLA_BINARY,
@@ -1253,6 +1252,12 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
goto bad_res;
}
+ if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+ netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) {
+ result = -EINVAL;
+ goto bad_res;
+ }
+
nla_for_each_nested(nl_txq_params,
info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
rem_txq_params) {
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 0fb1424..dc23b31 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -259,17 +259,20 @@ static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2)
{
const u8 *ie1 = cfg80211_find_ie(num, ies1, len1);
const u8 *ie2 = cfg80211_find_ie(num, ies2, len2);
- int r;
+ /* equal if both missing */
if (!ie1 && !ie2)
return 0;
- if (!ie1 || !ie2)
+ /* sort missing IE before (left of) present IE */
+ if (!ie1)
return -1;
+ if (!ie2)
+ return 1;
- r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
- if (r == 0 && ie1[1] != ie2[1])
+ /* sort by length first, then by contents */
+ if (ie1[1] != ie2[1])
return ie2[1] - ie1[1];
- return r;
+ return memcmp(ie1 + 2, ie2 + 2, ie1[1]);
}
static bool is_bss(struct cfg80211_bss *a,
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2011-11-09 19:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-09 19:35 John W. Linville [this message]
2011-11-09 21:20 ` pull request: wireless 2011-11-09 David Miller
2011-11-09 21:25 ` John W. Linville
2011-11-09 21:35 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111109193504.GA32400@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.