All of lore.kernel.org
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: pull request: wireless 2011-11-14
Date: Mon, 14 Nov 2011 14:32:54 -0500	[thread overview]
Message-ID: <20111114193253.GA2499@tuxdriver.com> (raw)

Dave,

Here is another batch of fixes intended for 3.2.  This includes an
mwifiex fix to enable association with "hidden" APs, a fix for avoiding
an unhandled RF kill interrupt when unloading iwlwifi, a NULL pointer
fix in the mac80211 radiotap code, a fix for ieee80211_build_probe_req
to pass-up a proper return code when ieee80211_probereq_get fails, a
race fix for mac80211 to avoid a WARNING in ieee80211_can_queue_work, a
NULL pointer fix in the cfg80211 regulatory code, and a fix for an
unaligned memory access in the libertas driver.

Please let me know if there are problems!

Thanks,

John

---

The following changes since commit 1e49570171117e547e6324c58371db4a0dc2f1db:

  net: Fix references to deleted NET_ETHERNET Kconfig setting. (2011-11-09 19:26:53 -0500)

are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem

Amitkumar Karwar (1):
      mwifiex: fix association issue with AP configured in hidden SSID mode

Emmanuel Grumbach (1):
      iwlwifi: avoid a panic when unloading the module with RF Kill

Johannes Berg (3):
      mac80211: fix NULL dereference in radiotap code
      mac80211: fix bug in ieee80211_build_probe_req
      mac80211: fix race between connection monitor & suspend

John W. Linville (1):
      Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem

Luis R. Rodriguez (1):
      cfg80211: fix bug on regulatory core exit on access to last_request

Steven Miao (1):
      wireless: libertas: fix unaligned le64 accesses

 drivers/net/wireless/iwlwifi/iwl-trans-pcie.c |   33 +++++++++++++------------
 drivers/net/wireless/libertas/cfg.c           |    2 +-
 drivers/net/wireless/mwifiex/scan.c           |    6 +++-
 net/mac80211/mlme.c                           |    2 +-
 net/mac80211/rx.c                             |    9 ++++--
 net/mac80211/util.c                           |    4 +++
 net/wireless/reg.c                            |    3 ++
 7 files changed, 36 insertions(+), 23 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
index da34110..ce91898 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c
@@ -990,29 +990,16 @@ static int iwl_trans_tx_stop(struct iwl_trans *trans)
 	return 0;
 }
 
-static void iwl_trans_pcie_disable_sync_irq(struct iwl_trans *trans)
+static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 {
 	unsigned long flags;
-	struct iwl_trans_pcie *trans_pcie =
-		IWL_TRANS_GET_PCIE_TRANS(trans);
+	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 
+	/* tell the device to stop sending interrupts */
 	spin_lock_irqsave(&trans->shrd->lock, flags);
 	iwl_disable_interrupts(trans);
 	spin_unlock_irqrestore(&trans->shrd->lock, flags);
 
-	/* wait to make sure we flush pending tasklet*/
-	synchronize_irq(bus(trans)->irq);
-	tasklet_kill(&trans_pcie->irq_tasklet);
-}
-
-static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
-{
-	/* stop and reset the on-board processor */
-	iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
-	/* tell the device to stop sending interrupts */
-	iwl_trans_pcie_disable_sync_irq(trans);
-
 	/* device going down, Stop using ICT table */
 	iwl_disable_ict(trans);
 
@@ -1039,6 +1026,20 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 
 	/* Stop the device, and put it in low power state */
 	iwl_apm_stop(priv(trans));
+
+	/* Upon stop, the APM issues an interrupt if HW RF kill is set.
+	 * Clean again the interrupt here
+	 */
+	spin_lock_irqsave(&trans->shrd->lock, flags);
+	iwl_disable_interrupts(trans);
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
+	/* wait to make sure we flush pending tasklet*/
+	synchronize_irq(bus(trans)->irq);
+	tasklet_kill(&trans_pcie->irq_tasklet);
+
+	/* stop and reset the on-board processor */
+	iwl_write32(bus(trans), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
 }
 
 static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 4fcd653..a7f1ab2 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -634,7 +634,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
 			if (channel &&
 			    !(channel->flags & IEEE80211_CHAN_DISABLED))
 				cfg80211_inform_bss(wiphy, channel,
-					bssid, le64_to_cpu(*(__le64 *)tsfdesc),
+					bssid, get_unaligned_le64(tsfdesc),
 					capa, intvl, ie, ielen,
 					LBS_SCAN_RSSI_TO_MBM(rssi),
 					GFP_KERNEL);
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index 8a3f959..8d3ab37 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -819,8 +819,10 @@ mwifiex_scan_setup_scan_config(struct mwifiex_private *priv,
 			wildcard_ssid_tlv->header.len = cpu_to_le16(
 				(u16) (ssid_len + sizeof(wildcard_ssid_tlv->
 							 max_ssid_length)));
-			wildcard_ssid_tlv->max_ssid_length =
-				user_scan_in->ssid_list[ssid_idx].max_len;
+
+			/* max_ssid_length = 0 tells firmware to perform
+			   specific scan for the SSID filled */
+			wildcard_ssid_tlv->max_ssid_length = 0;
 
 			memcpy(wildcard_ssid_tlv->ssid,
 			       user_scan_in->ssid_list[ssid_idx].ssid,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 234ffc2..b1b1bb3 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2288,6 +2288,7 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 
 	cancel_work_sync(&ifmgd->request_smps_work);
 
+	cancel_work_sync(&ifmgd->monitor_work);
 	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
 	if (del_timer_sync(&ifmgd->timer))
 		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
@@ -2296,7 +2297,6 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 	if (del_timer_sync(&ifmgd->chswitch_timer))
 		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
 
-	cancel_work_sync(&ifmgd->monitor_work);
 	/* these will just be re-established on connection */
 	del_timer_sync(&ifmgd->conn_mon_timer);
 	del_timer_sync(&ifmgd->bcn_mon_timer);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index bb53726..fb123e2 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -141,8 +141,9 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 	pos++;
 
 	/* IEEE80211_RADIOTAP_RATE */
-	if (status->flag & RX_FLAG_HT) {
+	if (!rate || status->flag & RX_FLAG_HT) {
 		/*
+		 * Without rate information don't add it. If we have,
 		 * MCS information is a separate field in radiotap,
 		 * added below. The byte here is needed as padding
 		 * for the channel though, so initialise it to 0.
@@ -163,12 +164,14 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 	else if (status->flag & RX_FLAG_HT)
 		put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else if (rate->flags & IEEE80211_RATE_ERP_G)
+	else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
 		put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else
+	else if (rate)
 		put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
 				   pos);
+	else
+		put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
 	pos += 2;
 
 	/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 51e256c..eca0fad 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -881,6 +881,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
 	skb = ieee80211_probereq_get(&local->hw, &sdata->vif,
 				     ssid, ssid_len,
 				     buf, buf_len);
+	if (!skb)
+		goto out;
 
 	if (dst) {
 		mgmt = (struct ieee80211_mgmt *) skb->data;
@@ -889,6 +891,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
 	}
 
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ out:
 	kfree(buf);
 
 	return skb;
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6acba9d..e71f5a6 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2265,6 +2265,9 @@ void /* __init_or_exit */ regulatory_exit(void)
 
 	kfree(last_request);
 
+	last_request = NULL;
+	dev_set_uevent_suppress(&reg_pdev->dev, true);
+
 	platform_device_unregister(reg_pdev);
 
 	spin_lock_bh(&reg_pending_beacons_lock);
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

             reply	other threads:[~2011-11-14 19:45 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-14 19:32 John W. Linville [this message]
2011-11-14 19:49 ` pull request: wireless 2011-11-14 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111114193253.GA2499@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.