From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alex Hacker Date: Thu, 8 Dec 2011 15:52:10 +0600 Subject: [ath9k-devel] External LNA gain. In-Reply-To: References: <20111207110835.GA3332@infinet.ru> Message-ID: <20111208095210.GA7290@infinet.ru> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hello Adrian, If you asking about chipset. I found that chips >= AR9220 do not use external LNA bypass, switching the on-chip LNA instead. But I see that ath9k never use xlnaGainCh. How the AR5416 works in this case? Best regards, Alex. On Thu, Dec 08, 2011 at 10:24:34AM +1100, Adrian Chadd wrote: > On 7 December 2011 22:08, Alex Hacker wrote: > > Hellow all, > > Does anybody knows how the xlnaGainCh field in EEPROM modal header should be > > used to achieve a correct AGC behaviour? This values is always programmed in > > a card's EEPROM but not used in ath9k driver, except in the debug code. How > > the AGC can get into account the external LNA gain? Is the some default values > > programmed by initvals? > > Which board? > > > Adrian > _______________________________________________ > ath9k-devel mailing list > ath9k-devel at lists.ath9k.org > https://lists.ath9k.org/mailman/listinfo/ath9k-devel -- With best wishes, Aleksey Shevkov. Infinet Wireless Ltd. +7-343-253-1533 (ext. 1658) +7-499-940-9350 (ext. 1658) +7-902-266-7135 http://www.infinetwireless.com Thu Dec 8 15:39:11 YEKT 2011