From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg KH Subject: Re: [PATCH 1/2 v2] serial: bfin-uart: Enable hardware automatic CTS only when CTS pin is available. Date: Mon, 12 Dec 2011 16:03:02 -0800 Message-ID: <20111213000302.GA18722@kroah.com> References: <1323673191-9210-1-git-send-email-sonic.adi@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from out2.smtp.messagingengine.com ([66.111.4.26]:33318 "EHLO out2.smtp.messagingengine.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753546Ab1LMADO (ORCPT ); Mon, 12 Dec 2011 19:03:14 -0500 Received: from compute4.internal (compute4.nyi.mail.srv.osa [10.202.2.44]) by gateway1.nyi.mail.srv.osa (Postfix) with ESMTP id 311DE217FC for ; Mon, 12 Dec 2011 19:03:14 -0500 (EST) Content-Disposition: inline In-Reply-To: <1323673191-9210-1-git-send-email-sonic.adi@gmail.com> Sender: linux-serial-owner@vger.kernel.org List-Id: linux-serial@vger.kernel.org To: Sonic Zhang Cc: Greg Kroah-Hartman , linux-serial@vger.kernel.org, LKML , uclinux-dist-devel@blackfin.uclinux.org, Sonic Zhang On Mon, Dec 12, 2011 at 02:59:50PM +0800, Sonic Zhang wrote: > From: Sonic Zhang > > Signed-off-by: Sonic Zhang > --- > drivers/tty/serial/bfin_uart.c | 19 ++++++++++--------- > 1 files changed, 10 insertions(+), 9 deletions(-) > > diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c > index abac237..a6c1c08 100644 > --- a/drivers/tty/serial/bfin_uart.c > +++ b/drivers/tty/serial/bfin_uart.c > @@ -726,16 +726,17 @@ static int bfin_serial_startup(struct uart_port *port) > } > #endif > #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS > - if (uart->cts_pin >= 0 && request_irq(uart->status_irq, > - bfin_serial_mctrl_cts_int, > - 0, "BFIN_UART_MODEM_STATUS", uart)) { > - uart->cts_pin = -1; > - pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); > - } > + if (uart->cts_pin >= 0) { > + if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int, > + IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { > + uart->cts_pin = -1; > + pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); Please use dev_info() here instead, that properly identifies the exact device you are having problems with. thanks, greg k-h