From: Johannes Berg <johannes@sipsolutions.net>
To: John Linville <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 1/2] mac80211: delay IBSS station insertion
Date: Wed, 14 Dec 2011 14:03:39 +0100 [thread overview]
Message-ID: <20111214130549.059007128@sipsolutions.net> (raw)
In-Reply-To: 20111214130338.347106528@sipsolutions.net
From: Johannes Berg <johannes.berg@intel.com>
In order to notify drivers and simplify the station
management code, defer IBSS station insertion to a
work item and don't do it directly while receiving
a frame.
This increases the complexity in IBSS a little bit,
but it's pretty straight forward and it allows us
to reduce the station management complexity (next
patch) considerably.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
net/mac80211/ibss.c | 154 +++++++++++++++++++++++++++++++++++----------
net/mac80211/ieee80211_i.h | 8 +-
net/mac80211/rx.c | 4 -
net/mac80211/sta_info.c | 2
4 files changed, 130 insertions(+), 38 deletions(-)
--- a/net/mac80211/ibss.c 2011-12-14 13:29:08.000000000 +0100
+++ b/net/mac80211/ibss.c 2011-12-14 13:57:18.000000000 +0100
@@ -275,6 +275,80 @@ static void ieee80211_sta_join_ibss(stru
cbss->tsf);
}
+static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta)
+ __acquires(RCU)
+{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ u8 addr[ETH_ALEN];
+
+ memcpy(addr, sta->sta.addr, ETH_ALEN);
+
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ wiphy_debug(sdata->local->hw.wiphy,
+ "Adding new IBSS station %pM (dev=%s)\n",
+ addr, sdata->name);
+#endif
+
+ sta_info_move_state(sta, IEEE80211_STA_AUTH);
+ sta_info_move_state(sta, IEEE80211_STA_ASSOC);
+ sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
+
+ rate_control_rate_init(sta);
+
+ /* If it fails, maybe we raced another insertion? */
+ if (sta_info_insert_rcu(sta))
+ return sta_info_get(sdata, addr);
+ return sta;
+}
+
+static struct sta_info *
+ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
+ const u8 *bssid, const u8 *addr,
+ u32 supp_rates)
+ __acquires(RCU)
+{
+ struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
+ struct ieee80211_local *local = sdata->local;
+ struct sta_info *sta;
+ int band = local->hw.conf.channel->band;
+
+ /*
+ * XXX: Consider removing the least recently used entry and
+ * allow new one to be added.
+ */
+ if (local->num_sta >= IEEE80211_IBSS_MAX_STA_ENTRIES) {
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: No room for a new IBSS STA entry %pM\n",
+ sdata->name, addr);
+ rcu_read_lock();
+ return NULL;
+ }
+
+ if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH) {
+ rcu_read_lock();
+ return NULL;
+ }
+
+ if (compare_ether_addr(bssid, sdata->u.ibss.bssid)) {
+ rcu_read_lock();
+ return NULL;
+ }
+
+ sta = sta_info_alloc(sdata, addr, GFP_KERNEL);
+ if (!sta) {
+ rcu_read_lock();
+ return NULL;
+ }
+
+ sta->last_rx = jiffies;
+
+ /* make sure mandatory rates are always added */
+ sta->sta.supp_rates[band] = supp_rates |
+ ieee80211_mandatory_rates(local, band);
+
+ return ieee80211_ibss_finish_sta(sta);
+}
+
static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
@@ -334,10 +408,11 @@ static void ieee80211_rx_bss_info(struct
#endif
rates_updated = true;
}
- } else
+ } else {
+ rcu_read_unlock();
sta = ieee80211_ibss_add_sta(sdata, mgmt->bssid,
- mgmt->sa, supp_rates,
- GFP_ATOMIC);
+ mgmt->sa, supp_rates);
+ }
}
if (sta && elems->wmm_info)
@@ -464,21 +539,17 @@ static void ieee80211_rx_bss_info(struct
ieee80211_sta_join_ibss(sdata, bss);
supp_rates = ieee80211_sta_get_rates(local, elems, band);
ieee80211_ibss_add_sta(sdata, mgmt->bssid, mgmt->sa,
- supp_rates, GFP_KERNEL);
+ supp_rates);
+ rcu_read_unlock();
}
put_bss:
ieee80211_rx_bss_put(local, bss);
}
-/*
- * Add a new IBSS station, will also be called by the RX code when,
- * in IBSS mode, receiving a frame from a yet-unknown station, hence
- * must be callable in atomic context.
- */
-struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
- u8 *bssid, u8 *addr, u32 supp_rates,
- gfp_t gfp)
+void ieee80211_ibss_rx_no_sta(struct ieee80211_sub_if_data *sdata,
+ const u8 *bssid, const u8 *addr,
+ u32 supp_rates)
{
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
struct ieee80211_local *local = sdata->local;
@@ -493,40 +564,29 @@ struct sta_info *ieee80211_ibss_add_sta(
if (net_ratelimit())
printk(KERN_DEBUG "%s: No room for a new IBSS STA entry %pM\n",
sdata->name, addr);
- return NULL;
+ return;
}
if (ifibss->state == IEEE80211_IBSS_MLME_SEARCH)
- return NULL;
+ return;
if (compare_ether_addr(bssid, sdata->u.ibss.bssid))
- return NULL;
-
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- wiphy_debug(local->hw.wiphy, "Adding new IBSS station %pM (dev=%s)\n",
- addr, sdata->name);
-#endif
+ return;
- sta = sta_info_alloc(sdata, addr, gfp);
+ sta = sta_info_alloc(sdata, addr, GFP_ATOMIC);
if (!sta)
- return NULL;
+ return;
sta->last_rx = jiffies;
- sta_info_move_state(sta, IEEE80211_STA_AUTH);
- sta_info_move_state(sta, IEEE80211_STA_ASSOC);
- sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
-
/* make sure mandatory rates are always added */
sta->sta.supp_rates[band] = supp_rates |
ieee80211_mandatory_rates(local, band);
- rate_control_rate_init(sta);
-
- /* If it fails, maybe we raced another insertion? */
- if (sta_info_insert(sta))
- return sta_info_get(sdata, addr);
- return sta;
+ spin_lock(&ifibss->incomplete_lock);
+ list_add(&sta->list, &ifibss->incomplete_stations);
+ spin_unlock(&ifibss->incomplete_lock);
+ ieee80211_queue_work(&local->hw, &sdata->work);
}
static int ieee80211_sta_active_ibss(struct ieee80211_sub_if_data *sdata)
@@ -865,6 +925,7 @@ void ieee80211_ibss_rx_queued_mgmt(struc
void ieee80211_ibss_work(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_ibss *ifibss = &sdata->u.ibss;
+ struct sta_info *sta;
mutex_lock(&ifibss->mtx);
@@ -876,6 +937,19 @@ void ieee80211_ibss_work(struct ieee8021
if (!ifibss->ssid_len)
goto out;
+ spin_lock_bh(&ifibss->incomplete_lock);
+ while (!list_empty(&ifibss->incomplete_stations)) {
+ sta = list_first_entry(&ifibss->incomplete_stations,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_bh(&ifibss->incomplete_lock);
+
+ ieee80211_ibss_finish_sta(sta);
+ rcu_read_unlock();
+ spin_lock_bh(&ifibss->incomplete_lock);
+ }
+ spin_unlock_bh(&ifibss->incomplete_lock);
+
switch (ifibss->state) {
case IEEE80211_IBSS_MLME_SEARCH:
ieee80211_sta_find_ibss(sdata);
@@ -934,6 +1008,8 @@ void ieee80211_ibss_setup_sdata(struct i
setup_timer(&ifibss->timer, ieee80211_ibss_timer,
(unsigned long) sdata);
mutex_init(&ifibss->mtx);
+ INIT_LIST_HEAD(&ifibss->incomplete_stations);
+ spin_lock_init(&ifibss->incomplete_lock);
}
/* scan finished notification */
@@ -1050,6 +1126,7 @@ int ieee80211_ibss_leave(struct ieee8021
struct cfg80211_bss *cbss;
u16 capability;
int active_ibss;
+ struct sta_info *sta;
mutex_lock(&sdata->u.ibss.mtx);
@@ -1078,6 +1155,19 @@ int ieee80211_ibss_leave(struct ieee8021
}
sta_info_flush(sdata->local, sdata);
+
+ spin_lock_bh(&ifibss->incomplete_lock);
+ while (!list_empty(&ifibss->incomplete_stations)) {
+ sta = list_first_entry(&ifibss->incomplete_stations,
+ struct sta_info, list);
+ list_del(&sta->list);
+ spin_unlock_bh(&ifibss->incomplete_lock);
+
+ sta_info_free(local, sta);
+ spin_lock_bh(&ifibss->incomplete_lock);
+ }
+ spin_unlock_bh(&ifibss->incomplete_lock);
+
netif_carrier_off(sdata->dev);
/* remove beacon */
--- a/net/mac80211/ieee80211_i.h 2011-12-14 13:29:08.000000000 +0100
+++ b/net/mac80211/ieee80211_i.h 2011-12-14 13:57:54.000000000 +0100
@@ -482,6 +482,9 @@ struct ieee80211_if_ibss {
struct sk_buff __rcu *presp;
struct sk_buff *skb;
+ spinlock_t incomplete_lock;
+ struct list_head incomplete_stations;
+
enum {
IEEE80211_IBSS_MLME_SEARCH,
IEEE80211_IBSS_MLME_JOINED,
@@ -1172,9 +1175,8 @@ void ieee80211_sta_reset_conn_monitor(st
/* IBSS code */
void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local);
void ieee80211_ibss_setup_sdata(struct ieee80211_sub_if_data *sdata);
-struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
- u8 *bssid, u8 *addr, u32 supp_rates,
- gfp_t gfp);
+void ieee80211_ibss_rx_no_sta(struct ieee80211_sub_if_data *sdata,
+ const u8 *bssid, const u8 *addr, u32 supp_rates);
int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
struct cfg80211_ibss_params *params);
int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata);
--- a/net/mac80211/rx.c 2011-12-14 13:29:08.000000000 +0100
+++ b/net/mac80211/rx.c 2011-12-14 13:29:12.000000000 +0100
@@ -2775,8 +2775,8 @@ static int prepare_for_handlers(struct i
rate_idx = 0; /* TODO: HT rates */
else
rate_idx = status->rate_idx;
- rx->sta = ieee80211_ibss_add_sta(sdata, bssid,
- hdr->addr2, BIT(rate_idx), GFP_ATOMIC);
+ ieee80211_ibss_rx_no_sta(sdata, bssid, hdr->addr2,
+ BIT(rate_idx));
}
break;
case NL80211_IFTYPE_MESH_POINT:
--- a/net/mac80211/sta_info.c 2011-12-14 13:33:13.000000000 +0100
+++ b/net/mac80211/sta_info.c 2011-12-14 13:58:04.000000000 +0100
@@ -1521,7 +1521,7 @@ EXPORT_SYMBOL(ieee80211_sta_set_buffered
int sta_info_move_state_checked(struct sta_info *sta,
enum ieee80211_sta_state new_state)
{
- /* might_sleep(); -- for driver notify later, fix IBSS first */
+ might_sleep();
if (sta->sta_state == new_state)
return 0;
next prev parent reply other threads:[~2011-12-14 13:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-14 13:03 [PATCH 0/2] station management complexity reduction Johannes Berg
2011-12-14 13:03 ` Johannes Berg [this message]
2011-12-15 10:17 ` [PATCH v2 1/2] mac80211: delay IBSS station insertion Johannes Berg
2011-12-14 13:03 ` [PATCH 2/2] mac80211: reduce station management complexity Johannes Berg
2011-12-15 10:24 ` [PATCH v2 " Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111214130549.059007128@sipsolutions.net \
--to=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.