All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: Re: [PATCH 3/4] at91: add at91_udc resource
Date: Wed, 14 Dec 2011 16:37:59 +0100	[thread overview]
Message-ID: <20111214153759.GD7553@game.jcrosoft.org> (raw)
In-Reply-To: <1323701217-26236-3-git-send-email-plagnioj@jcrosoft.com>

Hi,

	do not forget this one otherwise the usb device will not compile

Best Regards,
J.
On 15:46 Mon 12 Dec     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> this device controller is present on rm9200/9260/9g20/9261/9g10/9263
> 
> the 9g45 use an other IP
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/mach-at91/at91rm9200_devices.c  |   21 +++++++++++++++++++++
>  arch/arm/mach-at91/at91sam9260_devices.c |   19 +++++++++++++++++++
>  arch/arm/mach-at91/at91sam9261_devices.c |   19 +++++++++++++++++++
>  arch/arm/mach-at91/at91sam9263_devices.c |   19 +++++++++++++++++++
>  4 files changed, 78 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
> index bd7d3f0..8c19846 100644
> --- a/arch/arm/mach-at91/at91rm9200_devices.c
> +++ b/arch/arm/mach-at91/at91rm9200_devices.c
> @@ -42,6 +42,27 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
>  void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
>  #endif
>  
> +/* --------------------------------------------------------------------
> + *  USB Device (Gadget)
> + * -------------------------------------------------------------------- */
> +
> +#ifdef CONFIG_USB_GADGET_DRIVER_AT91
> +void __init at91_add_device_udc(struct at91_udc_data *data)
> +{
> +	if (data->vbus_pin > 0) {
> +		at91_set_gpio_input(data->vbus_pin, 0);
> +		at91_set_deglitch(data->vbus_pin, 1);
> +	}
> +
> +	if (data->pullup_pin > 0)
> +		at91_set_gpio_output(data->pullup_pin, 0);
> +
> +	add_generic_device("at91_udc", -1, NULL, AT91RM9200_BASE_UDP, SZ_16K,
> +			   IORESOURCE_MEM, data);
> +}
> +#else
> +void __init at91_add_device_udc(struct at91_udc_data *data) {}
> +#endif
>  
>  /* --------------------------------------------------------------------
>   *  Ethernet
> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
> index be1fdd9..945530f 100644
> --- a/arch/arm/mach-at91/at91sam9260_devices.c
> +++ b/arch/arm/mach-at91/at91sam9260_devices.c
> @@ -39,6 +39,25 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
>  void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
>  #endif
>  
> +/* --------------------------------------------------------------------
> + *  USB Device (Gadget)
> + * -------------------------------------------------------------------- */
> +
> +#ifdef CONFIG_USB_GADGET_DRIVER_AT91
> +void __init at91_add_device_udc(struct at91_udc_data *data)
> +{
> +	if (data->vbus_pin > 0) {
> +		at91_set_gpio_input(data->vbus_pin, 0);
> +		at91_set_deglitch(data->vbus_pin, 1);
> +	}
> +
> +	add_generic_device("at91_udc", -1, NULL, AT91SAM9260_BASE_UDP, SZ_16K,
> +			   IORESOURCE_MEM, data);
> +}
> +#else
> +void __init at91_add_device_udc(struct at91_udc_data *data) {}
> +#endif
> +
>  #if defined(CONFIG_DRIVER_NET_MACB)
>  void at91_add_device_eth(struct at91_ether_platform_data *data)
>  {
> diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
> index 3f69b18..4fd3c79 100644
> --- a/arch/arm/mach-at91/at91sam9261_devices.c
> +++ b/arch/arm/mach-at91/at91sam9261_devices.c
> @@ -43,6 +43,25 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
>  void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
>  #endif
>  
> +/* --------------------------------------------------------------------
> + *  USB Device (Gadget)
> + * -------------------------------------------------------------------- */
> +
> +#ifdef CONFIG_USB_GADGET_DRIVER_AT91
> +void __init at91_add_device_udc(struct at91_udc_data *data)
> +{
> +	if (data->vbus_pin > 0) {
> +		at91_set_gpio_input(data->vbus_pin, 0);
> +		at91_set_deglitch(data->vbus_pin, 1);
> +	}
> +
> +	add_generic_device("at91_udc", -1, NULL, AT91SAM9261_BASE_UDP, SZ_16K,
> +			   IORESOURCE_MEM, data);
> +}
> +#else
> +void __init at91_add_device_udc(struct at91_udc_data *data) {}
> +#endif
> +
>  #if defined(CONFIG_NAND_ATMEL)
>  void at91_add_device_nand(struct atmel_nand_data *data)
>  {
> diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
> index 994a975..bbadc5d 100644
> --- a/arch/arm/mach-at91/at91sam9263_devices.c
> +++ b/arch/arm/mach-at91/at91sam9263_devices.c
> @@ -51,6 +51,25 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
>  void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
>  #endif
>  
> +/* --------------------------------------------------------------------
> + *  USB Device (Gadget)
> + * -------------------------------------------------------------------- */
> +
> +#ifdef CONFIG_USB_GADGET_DRIVER_AT91
> +void __init at91_add_device_udc(struct at91_udc_data *data)
> +{
> +	if (data->vbus_pin > 0) {
> +		at91_set_gpio_input(data->vbus_pin, 0);
> +		at91_set_deglitch(data->vbus_pin, 1);
> +	}
> +
> +	add_generic_device("at91_udc", -1, NULL, AT91SAM9263_BASE_UDP, SZ_16K,
> +			   IORESOURCE_MEM, data);
> +}
> +#else
> +void __init at91_add_device_udc(struct at91_udc_data *data) {}
> +#endif
> +
>  #if defined(CONFIG_DRIVER_NET_MACB)
>  void at91_add_device_eth(struct at91_ether_platform_data *data)
>  {
> -- 
> 1.7.7

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2011-12-14 15:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-12 14:46 [PATCH 1/4] at91sam9263: fix mci clock Jean-Christophe PLAGNIOL-VILLARD
2011-12-12 14:46 ` [PATCH 2/4] at91: add udc usb device controller support Jean-Christophe PLAGNIOL-VILLARD
2011-12-13 10:37   ` Sascha Hauer
2011-12-13 15:06   ` [PATCH 2/4 V2] " Jean-Christophe PLAGNIOL-VILLARD
2011-12-12 14:46 ` [PATCH 3/4] at91: add at91_udc resource Jean-Christophe PLAGNIOL-VILLARD
2011-12-14 15:37   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2011-12-12 14:46 ` [PATCH 4/4] usb-a926x: add usb device support Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111214153759.GD7553@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.