[PATCH] pxa/hx4700: Fix PXA_GPIO_IRQ_BASE/IRQ_NUM values

[mad_soft@inbox.ru (Dmitry Artamonow)]

On 15:12 Wed 21 Dec     , Philipp Zabel wrote:
> Hello Paul,
> 
> On Mon, Dec 12, 2011 at 11:21 PM, Paul Parsons <lost.distance@yahoo.com> wrote:
> > linux-2.6.32 changed the values of PXA_GPIO_IRQ_BASE and PXA_GPIO_IRQ_NUM from
> > 64/128 to 96/192. This has broken the hx4700 platform, for example its PCMCIA/CF
> > driver. The 9 EGPIO GPIOs have become numbered 256..264, and consequently fail
> > the gpio_is_valid() test in gpiolib.c (which limits GPIOs to the range 0..255).
> > This patch reverts the values of PXA_GPIO_IRQ_BASE and PXA_GPIO_IRQ_NUM to their
> > previous linux-2.6.31 values for the hx4700 platform only.
> >
> > Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
> > ---

[...]

> > +#ifdef CONFIG_MACH_H4700
> > +#define PXA_GPIO_IRQ_BASE ? ? ?PXA_IRQ(64)
> > +#define PXA_GPIO_IRQ_NUM ? ? ? (128)
> > +#else
> > ?#define PXA_GPIO_IRQ_BASE ? ? ?PXA_IRQ(96)
> > ?#define PXA_GPIO_IRQ_NUM ? ? ? (192)
> > +#endif
> 
> machine specific definitions were removed from mach/irqs.h in commits
> 0dc726bb264ca5ecfdfab94a6937e0e9b9b26f64 ([ARM] pxa: move board board
> IRQ definitions out of irqs.h) and
> 6ac6b817f3f4c23c5febd960d8deb343e13af5f3 (ARM: pxa: encode IRQ number
> into .nr_irqs).
> I'd propose to increase ARCH_NR_GPIOs to 264 in mach/gpio.h or
> plat/gpio.h instead.

Yes, I also think increasing ARCH_NR_GPIO is the way to go.
BTW, there's a patchset floating around which moves such custom
settings of ARCH_NR_GPIO from mach/gpio.h into Kconfig variable:
http://lkml.indiana.edu/hypermail/linux/kernel/1111.0/01433.html

I'm not sure though if it's going to be merged into 3.3

-- 
Best regards,
Dmitry "MAD" Artamonow