From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org,
lwn@lwn.net
Subject: Re: Linux 3.0.17
Date: Thu, 12 Jan 2012 12:21:49 -0800 [thread overview]
Message-ID: <20120112202149.GB15607@kroah.com> (raw)
In-Reply-To: <20120112202136.GA15607@kroah.com>
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 81bc1a9..f7ade3b 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -275,8 +275,8 @@ versions.
If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
kernel is the current stable kernel.
-2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
-released as needs dictate. The normal release period is approximately
+2.6.x.y are maintained by the "stable" team <stable@vger.kernel.org>, and
+are released as needs dictate. The normal release period is approximately
two weeks, but it can be longer if there are no pressing problems. A
security-related problem, instead, can cause a release to happen almost
instantly.
diff --git a/Documentation/development-process/5.Posting b/Documentation/development-process/5.Posting
index 903a254..8a48c9b 100644
--- a/Documentation/development-process/5.Posting
+++ b/Documentation/development-process/5.Posting
@@ -271,10 +271,10 @@ copies should go to:
the linux-kernel list.
- If you are fixing a bug, think about whether the fix should go into the
- next stable update. If so, stable@kernel.org should get a copy of the
- patch. Also add a "Cc: stable@kernel.org" to the tags within the patch
- itself; that will cause the stable team to get a notification when your
- fix goes into the mainline.
+ next stable update. If so, stable@vger.kernel.org should get a copy of
+ the patch. Also add a "Cc: stable@vger.kernel.org" to the tags within
+ the patch itself; that will cause the stable team to get a notification
+ when your fix goes into the mainline.
When selecting recipients for a patch, it is good to have an idea of who
you think will eventually accept the patch and get it merged. While it
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index a4efa04..5335fa8 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -47,10 +47,11 @@ This allows to filter away annoying devices that talk continuously.
2. Find which bus connects to the desired device
-Run "cat /proc/bus/usb/devices", and find the T-line which corresponds to
-the device. Usually you do it by looking for the vendor string. If you have
-many similar devices, unplug one and compare two /proc/bus/usb/devices outputs.
-The T-line will have a bus number. Example:
+Run "cat /sys/kernel/debug/usb/devices", and find the T-line which corresponds
+to the device. Usually you do it by looking for the vendor string. If you have
+many similar devices, unplug one and compare the two
+/sys/kernel/debug/usb/devices outputs. The T-line will have a bus number.
+Example:
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
@@ -58,7 +59,10 @@ P: Vendor=0557 ProdID=2004 Rev= 1.00
S: Manufacturer=ATEN
S: Product=UC100KM V2.00
-Bus=03 means it's bus 3.
+"Bus=03" means it's bus 3. Alternatively, you can look at the output from
+"lsusb" and get the bus number from the appropriate line. Example:
+
+Bus 003 Device 002: ID 0557:2004 ATEN UC100KM V2.00
3. Start 'cat'
diff --git a/MAINTAINERS b/MAINTAINERS
index 34e2418..de85391 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6039,7 +6039,7 @@ F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
M: Greg Kroah-Hartman <greg@kroah.com>
-L: stable@kernel.org
+L: stable@vger.kernel.org
S: Maintained
STAGING SUBSYSTEM
diff --git a/Makefile b/Makefile
index 7f0d8e2..295fbda 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 0
-SUBLEVEL = 16
+SUBLEVEL = 17
EXTRAVERSION =
NAME = Sneaky Weasel
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index fe6f7c2..bc3c745 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -219,5 +219,7 @@ DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
extern void secondary_cpu_time_init(void);
extern void iSeries_time_init_early(void);
+extern void decrementer_check_overflow(void);
+
#endif /* __KERNEL__ */
#endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 5b428e3..ca2987d 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -170,16 +170,13 @@ notrace void arch_local_irq_restore(unsigned long en)
*/
local_paca->hard_enabled = en;
-#ifndef CONFIG_BOOKE
- /* On server, re-trigger the decrementer if it went negative since
- * some processors only trigger on edge transitions of the sign bit.
- *
- * BookE has a level sensitive decrementer (latches in TSR) so we
- * don't need that
+ /*
+ * Trigger the decrementer if we have a pending event. Some processors
+ * only trigger on edge transitions of the sign bit. We might also
+ * have disabled interrupts long enough that the decrementer wrapped
+ * to positive.
*/
- if ((int)mfspr(SPRN_DEC) < 0)
- mtspr(SPRN_DEC, 1);
-#endif /* CONFIG_BOOKE */
+ decrementer_check_overflow();
/*
* Force the delivery of pending soft-disabled interrupts on PS3.
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 03b29a6..2de304a 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -889,6 +889,15 @@ static void __init clocksource_init(void)
clock->name, clock->mult, clock->shift);
}
+void decrementer_check_overflow(void)
+{
+ u64 now = get_tb_or_rtc();
+ struct decrementer_clock *decrementer = &__get_cpu_var(decrementers);
+
+ if (now >= decrementer->next_tb)
+ set_dec(1);
+}
+
static int decrementer_set_next_event(unsigned long evt,
struct clock_event_device *dev)
{
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index f106662..c9311cf 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -109,7 +109,7 @@ static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long
if (opcode > MAX_HCALL_OPCODE)
return;
- h = &get_cpu_var(hcall_stats)[opcode / 4];
+ h = &__get_cpu_var(hcall_stats)[opcode / 4];
h->tb_start = mftb();
h->purr_start = mfspr(SPRN_PURR);
}
@@ -126,8 +126,6 @@ static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long
h->num_calls++;
h->tb_total += mftb() - h->tb_start;
h->purr_total += mfspr(SPRN_PURR) - h->purr_start;
-
- put_cpu_var(hcall_stats);
}
static int __init hcall_inst_init(void)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index ed96b37..81e30d9 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -745,6 +745,7 @@ void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
goto out;
(*depth)++;
+ preempt_disable();
trace_hcall_entry(opcode, args);
(*depth)--;
@@ -767,6 +768,7 @@ void __trace_hcall_exit(long opcode, unsigned long retval,
(*depth)++;
trace_hcall_exit(opcode, retval, retbuf);
+ preempt_enable();
(*depth)--;
out:
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 06ed6b4..3719c94 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -226,13 +226,13 @@ static ssize_t firmware_loading_store(struct device *dev,
int loading = simple_strtol(buf, NULL, 10);
int i;
+ mutex_lock(&fw_lock);
+
+ if (!fw_priv->fw)
+ goto out;
+
switch (loading) {
case 1:
- mutex_lock(&fw_lock);
- if (!fw_priv->fw) {
- mutex_unlock(&fw_lock);
- break;
- }
firmware_free_data(fw_priv->fw);
memset(fw_priv->fw, 0, sizeof(struct firmware));
/* If the pages are not owned by 'struct firmware' */
@@ -243,7 +243,6 @@ static ssize_t firmware_loading_store(struct device *dev,
fw_priv->page_array_size = 0;
fw_priv->nr_pages = 0;
set_bit(FW_STATUS_LOADING, &fw_priv->status);
- mutex_unlock(&fw_lock);
break;
case 0:
if (test_bit(FW_STATUS_LOADING, &fw_priv->status)) {
@@ -274,7 +273,8 @@ static ssize_t firmware_loading_store(struct device *dev,
fw_load_abort(fw_priv);
break;
}
-
+out:
+ mutex_unlock(&fw_lock);
return count;
}
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index d8ca0a0..65df26c 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -2076,9 +2076,11 @@ static void qib_6120_config_ctxts(struct qib_devdata *dd)
static void qib_update_6120_usrhead(struct qib_ctxtdata *rcd, u64 hd,
u32 updegr, u32 egrhd, u32 npkts)
{
- qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
if (updegr)
qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
+ mmiowb();
+ qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+ mmiowb();
}
static u32 qib_6120_hdrqempty(struct qib_ctxtdata *rcd)
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index c765a2e..759bb63 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -2704,9 +2704,11 @@ static int qib_7220_set_loopback(struct qib_pportdata *ppd, const char *what)
static void qib_update_7220_usrhead(struct qib_ctxtdata *rcd, u64 hd,
u32 updegr, u32 egrhd, u32 npkts)
{
- qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
if (updegr)
qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
+ mmiowb();
+ qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+ mmiowb();
}
static u32 qib_7220_hdrqempty(struct qib_ctxtdata *rcd)
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 8ec5237..49e4a58 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -4060,10 +4060,12 @@ static void qib_update_7322_usrhead(struct qib_ctxtdata *rcd, u64 hd,
*/
if (hd >> IBA7322_HDRHEAD_PKTINT_SHIFT)
adjust_rcv_timeout(rcd, npkts);
- qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
- qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
if (updegr)
qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
+ mmiowb();
+ qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+ qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+ mmiowb();
}
static u32 qib_7322_hdrqempty(struct qib_ctxtdata *rcd)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2065cb4..0b65c5f 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1905,7 +1905,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
"but new slave device does not support netpoll.\n",
bond_dev->name);
res = -EBUSY;
- goto err_close;
+ goto err_detach;
}
}
#endif
@@ -1914,7 +1914,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
res = bond_create_slave_symlinks(bond_dev, slave_dev);
if (res)
- goto err_close;
+ goto err_detach;
res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
new_slave);
@@ -1935,6 +1935,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
err_dest_symlinks:
bond_destroy_slave_symlinks(bond_dev, slave_dev);
+err_detach:
+ write_lock_bh(&bond->lock);
+ bond_detach_slave(bond, new_slave);
+ write_unlock_bh(&bond->lock);
+
err_close:
dev_close(slave_dev);
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index c5c4b4d..7105577 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -371,7 +371,7 @@ static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
skb_pull(skb, (size + 1) & 0xfffe);
- if (skb->len == 0)
+ if (skb->len < sizeof(header))
break;
head = (u8 *) skb->data;
@@ -1560,6 +1560,10 @@ static const struct usb_device_id products [] = {
// ASIX 88772a
USB_DEVICE(0x0db0, 0xa877),
.driver_info = (unsigned long) &ax88772_info,
+}, {
+ // Asus USB Ethernet Adapter
+ USB_DEVICE (0x0b95, 0x7e2b),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 6e7fe94..d4e9eac 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -878,6 +878,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x13b1, 0x0031) },
{ USB_DEVICE(0x1737, 0x0070) },
{ USB_DEVICE(0x1737, 0x0071) },
+ { USB_DEVICE(0x1737, 0x0077) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0162) },
{ USB_DEVICE(0x0789, 0x0163) },
@@ -1069,7 +1070,6 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x1740, 0x0605) },
{ USB_DEVICE(0x1740, 0x0615) },
/* Linksys */
- { USB_DEVICE(0x1737, 0x0077) },
{ USB_DEVICE(0x1737, 0x0078) },
/* Logitec */
{ USB_DEVICE(0x0789, 0x0168) },
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index b07f8b7..e0e1688 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -328,6 +328,9 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
nvs_ptr += 3;
for (i = 0; i < burst_len; i++) {
+ if (nvs_ptr + 3 >= (u8 *) wl->nvs + nvs_len)
+ goto out_badnvs;
+
val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
| (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
@@ -339,6 +342,9 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
nvs_ptr += 4;
dest_addr += 4;
}
+
+ if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
+ goto out_badnvs;
}
/*
@@ -350,6 +356,10 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
*/
nvs_ptr = (u8 *)wl->nvs +
ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
+
+ if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
+ goto out_badnvs;
+
nvs_len -= nvs_ptr - (u8 *)wl->nvs;
/* Now we must set the partition correctly */
@@ -365,6 +375,10 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
kfree(nvs_aligned);
return 0;
+
+out_badnvs:
+ wl1271_error("nvs data is malformed");
+ return -EILSEQ;
}
static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 42935ac..b8ec8cd 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -121,6 +121,11 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
if (!wl->nvs)
return -ENODEV;
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from INI out of bounds");
+ return -EINVAL;
+ }
+
gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
if (!gen_parms)
return -ENOMEM;
@@ -144,6 +149,12 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
gp->tx_bip_fem_manufacturer =
gen_parms->general_params.tx_bip_fem_manufacturer;
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from FW out of bounds");
+ ret = -EINVAL;
+ goto out;
+ }
+
wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
@@ -163,6 +174,11 @@ int wl128x_cmd_general_parms(struct wl1271 *wl)
if (!wl->nvs)
return -ENODEV;
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from ini out of bounds");
+ return -EINVAL;
+ }
+
gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
if (!gen_parms)
return -ENOMEM;
@@ -187,6 +203,12 @@ int wl128x_cmd_general_parms(struct wl1271 *wl)
gp->tx_bip_fem_manufacturer =
gen_parms->general_params.tx_bip_fem_manufacturer;
+ if (gp->tx_bip_fem_manufacturer >= WL1271_INI_FEM_MODULE_COUNT) {
+ wl1271_warning("FEM index from FW out of bounds");
+ ret = -EINVAL;
+ goto out;
+ }
+
wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index f88e52a..c79857e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -7211,6 +7211,7 @@ _scsih_remove(struct pci_dev *pdev)
}
sas_remove_host(shost);
+ mpt2sas_base_detach(ioc);
list_del(&ioc->list);
scsi_remove_host(shost);
scsi_host_put(shost);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index af9b781..b989495 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -199,8 +199,9 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int mode;
+ unsigned long flags;
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
/* Disable interrupts */
UART_PUT_IDR(port, atmel_port->tx_done_mask);
@@ -231,7 +232,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
/* Enable interrupts */
UART_PUT_IER(port, atmel_port->tx_done_mask);
- spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 8faa23c..158f631 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -554,10 +554,18 @@ static void acm_port_down(struct acm *acm)
static void acm_tty_hangup(struct tty_struct *tty)
{
- struct acm *acm = tty->driver_data;
- tty_port_hangup(&acm->port);
+ struct acm *acm;
+
mutex_lock(&open_mutex);
+ acm = tty->driver_data;
+
+ if (!acm)
+ goto out;
+
+ tty_port_hangup(&acm->port);
acm_port_down(acm);
+
+out:
mutex_unlock(&open_mutex);
}
@@ -1183,6 +1191,8 @@ made_compressed_probe:
i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
if (i < 0) {
kfree(acm->country_codes);
+ acm->country_codes = NULL;
+ acm->country_code_size = 0;
goto skip_countries;
}
@@ -1191,6 +1201,8 @@ made_compressed_probe:
if (i < 0) {
device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
kfree(acm->country_codes);
+ acm->country_codes = NULL;
+ acm->country_code_size = 0;
goto skip_countries;
}
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 39ea00b..691d212 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1387,11 +1387,10 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
ret = -EAGAIN;
else
urb->transfer_flags |= URB_DMA_MAP_SG;
- if (n != urb->num_sgs) {
- urb->num_sgs = n;
+ urb->num_mapped_sgs = n;
+ if (n != urb->num_sgs)
urb->transfer_flags |=
URB_DMA_SG_COMBINED;
- }
} else if (urb->sg) {
struct scatterlist *sg = urb->sg;
urb->transfer_dma = dma_map_page(
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index ecf12e1..4c65eb6 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -117,9 +117,12 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
- /* Guillemot Webcam Hercules Dualpix Exchange*/
+ /* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Guillemot Webcam Hercules Dualpix Exchange*/
+ { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 0917e3a..2499b3b 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -649,7 +649,7 @@ qh_urb_transaction (
/*
* data transfer stage: buffer setup
*/
- i = urb->num_sgs;
+ i = urb->num_mapped_sgs;
if (len > 0 && i > 0) {
sg = urb->sg;
buf = sg_dma_address(sg);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f9cf3f0..23107e2 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd)
struct ohci_hcd *ohci;
ohci = hcd_to_ohci (hcd);
- ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
- ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+ ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable);
- /* If the SHUTDOWN quirk is set, don't put the controller in RESET */
- ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ?
- OHCI_CTRL_RWC | OHCI_CTRL_HCFS :
- OHCI_CTRL_RWC);
- ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
+ /* Software reset, after which the controller goes into SUSPEND */
+ ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus);
+ ohci_readl(ohci, &ohci->regs->cmdstatus); /* flush the writes */
+ udelay(10);
- /* flush the writes */
- (void) ohci_readl (ohci, &ohci->regs->control);
+ ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval);
}
static int check_ed(struct ohci_hcd *ohci, struct ed *ed)
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index ad8166c..bc01b06 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
return 0;
}
-/* nVidia controllers continue to drive Reset signalling on the bus
- * even after system shutdown, wasting power. This flag tells the
- * shutdown routine to leave the controller OPERATIONAL instead of RESET.
- */
-static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd)
-{
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-
- /* Evidently nVidia fixed their later hardware; this is a guess at
- * the changeover point.
- */
-#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB 0x026d
-
- if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) {
- ohci->flags |= OHCI_QUIRK_SHUTDOWN;
- ohci_dbg(ohci, "enabled nVidia shutdown quirk\n");
- }
-
- return 0;
-}
-
static void sb800_prefetch(struct ohci_hcd *ohci, int on)
{
struct pci_dev *pdev;
@@ -260,10 +238,6 @@ static const struct pci_device_id ohci_pci_quirks[] = {
PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
.driver_data = (unsigned long)ohci_quirk_amd700,
},
- {
- PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
- .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown,
- },
/* FIXME for some of the early AMD 760 southbridges, OHCI
* won't work at all. blacklist them.
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 35e5fd6..0795b93 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -403,7 +403,6 @@ struct ohci_hcd {
#define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */
#define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/
#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */
-#define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */
// there are also chip quirks/bugs in init logic
struct work_struct nec_work; /* Worker for NEC quirk */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index a495d48..23e04fb 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -36,6 +36,7 @@
#define OHCI_INTRENABLE 0x10
#define OHCI_INTRDISABLE 0x14
#define OHCI_FMINTERVAL 0x34
+#define OHCI_HCFS (3 << 6) /* hc functional state */
#define OHCI_HCR (1 << 0) /* host controller reset */
#define OHCI_OCR (1 << 3) /* ownership change request */
#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
@@ -465,6 +466,8 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
{
void __iomem *base;
u32 control;
+ u32 fminterval;
+ int cnt;
if (!mmio_resource_enabled(pdev, 0))
return;
@@ -497,41 +500,32 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
}
#endif
- /* reset controller, preserving RWC (and possibly IR) */
- writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
- readl(base + OHCI_CONTROL);
+ /* disable interrupts */
+ writel((u32) ~0, base + OHCI_INTRDISABLE);
- /* Some NVIDIA controllers stop working if kept in RESET for too long */
- if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
- u32 fminterval;
- int cnt;
+ /* Reset the USB bus, if the controller isn't already in RESET */
+ if (control & OHCI_HCFS) {
+ /* Go into RESET, preserving RWC (and possibly IR) */
+ writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL);
+ readl(base + OHCI_CONTROL);
- /* drive reset for at least 50 ms (7.1.7.5) */
+ /* drive bus reset for at least 50 ms (7.1.7.5) */
msleep(50);
+ }
- /* software reset of the controller, preserving HcFmInterval */
- fminterval = readl(base + OHCI_FMINTERVAL);
- writel(OHCI_HCR, base + OHCI_CMDSTATUS);
+ /* software reset of the controller, preserving HcFmInterval */
+ fminterval = readl(base + OHCI_FMINTERVAL);
+ writel(OHCI_HCR, base + OHCI_CMDSTATUS);
- /* reset requires max 10 us delay */
- for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
- if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
- break;
- udelay(1);
- }
- writel(fminterval, base + OHCI_FMINTERVAL);
-
- /* Now we're in the SUSPEND state with all devices reset
- * and wakeups and interrupts disabled
- */
+ /* reset requires max 10 us delay */
+ for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */
+ if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0)
+ break;
+ udelay(1);
}
+ writel(fminterval, base + OHCI_FMINTERVAL);
- /*
- * disable interrupts
- */
- writel(~(u32)0, base + OHCI_INTRDISABLE);
- writel(~(u32)0, base + OHCI_INTRSTATUS);
-
+ /* Now the controller is safely in SUSPEND and nothing can wake it up */
iounmap(base);
}
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 84ed28b..8253991 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -943,7 +943,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb,
if (usb_pipein(urb->pipe))
status |= TD_CTRL_SPD;
- i = urb->num_sgs;
+ i = urb->num_mapped_sgs;
if (len > 0 && i > 0) {
sg = urb->sg;
data = sg_dma_address(sg);
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index a403b53..76083ae 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -443,7 +443,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u
remaining = urb->transfer_buffer_length;
- for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
dma_addr_t dma_addr;
size_t dma_remaining;
dma_addr_t sp, ep;
@@ -561,7 +561,7 @@ static int qset_add_urb_sg_linearize(struct whc *whc, struct whc_qset *qset,
remaining = urb->transfer_buffer_length;
- for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
size_t len;
size_t sg_remaining;
void *orig;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b4b0691..c0c5d6c 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2570,7 +2570,7 @@ static unsigned int count_sg_trbs_needed(struct xhci_hcd *xhci, struct urb *urb)
struct scatterlist *sg;
sg = NULL;
- num_sgs = urb->num_sgs;
+ num_sgs = urb->num_mapped_sgs;
temp = urb->transfer_buffer_length;
xhci_dbg(xhci, "count sg list trbs: \n");
@@ -2754,7 +2754,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
return -EINVAL;
num_trbs = count_sg_trbs_needed(xhci, urb);
- num_sgs = urb->num_sgs;
+ num_sgs = urb->num_mapped_sgs;
total_packet_count = roundup(urb->transfer_buffer_length,
le16_to_cpu(urb->ep->desc.wMaxPacketSize));
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 221f14e..107438e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1568,6 +1568,7 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
/* FIXME: can we allocate more resources for the HC? */
break;
case COMP_BW_ERR:
+ case COMP_2ND_BW_ERR:
dev_warn(&udev->dev, "Not enough bandwidth "
"for new device state.\n");
ret = -ENOSPC;
@@ -2183,8 +2184,7 @@ static int xhci_calculate_streams_and_bitmask(struct xhci_hcd *xhci,
if (ret < 0)
return ret;
- max_streams = USB_SS_MAX_STREAMS(
- eps[i]->ss_ep_comp.bmAttributes);
+ max_streams = usb_ss_max_streams(&eps[i]->ss_ep_comp);
if (max_streams < (*num_streams - 1)) {
xhci_dbg(xhci, "Ep 0x%x only supports %u stream IDs.\n",
eps[i]->desc.bEndpointAddress,
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 49ce76c..3e7c3a6 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -900,7 +900,6 @@ struct xhci_transfer_event {
/* Invalid Stream ID Error */
#define COMP_STRID_ERR 34
/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
-/* FIXME - check for this */
#define COMP_2ND_BW_ERR 35
/* Split Transaction Error */
#define COMP_SPLIT_ERR 36
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index fe1d443..8f725f6 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -55,8 +55,9 @@ static int isight_firmware_load(struct usb_interface *intf,
ptr = firmware->data;
+ buf[0] = 0x01;
if (usb_control_msg
- (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
300) != 1) {
printk(KERN_ERR
"Failed to initialise isight firmware loader\n");
@@ -100,8 +101,9 @@ static int isight_firmware_load(struct usb_interface *intf,
}
}
+ buf[0] = 0x00;
if (usb_control_msg
- (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, buf, 1,
300) != 1) {
printk(KERN_ERR "isight firmware loading completion failed\n");
ret = -ENODEV;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index dce7182..a0232a7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2078,8 +2078,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
if (status < 0)
goto fail3;
- pm_runtime_put(musb->controller);
-
status = musb_init_debugfs(musb);
if (status < 0)
goto fail4;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fd67cc5..a1a324b 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -92,6 +92,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+ { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 60f38d5..0a8c1e6 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -315,7 +315,7 @@ static int omninet_write_room(struct tty_struct *tty)
int room = 0; /* Default: no room */
/* FIXME: no consistent locking for write_urb_busy */
- if (wport->write_urb_busy)
+ if (!wport->write_urb_busy)
room = wport->bulk_out_size - OMNINET_HEADERLEN;
dbg("%s - returns %d", __func__, room);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d2becb9..c96b6b6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -472,6 +472,14 @@ static void option_instat_callback(struct urb *urb);
#define YUGA_PRODUCT_CLU528 0x260D
#define YUGA_PRODUCT_CLU526 0x260F
+/* Viettel products */
+#define VIETTEL_VENDOR_ID 0x2262
+#define VIETTEL_PRODUCT_VT1000 0x0002
+
+/* ZD Incorporated */
+#define ZD_VENDOR_ID 0x0685
+#define ZD_PRODUCT_7000 0x7000
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -1173,6 +1181,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) },
+ { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index c325e69..9e069ef 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -1073,6 +1073,7 @@ static struct usb_driver usb_storage_driver = {
.id_table = usb_storage_usb_ids,
.supports_autosuspend = 1,
.soft_unbind = 1,
+ .no_dynamic_id = 1,
};
static int __init usb_stor_init(void)
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index cb163a5..3251a02 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -100,36 +100,32 @@ static int offb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *info)
{
struct offb_par *par = (struct offb_par *) info->par;
- int i, depth;
- u32 *pal = info->pseudo_palette;
-
- depth = info->var.bits_per_pixel;
- if (depth == 16)
- depth = (info->var.green.length == 5) ? 15 : 16;
-
- if (regno > 255 ||
- (depth == 16 && regno > 63) ||
- (depth == 15 && regno > 31))
- return 1;
-
- if (regno < 16) {
- switch (depth) {
- case 15:
- pal[regno] = (regno << 10) | (regno << 5) | regno;
- break;
- case 16:
- pal[regno] = (regno << 11) | (regno << 5) | regno;
- break;
- case 24:
- pal[regno] = (regno << 16) | (regno << 8) | regno;
- break;
- case 32:
- i = (regno << 8) | regno;
- pal[regno] = (i << 16) | i;
- break;
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 *pal = info->pseudo_palette;
+ u32 cr = red >> (16 - info->var.red.length);
+ u32 cg = green >> (16 - info->var.green.length);
+ u32 cb = blue >> (16 - info->var.blue.length);
+ u32 value;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ value = (cr << info->var.red.offset) |
+ (cg << info->var.green.offset) |
+ (cb << info->var.blue.offset);
+ if (info->var.transp.length > 0) {
+ u32 mask = (1 << info->var.transp.length) - 1;
+ mask <<= info->var.transp.offset;
+ value |= mask;
}
+ pal[regno] = value;
+ return 0;
}
+ if (regno > 255)
+ return -EINVAL;
+
red >>= 8;
green >>= 8;
blue >>= 8;
@@ -381,7 +377,7 @@ static void __init offb_init_fb(const char *name, const char *full_name,
int pitch, unsigned long address,
int foreign_endian, struct device_node *dp)
{
- unsigned long res_size = pitch * height * (depth + 7) / 8;
+ unsigned long res_size = pitch * height;
struct offb_par *par = &default_par;
unsigned long res_start = address;
struct fb_fix_screeninfo *fix;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 3451d23..db9ba1a 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1568,7 +1568,13 @@ static int ext3_ordered_writepage(struct page *page,
int err;
J_ASSERT(PageLocked(page));
- WARN_ON_ONCE(IS_RDONLY(inode));
+ /*
+ * We don't want to warn for emergency remount. The condition is
+ * ordered to avoid dereferencing inode->i_sb in non-error case to
+ * avoid slow-downs.
+ */
+ WARN_ON_ONCE(IS_RDONLY(inode) &&
+ !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS));
/*
* We give up here if we're reentered, because it might be for a
@@ -1642,7 +1648,13 @@ static int ext3_writeback_writepage(struct page *page,
int err;
J_ASSERT(PageLocked(page));
- WARN_ON_ONCE(IS_RDONLY(inode));
+ /*
+ * We don't want to warn for emergency remount. The condition is
+ * ordered to avoid dereferencing inode->i_sb in non-error case to
+ * avoid slow-downs.
+ */
+ WARN_ON_ONCE(IS_RDONLY(inode) &&
+ !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS));
if (ext3_journal_current_handle())
goto out_fail;
@@ -1684,7 +1696,13 @@ static int ext3_journalled_writepage(struct page *page,
int err;
J_ASSERT(PageLocked(page));
- WARN_ON_ONCE(IS_RDONLY(inode));
+ /*
+ * We don't want to warn for emergency remount. The condition is
+ * ordered to avoid dereferencing inode->i_sb in non-error case to
+ * avoid slow-downs.
+ */
+ WARN_ON_ONCE(IS_RDONLY(inode) &&
+ !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ERROR_FS));
if (ext3_journal_current_handle())
goto no_write;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index aa91089..f19dfbf 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -453,16 +453,20 @@ int remove_save_link(struct inode *inode, int truncate)
static void reiserfs_kill_sb(struct super_block *s)
{
if (REISERFS_SB(s)) {
- if (REISERFS_SB(s)->xattr_root) {
- d_invalidate(REISERFS_SB(s)->xattr_root);
- dput(REISERFS_SB(s)->xattr_root);
- REISERFS_SB(s)->xattr_root = NULL;
- }
- if (REISERFS_SB(s)->priv_root) {
- d_invalidate(REISERFS_SB(s)->priv_root);
- dput(REISERFS_SB(s)->priv_root);
- REISERFS_SB(s)->priv_root = NULL;
- }
+ /*
+ * Force any pending inode evictions to occur now. Any
+ * inodes to be removed that have extended attributes
+ * associated with them need to clean them up before
+ * we can release the extended attribute root dentries.
+ * shrink_dcache_for_umount will BUG if we don't release
+ * those before it's called so ->put_super is too late.
+ */
+ shrink_dcache_sb(s);
+
+ dput(REISERFS_SB(s)->xattr_root);
+ REISERFS_SB(s)->xattr_root = NULL;
+ dput(REISERFS_SB(s)->priv_root);
+ REISERFS_SB(s)->priv_root = NULL;
}
kill_block_super(s);
@@ -1164,7 +1168,8 @@ static void handle_quota_files(struct super_block *s, char **qf_names,
kfree(REISERFS_SB(s)->s_qf_names[i]);
REISERFS_SB(s)->s_qf_names[i] = qf_names[i];
}
- REISERFS_SB(s)->s_jquota_fmt = *qfmt;
+ if (*qfmt)
+ REISERFS_SB(s)->s_jquota_fmt = *qfmt;
}
#endif
diff --git a/fs/udf/file.c b/fs/udf/file.c
index 2a346bb..0c0c9d3 100644
--- a/fs/udf/file.c
+++ b/fs/udf/file.c
@@ -125,7 +125,6 @@ static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
err = udf_expand_file_adinicb(inode);
if (err) {
udf_debug("udf_expand_adinicb: err=%d\n", err);
- up_write(&iinfo->i_data_sem);
return err;
}
} else {
@@ -133,9 +132,10 @@ static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
iinfo->i_lenAlloc = pos + count;
else
iinfo->i_lenAlloc = inode->i_size;
+ up_write(&iinfo->i_data_sem);
}
- }
- up_write(&iinfo->i_data_sem);
+ } else
+ up_write(&iinfo->i_data_sem);
retval = generic_file_aio_write(iocb, iov, nr_segs, ppos);
if (retval > 0)
diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 1d1358e..262050f 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -145,6 +145,12 @@ const struct address_space_operations udf_aops = {
.bmap = udf_bmap,
};
+/*
+ * Expand file stored in ICB to a normal one-block-file
+ *
+ * This function requires i_data_sem for writing and releases it.
+ * This function requires i_mutex held
+ */
int udf_expand_file_adinicb(struct inode *inode)
{
struct page *page;
@@ -163,9 +169,15 @@ int udf_expand_file_adinicb(struct inode *inode)
iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG;
/* from now on we have normal address_space methods */
inode->i_data.a_ops = &udf_aops;
+ up_write(&iinfo->i_data_sem);
mark_inode_dirty(inode);
return 0;
}
+ /*
+ * Release i_data_sem so that we can lock a page - page lock ranks
+ * above i_data_sem. i_mutex still protects us against file changes.
+ */
+ up_write(&iinfo->i_data_sem);
page = find_or_create_page(inode->i_mapping, 0, GFP_NOFS);
if (!page)
@@ -181,6 +193,7 @@ int udf_expand_file_adinicb(struct inode *inode)
SetPageUptodate(page);
kunmap(page);
}
+ down_write(&iinfo->i_data_sem);
memset(iinfo->i_ext.i_data + iinfo->i_lenEAttr, 0x00,
iinfo->i_lenAlloc);
iinfo->i_lenAlloc = 0;
@@ -190,17 +203,20 @@ int udf_expand_file_adinicb(struct inode *inode)
iinfo->i_alloc_type = ICBTAG_FLAG_AD_LONG;
/* from now on we have normal address_space methods */
inode->i_data.a_ops = &udf_aops;
+ up_write(&iinfo->i_data_sem);
err = inode->i_data.a_ops->writepage(page, &udf_wbc);
if (err) {
/* Restore everything back so that we don't lose data... */
lock_page(page);
kaddr = kmap(page);
+ down_write(&iinfo->i_data_sem);
memcpy(iinfo->i_ext.i_data + iinfo->i_lenEAttr, kaddr,
inode->i_size);
kunmap(page);
unlock_page(page);
iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
inode->i_data.a_ops = &udf_adinicb_aops;
+ up_write(&iinfo->i_data_sem);
}
page_cache_release(page);
mark_inode_dirty(inode);
@@ -1105,10 +1121,9 @@ int udf_setsize(struct inode *inode, loff_t newsize)
if (bsize <
(udf_file_entry_alloc_offset(inode) + newsize)) {
err = udf_expand_file_adinicb(inode);
- if (err) {
- up_write(&iinfo->i_data_sem);
+ if (err)
return err;
- }
+ down_write(&iinfo->i_data_sem);
} else
iinfo->i_lenAlloc = newsize;
}
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
index 4b9fb91..f86e034 100644
--- a/fs/xfs/linux-2.6/xfs_acl.c
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -39,7 +39,7 @@ xfs_acl_from_disk(struct xfs_acl *aclp)
struct posix_acl_entry *acl_e;
struct posix_acl *acl;
struct xfs_acl_entry *ace;
- int count, i;
+ unsigned int count, i;
count = be32_to_cpu(aclp->acl_cnt);
if (count > XFS_ACL_MAX_ENTRIES)
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 73c7df4..b08e04c 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1202,6 +1202,7 @@ struct urb {
void *transfer_buffer; /* (in) associated data buffer */
dma_addr_t transfer_dma; /* (in) dma addr for transfer_buffer */
struct scatterlist *sg; /* (in) scatter gather buffer list */
+ int num_mapped_sgs; /* (internal) mapped sg entries */
int num_sgs; /* (in) number of entries in the sg list */
u32 transfer_buffer_length; /* (in) data buffer length */
u32 actual_length; /* (return) actual transfer length */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 0fd3fbd..cf65b5c 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -583,8 +583,26 @@ struct usb_ss_ep_comp_descriptor {
} __attribute__ ((packed));
#define USB_DT_SS_EP_COMP_SIZE 6
+
/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
-#define USB_SS_MAX_STREAMS(p) (1 << ((p) & 0x1f))
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+ int max_streams;
+
+ if (!comp)
+ return 0;
+
+ max_streams = comp->bmAttributes & 0x1f;
+
+ if (!max_streams)
+ return 0;
+
+ max_streams = 1 << max_streams;
+
+ return max_streams;
+}
+
/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
#define USB_SS_MULT(p) (1 + ((p) & 0x3))
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 575a5e7..2efce77 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1173,10 +1173,10 @@ static int parse_cgroupfs_options(char *data, struct cgroup_sb_opts *opts)
/*
* If the 'all' option was specified select all the subsystems,
- * otherwise 'all, 'none' and a subsystem name options were not
- * specified, let's default to 'all'
+ * otherwise if 'none', 'name=' and a subsystem name options
+ * were not specified, let's default to 'all'
*/
- if (all_ss || (!all_ss && !one_ss && !opts->none)) {
+ if (all_ss || (!one_ss && !opts->none && !opts->name)) {
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
if (ss == NULL)
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 12b7458..aa39dd7 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -15,6 +15,7 @@
#include <linux/stop_machine.h>
#include <linux/mutex.h>
#include <linux/gfp.h>
+#include <linux/suspend.h>
#ifdef CONFIG_SMP
/* Serializes the updates to cpu_online_mask, cpu_present_mask */
@@ -476,6 +477,79 @@ static int alloc_frozen_cpus(void)
return 0;
}
core_initcall(alloc_frozen_cpus);
+
+/*
+ * Prevent regular CPU hotplug from racing with the freezer, by disabling CPU
+ * hotplug when tasks are about to be frozen. Also, don't allow the freezer
+ * to continue until any currently running CPU hotplug operation gets
+ * completed.
+ * To modify the 'cpu_hotplug_disabled' flag, we need to acquire the
+ * 'cpu_add_remove_lock'. And this same lock is also taken by the regular
+ * CPU hotplug path and released only after it is complete. Thus, we
+ * (and hence the freezer) will block here until any currently running CPU
+ * hotplug operation gets completed.
+ */
+void cpu_hotplug_disable_before_freeze(void)
+{
+ cpu_maps_update_begin();
+ cpu_hotplug_disabled = 1;
+ cpu_maps_update_done();
+}
+
+
+/*
+ * When tasks have been thawed, re-enable regular CPU hotplug (which had been
+ * disabled while beginning to freeze tasks).
+ */
+void cpu_hotplug_enable_after_thaw(void)
+{
+ cpu_maps_update_begin();
+ cpu_hotplug_disabled = 0;
+ cpu_maps_update_done();
+}
+
+/*
+ * When callbacks for CPU hotplug notifications are being executed, we must
+ * ensure that the state of the system with respect to the tasks being frozen
+ * or not, as reported by the notification, remains unchanged *throughout the
+ * duration* of the execution of the callbacks.
+ * Hence we need to prevent the freezer from racing with regular CPU hotplug.
+ *
+ * This synchronization is implemented by mutually excluding regular CPU
+ * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/
+ * Hibernate notifications.
+ */
+static int
+cpu_hotplug_pm_callback(struct notifier_block *nb,
+ unsigned long action, void *ptr)
+{
+ switch (action) {
+
+ case PM_SUSPEND_PREPARE:
+ case PM_HIBERNATION_PREPARE:
+ cpu_hotplug_disable_before_freeze();
+ break;
+
+ case PM_POST_SUSPEND:
+ case PM_POST_HIBERNATION:
+ cpu_hotplug_enable_after_thaw();
+ break;
+
+ default:
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
+
+int cpu_hotplug_pm_sync_init(void)
+{
+ pm_notifier(cpu_hotplug_pm_callback, 0);
+ return 0;
+}
+core_initcall(cpu_hotplug_pm_sync_init);
+
#endif /* CONFIG_PM_SLEEP_SMP */
/**
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index d577199..e0d42db 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -875,6 +875,8 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
* to be intended in a v3 query.
*/
max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE);
+ if (!max_delay)
+ max_delay = 1; /* can't mod w/ 0 */
} else { /* v3 */
if (!pskb_may_pull(skb, sizeof(struct igmpv3_query)))
return;
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index 6c164dc..bf54c48 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -1582,6 +1582,8 @@ process_symbols(struct event *event, struct print_arg *arg, char **tok)
field = malloc_or_die(sizeof(*field));
type = process_arg(event, field, &token);
+ while (type == EVENT_OP)
+ type = process_op(event, field, &token);
if (test_type_token(type, token, EVENT_DELIM, ","))
goto out_free;
prev parent reply other threads:[~2012-01-12 20:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-12 20:21 Linux 3.0.17 Greg KH
2012-01-12 20:21 ` Greg KH [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120112202149.GB15607@kroah.com \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.