[PATCH] ARM: clock-mx28: Fix end of loop condition

[marek.vasut@gmail.com (Marek Vasut)]

> From: Fabio Estevam <festevam@gmail.com>
> 
> Selecting audio on a mx28evk the saif driver was failing:
> 
> [    0.660000] saif0_clk_set_rate: divider writing timeout
> [    0.670000] mxs-sgtl5000: probe of mxs-sgtl5000.0 failed with error -110
> [    0.670000] ALSA device list:
> [    0.680000]   No soundcards found.
> 
> The timeout on saif0_clk_set_rate was due to the wrong condition for the
> end of loop.
> 
> After fixing it, the audio driver can be correctly probed and becomes
> functional.
> 
> While at it, fix the other locations where the similar issue occurs.

What? The patch doesn't make sense.

> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  arch/arm/mach-mxs/clock-mx28.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/clock-mx28.c
> b/arch/arm/mach-mxs/clock-mx28.c index 5d68e41..ee9e04b 100644
> --- a/arch/arm/mach-mxs/clock-mx28.c
> +++ b/arch/arm/mach-mxs/clock-mx28.c
> @@ -396,7 +396,7 @@ static int name##_set_rate(struct clk *clk, unsigned
> long rate)		\ }								
\
>  	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
>  									\
> -	for (i = 10000; i; i--)						\
> +	for (i = 10000; i < 0; i--)					\
>  		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
>  			HW_CLKCTRL_##dr) & bm_busy))			\
>  			break;						\
> @@ -439,7 +439,7 @@ static int name##_set_rate(struct clk *clk, unsigned
> long rate)		\ }								
\
>  	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
>  									\
> -	for (i = 10000; i; i--)						\
> +	for (i = 10000; i < 0; i--)					\
>  		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
>  			HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY))	\
>  			break;						\
> @@ -479,7 +479,7 @@ static int name##_set_rate(struct clk *clk, unsigned
> long rate)		\ reg |= div << BP_CLKCTRL_##rs##_DIV;				
\
>  	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
>  									\
> -	for (i = 10000; i; i--)						\
> +	for (i = 10000; i < 0; i--)					\
>  		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
>  			HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY))	\
>  			break;						\
> @@ -756,7 +756,7 @@ static int clk_misc_init(void)
>  	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
>  	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
> 
> -	for (i = 10000; i; i--)
> +	for (i = 10000; i < 0; i--)
>  		if (!(__raw_readl(CLKCTRL_BASE_ADDR +
>  			HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY))
>  			break;