From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Vetter Subject: Re: [Intel-gfx] [PATCH] drm/i915: set AUD_CONFIG N_value_index for DisplayPort Date: Tue, 17 Jan 2012 11:22:03 +0100 Message-ID: <20120117102203.GC4093@phenom.ffwll.local> References: <20120109131717.GA4713@localhost> <86y5tgx02g.fsf@sumi.keithp.com> <20120110054519.GA27257@localhost> <86ty404yhd.fsf@sumi.keithp.com> <20120116080252.GA18538@localhost> <20120116202618.GG3627@phenom.ffwll.local> <86obu31io4.fsf@sumi.keithp.com> <20120116230809.GA7837@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20120116230809.GA7837@localhost> Sender: linux-kernel-owner@vger.kernel.org To: Wu Fengguang Cc: Keith Packard , Daniel Vetter , Takashi Iwai , "intel-gfx@lists.freedesktop..." , Michal Marek , LKML , Robert Lemaire List-Id: intel-gfx@lists.freedesktop.org On Tue, Jan 17, 2012 at 07:08:09AM +0800, Wu Fengguang wrote: > On Mon, Jan 16, 2012 at 12:44:43PM -0800, Keith Packard wrote: > > On Mon, 16 Jan 2012 21:26:18 +0100, Daniel Vetter wrote: > > > > > Keith, does this address your concern and this patch is r-b: Keith or do > > > we want an > > > > > > } else { > > > I915_WRITE(aud_config, 0); > > > } > > > > > > for paranoia? > > > > I think we want this added, just to be sure we set the configuration > > correctly in all cases; it's easy to imagine moving from DP to HDMI and > > leaving this bit set. > > Ah good point! Here is the updated patch. > > --- > Subject: drm/i915: set AUD_CONFIG N_value_index for DisplayPort > Date: Fri Jan 06 14:41:31 CST 2012 > > It should be programmed to "0" for HDMI or "1" for DisplayPort. > > This enables DisplayPort audio for > > - HP EliteBook 8460p > (whose BIOS does not set the N_value_index bit for us) > > - DisplayPort monitor hot plugged after boot > (otherwise most BIOS will fill the N_value_index bit for us) > > Tested-by: Robert Lemaire > Signed-off-by: Wu Fengguang I've tried to apply this patch but it has a conflict in i915_reg.h (with the SOL reset stuff). Care to rebase and resend? Also, git patches as produced by git format-patch highly preferred. Thanks, Daniel -- Daniel Vetter Mail: daniel@ffwll.ch Mobile: +41 (0)79 365 57 48