All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jean Delvare <khali@linux-fr.org>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH 1/3] hwmon: (lm63) Reorganize the code
Date: Thu, 26 Jan 2012 20:53:45 +0000	[thread overview]
Message-ID: <20120126215345.3eb84ccd@endymion.delvare> (raw)

Reorder functions and driver declaration to no longer need to
forward-declare functions. Also rename new_client to just client
everywhere for readability.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lm63.c |  393 +++++++++++++++++++++++---------------------------
 1 file changed, 187 insertions(+), 206 deletions(-)

--- linux-3.3-rc1.orig/drivers/hwmon/lm63.c	2012-01-20 14:06:38.000000000 +0100
+++ linux-3.3-rc1/drivers/hwmon/lm63.c	2012-01-26 15:48:42.285145256 +0100
@@ -148,46 +148,9 @@ static const unsigned short normal_i2c[]
 #define UPDATE_INTERVAL(max, rate) \
 			((1000 << (LM63_MAX_CONVRATE - (rate))) / (max))
 
-/*
- * Functions declaration
- */
-
-static int lm63_probe(struct i2c_client *client,
-		      const struct i2c_device_id *id);
-static int lm63_remove(struct i2c_client *client);
-
-static struct lm63_data *lm63_update_device(struct device *dev);
-
-static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info);
-static void lm63_init_client(struct i2c_client *client);
-
 enum chips { lm63, lm64, lm96163 };
 
 /*
- * Driver data (common to all clients)
- */
-
-static const struct i2c_device_id lm63_id[] = {
-	{ "lm63", lm63 },
-	{ "lm64", lm64 },
-	{ "lm96163", lm96163 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, lm63_id);
-
-static struct i2c_driver lm63_driver = {
-	.class		= I2C_CLASS_HWMON,
-	.driver = {
-		.name	= "lm63",
-	},
-	.probe		= lm63_probe,
-	.remove		= lm63_remove,
-	.id_table	= lm63_id,
-	.detect		= lm63_detect,
-	.address_list	= normal_i2c,
-};
-
-/*
  * Client data (each client gets its own)
  */
 
@@ -242,6 +205,99 @@ static inline int lut_temp_from_reg(stru
 	return data->temp8[nr] * (data->lut_temp_highres ? 500 : 1000);
 }
 
+static struct lm63_data *lm63_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm63_data *data = i2c_get_clientdata(client);
+	unsigned long next_update;
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	next_update = data->last_updated
+	  + msecs_to_jiffies(data->update_interval) + 1;
+
+	if (time_after(jiffies, next_update) || !data->valid) {
+		if (data->config & 0x04) { /* tachometer enabled  */
+			/* order matters for fan1_input */
+			data->fan[0] = i2c_smbus_read_byte_data(client,
+				       LM63_REG_TACH_COUNT_LSB) & 0xFC;
+			data->fan[0] |= i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_COUNT_MSB) << 8;
+			data->fan[1] = (i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_LIMIT_LSB) & 0xFC)
+				     | (i2c_smbus_read_byte_data(client,
+					LM63_REG_TACH_LIMIT_MSB) << 8);
+		}
+
+		data->pwm1_freq = i2c_smbus_read_byte_data(client,
+				  LM63_REG_PWM_FREQ);
+		if (data->pwm1_freq = 0)
+			data->pwm1_freq = 1;
+		data->pwm1[0] = i2c_smbus_read_byte_data(client,
+				LM63_REG_PWM_VALUE);
+
+		data->temp8[0] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_LOCAL_TEMP);
+		data->temp8[1] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_LOCAL_HIGH);
+
+		/* order matters for temp2_input */
+		data->temp11[0] = i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_TEMP_MSB) << 8;
+		data->temp11[0] |= i2c_smbus_read_byte_data(client,
+				   LM63_REG_REMOTE_TEMP_LSB);
+		data->temp11[1] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_LOW_LSB);
+		data->temp11[2] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_HIGH_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_HIGH_LSB);
+		data->temp11[3] = (i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_OFFSET_MSB) << 8)
+				| i2c_smbus_read_byte_data(client,
+				  LM63_REG_REMOTE_OFFSET_LSB);
+
+		if (data->kind = lm96163)
+			data->temp11u = (i2c_smbus_read_byte_data(client,
+					LM96163_REG_REMOTE_TEMP_U_MSB) << 8)
+				      | i2c_smbus_read_byte_data(client,
+					LM96163_REG_REMOTE_TEMP_U_LSB);
+
+		data->temp8[2] = i2c_smbus_read_byte_data(client,
+				 LM63_REG_REMOTE_TCRIT);
+		data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
+					LM63_REG_REMOTE_TCRIT_HYST);
+
+		data->alarms = i2c_smbus_read_byte_data(client,
+			       LM63_REG_ALERT_STATUS) & 0x7F;
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
+	    !data->lut_valid) {
+		for (i = 0; i < data->lut_size; i++) {
+			data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
+					    LM63_REG_LUT_PWM(i));
+			data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
+					     LM63_REG_LUT_TEMP(i));
+		}
+		data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
+				      LM63_REG_LUT_TEMP_HYST);
+
+		data->lut_last_updated = jiffies;
+		data->lut_valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
 /*
  * Sysfs callback functions and files
  */
@@ -817,28 +873,25 @@ static const struct attribute_group lm63
  */
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
-static int lm63_detect(struct i2c_client *new_client,
+static int lm63_detect(struct i2c_client *client,
 		       struct i2c_board_info *info)
 {
-	struct i2c_adapter *adapter = new_client->adapter;
+	struct i2c_adapter *adapter = client->adapter;
 	u8 man_id, chip_id, reg_config1, reg_config2;
 	u8 reg_alert_status, reg_alert_mask;
-	int address = new_client->addr;
+	int address = client->addr;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID);
-	chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID);
+	man_id = i2c_smbus_read_byte_data(client, LM63_REG_MAN_ID);
+	chip_id = i2c_smbus_read_byte_data(client, LM63_REG_CHIP_ID);
 
-	reg_config1 = i2c_smbus_read_byte_data(new_client,
-		      LM63_REG_CONFIG1);
-	reg_config2 = i2c_smbus_read_byte_data(new_client,
-		      LM63_REG_CONFIG2);
-	reg_alert_status = i2c_smbus_read_byte_data(new_client,
+	reg_config1 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1);
+	reg_config2 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG2);
+	reg_alert_status = i2c_smbus_read_byte_data(client,
 			   LM63_REG_ALERT_STATUS);
-	reg_alert_mask = i2c_smbus_read_byte_data(new_client,
-			 LM63_REG_ALERT_MASK);
+	reg_alert_mask = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_MASK);
 
 	if (man_id != 0x01 /* National Semiconductor */
 	 || (reg_config1 & 0x18) != 0x00
@@ -863,74 +916,6 @@ static int lm63_detect(struct i2c_client
 	return 0;
 }
 
-static int lm63_probe(struct i2c_client *new_client,
-		      const struct i2c_device_id *id)
-{
-	struct lm63_data *data;
-	int err;
-
-	data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
-	if (!data) {
-		err = -ENOMEM;
-		goto exit;
-	}
-
-	i2c_set_clientdata(new_client, data);
-	data->valid = 0;
-	mutex_init(&data->update_lock);
-
-	/* Set the device type */
-	data->kind = id->driver_data;
-	if (data->kind = lm64)
-		data->temp2_offset = 16000;
-
-	/* Initialize chip */
-	lm63_init_client(new_client);
-
-	/* Register sysfs hooks */
-	err = sysfs_create_group(&new_client->dev.kobj, &lm63_group);
-	if (err)
-		goto exit_free;
-	if (data->config & 0x04) { /* tachometer enabled */
-		err = sysfs_create_group(&new_client->dev.kobj,
-					 &lm63_group_fan1);
-		if (err)
-			goto exit_remove_files;
-	}
-	if (data->kind = lm96163) {
-		err = device_create_file(&new_client->dev,
-					 &dev_attr_temp2_type);
-		if (err)
-			goto exit_remove_files;
-
-		err = sysfs_create_group(&new_client->dev.kobj,
-					 &lm63_group_extra_lut);
-		if (err)
-			goto exit_remove_files;
-	}
-
-	data->hwmon_dev = hwmon_device_register(&new_client->dev);
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove_files;
-	}
-
-	return 0;
-
-exit_remove_files:
-	sysfs_remove_group(&new_client->dev.kobj, &lm63_group);
-	sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1);
-	if (data->kind = lm96163) {
-		device_remove_file(&new_client->dev, &dev_attr_temp2_type);
-		sysfs_remove_group(&new_client->dev.kobj,
-				   &lm63_group_extra_lut);
-	}
-exit_free:
-	kfree(data);
-exit:
-	return err;
-}
-
 /*
  * Ideally we shouldn't have to initialize anything, since the BIOS
  * should have taken care of everything
@@ -1010,114 +995,110 @@ static void lm63_init_client(struct i2c_
 		(data->config_fan & 0x20) ? "manual" : "auto");
 }
 
-static int lm63_remove(struct i2c_client *client)
+static int lm63_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id)
 {
-	struct lm63_data *data = i2c_get_clientdata(client);
+	struct lm63_data *data;
+	int err;
 
-	hwmon_device_unregister(data->hwmon_dev);
+	data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	data->valid = 0;
+	mutex_init(&data->update_lock);
+
+	/* Set the device type */
+	data->kind = id->driver_data;
+	if (data->kind = lm64)
+		data->temp2_offset = 16000;
+
+	/* Initialize chip */
+	lm63_init_client(client);
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &lm63_group);
+	if (err)
+		goto exit_free;
+	if (data->config & 0x04) { /* tachometer enabled */
+		err = sysfs_create_group(&client->dev.kobj, &lm63_group_fan1);
+		if (err)
+			goto exit_remove_files;
+	}
+	if (data->kind = lm96163) {
+		err = device_create_file(&client->dev, &dev_attr_temp2_type);
+		if (err)
+			goto exit_remove_files;
+
+		err = sysfs_create_group(&client->dev.kobj,
+					 &lm63_group_extra_lut);
+		if (err)
+			goto exit_remove_files;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+exit_remove_files:
 	sysfs_remove_group(&client->dev.kobj, &lm63_group);
 	sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
 	if (data->kind = lm96163) {
 		device_remove_file(&client->dev, &dev_attr_temp2_type);
 		sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut);
 	}
-
+exit_free:
 	kfree(data);
-	return 0;
+exit:
+	return err;
 }
 
-static struct lm63_data *lm63_update_device(struct device *dev)
+static int lm63_remove(struct i2c_client *client)
 {
-	struct i2c_client *client = to_i2c_client(dev);
 	struct lm63_data *data = i2c_get_clientdata(client);
-	unsigned long next_update;
-	int i;
-
-	mutex_lock(&data->update_lock);
-
-	next_update = data->last_updated
-	  + msecs_to_jiffies(data->update_interval) + 1;
-
-	if (time_after(jiffies, next_update) || !data->valid) {
-		if (data->config & 0x04) { /* tachometer enabled  */
-			/* order matters for fan1_input */
-			data->fan[0] = i2c_smbus_read_byte_data(client,
-				       LM63_REG_TACH_COUNT_LSB) & 0xFC;
-			data->fan[0] |= i2c_smbus_read_byte_data(client,
-					LM63_REG_TACH_COUNT_MSB) << 8;
-			data->fan[1] = (i2c_smbus_read_byte_data(client,
-					LM63_REG_TACH_LIMIT_LSB) & 0xFC)
-				     | (i2c_smbus_read_byte_data(client,
-					LM63_REG_TACH_LIMIT_MSB) << 8);
-		}
-
-		data->pwm1_freq = i2c_smbus_read_byte_data(client,
-				  LM63_REG_PWM_FREQ);
-		if (data->pwm1_freq = 0)
-			data->pwm1_freq = 1;
-		data->pwm1[0] = i2c_smbus_read_byte_data(client,
-				LM63_REG_PWM_VALUE);
-
-		data->temp8[0] = i2c_smbus_read_byte_data(client,
-				 LM63_REG_LOCAL_TEMP);
-		data->temp8[1] = i2c_smbus_read_byte_data(client,
-				 LM63_REG_LOCAL_HIGH);
-
-		/* order matters for temp2_input */
-		data->temp11[0] = i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_TEMP_MSB) << 8;
-		data->temp11[0] |= i2c_smbus_read_byte_data(client,
-				   LM63_REG_REMOTE_TEMP_LSB);
-		data->temp11[1] = (i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_LOW_MSB) << 8)
-				| i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_LOW_LSB);
-		data->temp11[2] = (i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_HIGH_MSB) << 8)
-				| i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_HIGH_LSB);
-		data->temp11[3] = (i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_OFFSET_MSB) << 8)
-				| i2c_smbus_read_byte_data(client,
-				  LM63_REG_REMOTE_OFFSET_LSB);
-
-		if (data->kind = lm96163)
-			data->temp11u = (i2c_smbus_read_byte_data(client,
-					LM96163_REG_REMOTE_TEMP_U_MSB) << 8)
-				      | i2c_smbus_read_byte_data(client,
-					LM96163_REG_REMOTE_TEMP_U_LSB);
-
-		data->temp8[2] = i2c_smbus_read_byte_data(client,
-				 LM63_REG_REMOTE_TCRIT);
-		data->temp2_crit_hyst = i2c_smbus_read_byte_data(client,
-					LM63_REG_REMOTE_TCRIT_HYST);
-
-		data->alarms = i2c_smbus_read_byte_data(client,
-			       LM63_REG_ALERT_STATUS) & 0x7F;
 
-		data->last_updated = jiffies;
-		data->valid = 1;
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &lm63_group);
+	sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1);
+	if (data->kind = lm96163) {
+		device_remove_file(&client->dev, &dev_attr_temp2_type);
+		sysfs_remove_group(&client->dev.kobj, &lm63_group_extra_lut);
 	}
 
-	if (time_after(jiffies, data->lut_last_updated + 5 * HZ) ||
-	    !data->lut_valid) {
-		for (i = 0; i < data->lut_size; i++) {
-			data->pwm1[1 + i] = i2c_smbus_read_byte_data(client,
-					    LM63_REG_LUT_PWM(i));
-			data->temp8[3 + i] = i2c_smbus_read_byte_data(client,
-					     LM63_REG_LUT_TEMP(i));
-		}
-		data->lut_temp_hyst = i2c_smbus_read_byte_data(client,
-				      LM63_REG_LUT_TEMP_HYST);
+	kfree(data);
+	return 0;
+}
 
-		data->lut_last_updated = jiffies;
-		data->lut_valid = 1;
-	}
+/*
+ * Driver data (common to all clients)
+ */
 
-	mutex_unlock(&data->update_lock);
+static const struct i2c_device_id lm63_id[] = {
+	{ "lm63", lm63 },
+	{ "lm64", lm64 },
+	{ "lm96163", lm96163 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm63_id);
 
-	return data;
-}
+static struct i2c_driver lm63_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm63",
+	},
+	.probe		= lm63_probe,
+	.remove		= lm63_remove,
+	.id_table	= lm63_id,
+	.detect		= lm63_detect,
+	.address_list	= normal_i2c,
+};
 
 static int __init sensors_lm63_init(void)
 {


-- 
Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

             reply	other threads:[~2012-01-26 20:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-26 20:53 Jean Delvare [this message]
2012-01-27  3:18 ` [lm-sensors] [PATCH 1/3] hwmon: (lm63) Reorganize the code Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120126215345.3eb84ccd@endymion.delvare \
    --to=khali@linux-fr.org \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.