From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dimitri Yioulos Subject: Re: Dual WAN setup redux Date: Wed, 1 Feb 2012 11:51:30 -0500 Message-ID: <201202011151.30910.dyioulos@onpointfc.com> References: <201201271803.19071.dyioulos@onpointfc.com> <1328030100.2018.1.camel@andy-laptop> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1328030100.2018.1.camel@andy-laptop> Content-Disposition: inline Sender: netfilter-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="us-ascii" To: "netfilter@vger.kernel.org" Cc: "DiCecca, Caitlin" On Tuesday 31 January 2012 12:15:00 pm Andrew Beverley wrote: > On Fri, 2012-01-27 at 18:03 -0500, Dimitri Yioulos wrote: > > Well, here I am, again, asking for help setting up a dual WAN. > > Any chance of an ascii diagram? It's a bit difficult to understand what > you have and what you are trying to achieve without it. > > Andy > > Lloyd, Andy, and others, Let me see what I can do here: WAN2 ___________ 75.x.x.24/29, gw 75.x.x.30 | |---------eth3 (75.x.x.25) | | (eth0:0=75.x.x.26, ...) Local network | | 192.168.100.0/22 ----|fw/router| WAN1 eth1 (192.168.100.1) | | 65.x.x.160/27, gw 65.x.x.161 |__________|--------eth0 (65.x.x.162) | (eth0:0=65.x.x.163, ... ) | DMZ 192.168.1.0/24 eth1 (192.168.1.1) | | | | ___________________|_____________________ | | | | box1 box2 box3 box4 192.168.1.2 192.168.1.3 192.168.1.4 192.168.1.5 (65.x.x.163 (65.x.x.164 eth0:0) eth0:1) I'd like for boxes 3 and 4 to use WAN2. The above probably looks like an unholy mess (and it may be; a discussion for another day, though), but hope it helps clarify things. That's what I'm after. Thanks. Dimitri -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.