From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net
Subject: Re: Linux 3.2.5
Date: Mon, 6 Feb 2012 10:16:39 -0800 [thread overview]
Message-ID: <20120206181639.GB28811@kroah.com> (raw)
In-Reply-To: <20120206181622.GA28811@kroah.com>
diff --git a/Makefile b/Makefile
index c8e187e..e9dd0ff 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 2
-SUBLEVEL = 4
+SUBLEVEL = 5
EXTRAVERSION =
NAME = Saber-toothed Squirrel
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 2672c79..7aff631 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -596,6 +596,13 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
if (ACPI_SUCCESS(status)) {
dev_info(root->bus->bridge,
"ACPI _OSC control (0x%02x) granted\n", flags);
+ if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
+ /*
+ * We have ASPM control, but the FADT indicates
+ * that it's unsupported. Clear it.
+ */
+ pcie_clear_aspm(root->bus);
+ }
} else {
dev_info(root->bus->bridge,
"ACPI _OSC request failed (%s), "
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 4ecb640..c8e7585 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -395,7 +395,6 @@ static int __init acpi_pci_init(void)
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) {
printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
- pcie_clear_aspm();
pcie_no_aspm();
}
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index cbfbab1..1cfbf22 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -68,7 +68,7 @@ struct pcie_link_state {
struct aspm_latency acceptable[8];
};
-static int aspm_disabled, aspm_force, aspm_clear_state;
+static int aspm_disabled, aspm_force;
static bool aspm_support_enabled = true;
static DEFINE_MUTEX(aspm_lock);
static LIST_HEAD(link_list);
@@ -500,9 +500,6 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
int pos;
u32 reg32;
- if (aspm_clear_state)
- return -EINVAL;
-
/*
* Some functions in a slot might not all be PCIe functions,
* very strange. Disable ASPM for the whole slot
@@ -574,9 +571,6 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
return;
- if (aspm_disabled && !aspm_clear_state)
- return;
-
/* VIA has a strange chipset, root port is under a bridge */
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT &&
pdev->bus->self)
@@ -608,7 +602,7 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
* the BIOS's expectation, we'll do so once pci_enable_device() is
* called.
*/
- if (aspm_policy != POLICY_POWERSAVE || aspm_clear_state) {
+ if (aspm_policy != POLICY_POWERSAVE) {
pcie_config_aspm_path(link);
pcie_set_clkpm(link, policy_to_clkpm_state(link));
}
@@ -649,8 +643,7 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
struct pci_dev *parent = pdev->bus->self;
struct pcie_link_state *link, *root, *parent_link;
- if ((aspm_disabled && !aspm_clear_state) || !pci_is_pcie(pdev) ||
- !parent || !parent->link_state)
+ if (!pci_is_pcie(pdev) || !parent || !parent->link_state)
return;
if ((parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
(parent->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
@@ -734,13 +727,18 @@ void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
* pci_disable_link_state - disable pci device's link state, so the link will
* never enter specific states
*/
-static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
+static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem,
+ bool force)
{
struct pci_dev *parent = pdev->bus->self;
struct pcie_link_state *link;
- if (aspm_disabled || !pci_is_pcie(pdev))
+ if (aspm_disabled && !force)
+ return;
+
+ if (!pci_is_pcie(pdev))
return;
+
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
parent = pdev;
@@ -768,16 +766,31 @@ static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
void pci_disable_link_state_locked(struct pci_dev *pdev, int state)
{
- __pci_disable_link_state(pdev, state, false);
+ __pci_disable_link_state(pdev, state, false, false);
}
EXPORT_SYMBOL(pci_disable_link_state_locked);
void pci_disable_link_state(struct pci_dev *pdev, int state)
{
- __pci_disable_link_state(pdev, state, true);
+ __pci_disable_link_state(pdev, state, true, false);
}
EXPORT_SYMBOL(pci_disable_link_state);
+void pcie_clear_aspm(struct pci_bus *bus)
+{
+ struct pci_dev *child;
+
+ /*
+ * Clear any ASPM setup that the firmware has carried out on this bus
+ */
+ list_for_each_entry(child, &bus->devices, bus_list) {
+ __pci_disable_link_state(child, PCIE_LINK_STATE_L0S |
+ PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM,
+ false, true);
+ }
+}
+
static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
{
int i;
@@ -935,6 +948,7 @@ void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
static int __init pcie_aspm_disable(char *str)
{
if (!strcmp(str, "off")) {
+ aspm_policy = POLICY_DEFAULT;
aspm_disabled = 1;
aspm_support_enabled = false;
printk(KERN_INFO "PCIe ASPM is disabled\n");
@@ -947,16 +961,18 @@ static int __init pcie_aspm_disable(char *str)
__setup("pcie_aspm=", pcie_aspm_disable);
-void pcie_clear_aspm(void)
-{
- if (!aspm_force)
- aspm_clear_state = 1;
-}
-
void pcie_no_aspm(void)
{
- if (!aspm_force)
+ /*
+ * Disabling ASPM is intended to prevent the kernel from modifying
+ * existing hardware state, not to clear existing state. To that end:
+ * (a) set policy to POLICY_DEFAULT in order to avoid changing state
+ * (b) prevent userspace from changing policy
+ */
+ if (!aspm_force) {
+ aspm_policy = POLICY_DEFAULT;
aspm_disabled = 1;
+ }
}
/**
diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h
index 7cea7b6..c832014 100644
--- a/include/linux/pci-aspm.h
+++ b/include/linux/pci-aspm.h
@@ -29,7 +29,7 @@ extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
extern void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
extern void pci_disable_link_state(struct pci_dev *pdev, int state);
extern void pci_disable_link_state_locked(struct pci_dev *pdev, int state);
-extern void pcie_clear_aspm(void);
+extern void pcie_clear_aspm(struct pci_bus *bus);
extern void pcie_no_aspm(void);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev)
@@ -47,7 +47,7 @@ static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
static inline void pci_disable_link_state(struct pci_dev *pdev, int state)
{
}
-static inline void pcie_clear_aspm(void)
+static inline void pcie_clear_aspm(struct pci_bus *bus)
{
}
static inline void pcie_no_aspm(void)
next prev parent reply other threads:[~2012-02-06 18:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-06 18:16 Linux 3.2.5 Greg KH
2012-02-06 18:16 ` Greg KH [this message]
2012-02-07 8:40 ` Matthias Schniedermeyer
2012-02-07 10:19 ` Clemens Ladisch
2012-02-07 10:58 ` Matthias Schniedermeyer
2012-02-07 11:23 ` Matthias Schniedermeyer
2012-02-07 11:40 ` Clemens Ladisch
2012-02-07 11:48 ` Matthias Schniedermeyer
2012-02-07 12:28 ` Clemens Ladisch
2012-02-07 14:52 ` Matthias Schniedermeyer
2012-02-07 18:29 ` Matthias Schniedermeyer
2012-02-07 16:29 ` Linus Torvalds
2012-02-07 16:40 ` Matthew Garrett
2012-02-07 16:54 ` Matthias Schniedermeyer
2012-02-07 16:59 ` Matthew Garrett
2012-02-07 17:07 ` Matthias Schniedermeyer
2012-02-07 17:18 ` Matthew Garrett
2012-02-28 0:13 ` Greg KH
2012-02-28 0:19 ` Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120206181639.GB28811@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.