All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v3-resend 1/2] usb_modeswitch: update to 1.2.3
Date: Tue, 14 Feb 2012 07:47:07 +0100	[thread overview]
Message-ID: <201202140747.07791.arnout@mind.be> (raw)
In-Reply-To: <CAC78GpfYU7HLUP3QnvbLboh91e4YkLs2JBc7Thf+WC=6y+9ELw@mail.gmail.com>

On Monday 13 February 2012 03:57:05 J.C. Woltz wrote:
> > - .patch files should have a comment at the top explaining why it is needed,
> > and a Signed-off-by line.  Also, try to send the patch upstream, so we
> > don't need to carry it forward forever.
> 
> What do you mean by this? Buildroot already had a patch for
> usb_modeswitch. 
 Indeed, and this patch didn't have a Signed-off-by.  That's why this
remarks is for the next time you write a patch.
> - .patch files should have a comment at the top explaining why it is needed,
> and a Signed-off-by line.  Also, try to send the patch upstream, so we
> don't need to carry it forward forever.

What do you mean by this? Buildroot already had a patch for
usb_modeswitch. The only thing my patch did to the makefile was remove
the -s flag from two install commands. On a normal system, the -s on
the install makes sense. In a buildroot environment where the software
is not installed directly, this patch was needed. If you still believe
that an upstream patch is needed, then I can do that.
 BTW the new patch file doesn't reuse any change from the old patch file,
so if there would have been and S-o-b in the original patch file, you
wouldn't have had to keep it.

> The only thing my patch did to the makefile was remove
> the -s flag from two install commands. On a normal system, the -s on
> the install makes sense. In a buildroot environment where the software
> is not installed directly, this patch was needed. If you still believe
> that an upstream patch is needed, then I can do that.

 But since install -s makes cross-compilation more difficult, it shouldn't
be used by anyone :-).  The Makefile should at least replace it with
something configurable, e.g. $(STRIP) (which we can define to ":", because
we strip everything in the target directory but only if it was requested).

 Regards,
 Arnout


-- 
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

      reply	other threads:[~2012-02-14  6:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-12 19:09 [Buildroot] [PATCH v3-resend 1/2] usb_modeswitch: update to 1.2.3 J.C. Woltz
2012-02-12 19:09 ` [Buildroot] [PATCH v3-resend 2/2] new program: usb_modeswitch_data J.C. Woltz
2012-02-12 22:29   ` Arnout Vandecappelle
2012-02-13  3:00     ` J.C. Woltz
2012-02-13  8:03     ` Thomas De Schampheleire
2012-02-13 16:59       ` J.C. Woltz
2012-02-14 23:46         ` Arnout Vandecappelle
2012-02-14 23:48           ` [Buildroot] [PATCH] tcl: replace option to install library only with positive option to install tclsh Arnout Vandecappelle
2012-02-16  0:09             ` J.C. Woltz
2012-07-15 21:37             ` Thomas Petazzoni
2012-07-25 17:01               ` Arnout Vandecappelle
2012-02-13 21:40       ` [Buildroot] [PATCH v3-resend 2/2] new program: usb_modeswitch_data Arnout Vandecappelle
2012-02-14  9:22         ` Thomas De Schampheleire
2012-02-14 17:30           ` Arnout Vandecappelle
2012-02-12 19:19 ` [Buildroot] [PATCH v3-resend 1/2] usb_modeswitch: update to 1.2.3 J.C. Woltz
2012-02-12 22:21 ` Arnout Vandecappelle
2012-02-13  2:57   ` J.C. Woltz
2012-02-14  6:47     ` Arnout Vandecappelle [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201202140747.07791.arnout@mind.be \
    --to=arnout@mind.be \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.