From: "Eric Bénard" <eric@eukrea.com>
To: George Stefan <stefan.george87@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: mx53 loco boot procedure
Date: Tue, 21 Feb 2012 21:02:05 +0100 [thread overview]
Message-ID: <20120221210205.0733d834@eb-e6520> (raw)
In-Reply-To: <CAACwSTKshGv05PfJWJkFTKzhof2q+hjupdh=U3VH2Fbdc-6VBQ@mail.gmail.com>
Hi George,
Le Tue, 21 Feb 2012 20:38:24 +0200,
George Stefan <stefan.george87@gmail.com> a écrit :
> Hello guys,
> After dd if=barebox.bin of=/dev/sdb bs=512 and dd if=arch/arm/boot/uImage
> of=/dev/sdb bs=512 seek=768 i am getting
>
> Board: Freescale i.MX53 LOCO registered netconsole as cs1 eth@eth0: got MAC
> address from EEPROM: 00:04:9F:01:B4:5B mci@mci0: No partition table found
> Cannot reset the SD/MMC interface Malloc space: 0x7df00000 -> 0x7fefffff
> (size 32 MB) Stack space : 0x7def8000 -> 0x7df00000 (size 32 kB) envfs:
> wrong magic on /dev/env0 no valid environment found on /dev/env0. Using
> default environment running /env/bin/init... Hit any key to stop autoboot:
> 1 phy0: Link is up - 100/Full T DHCP client bound to address
> 128.224.168.167 TFTP from server 128.224.168.11 ('zImage-loco' -> '/image')
>
> Wasn't the board suppose to boot from sd card by default?
>
it will if you configure it correctly (ie: check env/config and put
the right settings inside to tell it to get the kernel from disk
instead of tftp).
Eric
--
http://eukrea.com/en/news/104-2012
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2012-02-21 20:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-21 18:38 mx53 loco boot procedure George Stefan
2012-02-21 20:02 ` Eric Bénard [this message]
2012-02-21 21:01 ` Sascha Hauer
2012-02-22 9:22 ` George Stefan
2012-02-23 20:13 ` Sascha Hauer
2012-02-23 20:40 ` George Stefan
2012-02-23 20:59 ` Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120221210205.0733d834@eb-e6520 \
--to=eric@eukrea.com \
--cc=barebox@lists.infradead.org \
--cc=stefan.george87@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.