All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hu Tao <hutao@cn.fujitsu.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v4 14/18] virtio-scsi: process control queue requests
Date: Fri, 24 Feb 2012 15:54:37 +0800	[thread overview]
Message-ID: <20120224075437.GA6937@localhost.localdomain> (raw)
In-Reply-To: <1329921236-23461-15-git-send-email-pbonzini@redhat.com>

On Wed, Feb 22, 2012 at 03:33:52PM +0100, Paolo Bonzini wrote:
> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
>  hw/virtio-scsi.c |  134 ++++++++++++++++++++++++++++++++++++++++++++++++++---
>  1 files changed, 126 insertions(+), 8 deletions(-)
> 
> diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
> index f4eb8c7..380073a 100644
> --- a/hw/virtio-scsi.c
> +++ b/hw/virtio-scsi.c
> @@ -134,6 +134,7 @@ typedef struct {
>      VirtQueue *cmd_vq;
>      uint32_t sense_size;
>      uint32_t cdb_size;
> +    int resetting;
>  } VirtIOSCSI;
>  
>  typedef struct VirtIOSCSIReq {
> @@ -236,15 +237,104 @@ static VirtIOSCSIReq *virtio_scsi_pop_req(VirtIOSCSI *s, VirtQueue *vq)
>      return req;
>  }
>  
> -static void virtio_scsi_fail_ctrl_req(VirtIOSCSIReq *req)
> +static void virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
>  {
> -    if (req->req.tmf->type == VIRTIO_SCSI_T_TMF) {
> -        req->resp.tmf->response = VIRTIO_SCSI_S_FAILURE;
> -    } else {
> -        req->resp.an->response = VIRTIO_SCSI_S_FAILURE;
> +    SCSIDevice *d = virtio_scsi_device_find(s, req->req.cmd->lun);

should be req->req.tmf->lun here and elsewhere in this function?

diff --git a/hw/virtio-scsi.c b/hw/virtio-scsi.c
index 380073a..1f3b851 100644
--- a/hw/virtio-scsi.c
+++ b/hw/virtio-scsi.c
@@ -239,7 +239,7 @@ static VirtIOSCSIReq *virtio_scsi_pop_req(VirtIOSCSI *s, VirtQueue *vq)
 
 static void virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
 {
-    SCSIDevice *d = virtio_scsi_device_find(s, req->req.cmd->lun);
+    SCSIDevice *d = virtio_scsi_device_find(s, req->req.tmf->lun);
     SCSIRequest *r, *next;
     DeviceState *qdev;
     int target;
@@ -253,11 +253,11 @@ static void virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
         if (!d) {
             goto fail;
         }
-        if (d->lun != virtio_scsi_get_lun(req->req.cmd->lun)) {
+        if (d->lun != virtio_scsi_get_lun(req->req.tmf->lun)) {
             goto incorrect_lun;
         }
         QTAILQ_FOREACH_SAFE(r, &d->requests, next, next) {
-            if (r->tag == req->req.cmd->tag) {
+            if (r->tag == req->req.tmf->tag) {
                 break;
             }
         }
@@ -277,7 +277,7 @@ static void virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
         if (!d) {
             goto fail;
         }
-        if (d->lun != virtio_scsi_get_lun(req->req.cmd->lun)) {
+        if (d->lun != virtio_scsi_get_lun(req->req.tmf->lun)) {
             goto incorrect_lun;
         }
         s->resetting++;
@@ -291,7 +291,7 @@ static void virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
         if (!d) {
             goto fail;
         }
-        if (d->lun != virtio_scsi_get_lun(req->req.cmd->lun)) {
+        if (d->lun != virtio_scsi_get_lun(req->req.tmf->lun)) {
             goto incorrect_lun;
         }
         QTAILQ_FOREACH_SAFE(r, &d->requests, next, next) {
@@ -310,7 +310,7 @@ static void virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
         break;
 
     case VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET:
-        target = req->req.cmd->lun[1];
+        target = req->req.tmf->lun[1];
         s->resetting++;
         QTAILQ_FOREACH(qdev, &s->bus.qbus.children, sibling) {
              d = DO_UPCAST(SCSIDevice, qdev, qdev);

-- 
Thanks,
Hu Tao

  reply	other threads:[~2012-02-24  7:54 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-22 14:33 [Qemu-devel] [PULL v4 00/18] virtio-scsi driver Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 01/18] dma-helpers: make QEMUSGList target independent Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 02/18] dma-helpers: add dma_buf_read and dma_buf_write Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 03/18] dma-helpers: add accounting wrappers Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 04/18] ahci: use new DMA helpers Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 05/18] scsi: pass residual amount to command_complete Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 06/18] scsi: add scatter/gather functionality Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 07/18] scsi-disk: enable " Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 08/18] scsi: add SCSIDevice vmstate definitions Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 09/18] scsi-generic: add migration support Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 10/18] scsi-disk: " Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 11/18] virtio-scsi: Add virtio-scsi stub device Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 12/18] virtio-scsi: Add basic request processing infrastructure Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 13/18] virtio-scsi: add basic SCSI bus operation Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 14/18] virtio-scsi: process control queue requests Paolo Bonzini
2012-02-24  7:54   ` Hu Tao [this message]
2012-02-24  8:56     ` Paolo Bonzini
2012-02-24 13:58     ` Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 15/18] virtio-scsi: add migration support Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 16/18] scsi: fix wrong return for target INQUIRY Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 17/18] scsi: fix searching for an empty id Paolo Bonzini
2012-02-22 14:33 ` [Qemu-devel] [PATCH v4 18/18] scsi-block: always use scsi_generic_ops for cache != none Paolo Bonzini
2012-02-24 16:34 ` [Qemu-devel] [PULL v4 00/18] virtio-scsi driver Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120224075437.GA6937@localhost.localdomain \
    --to=hutao@cn.fujitsu.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.