All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ondrej Zary <linux@rainbow-software.org>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-media@vger.kernel.org
Subject: [RFC PATCH] PnP support for the new ISA radio framework
Date: Tue, 28 Feb 2012 22:08:35 +0100	[thread overview]
Message-ID: <201202282208.39343.linux@rainbow-software.org> (raw)
In-Reply-To: <201202241035.13232.hverkuil@xs4all.nl>

Hello,
this is the first attempt to add PnP support to the new ISA radio framework.
I don't like the region_size function parameter - it's needed because PnP
reports longer port range than drv->region_size.

There is a small patch to radio-gemtek at the end that uses this PnP support
for AOpen FX-3D/Pro Radio card (it works).


diff --git a/drivers/media/radio/radio-isa.c b/drivers/media/radio/radio-isa.c
index 02bcead..8722728 100644
--- a/drivers/media/radio/radio-isa.c
+++ b/drivers/media/radio/radio-isa.c
@@ -26,6 +26,7 @@
 #include <linux/delay.h>
 #include <linux/videodev2.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-fh.h>
@@ -198,56 +199,31 @@ static bool radio_isa_valid_io(const struct radio_isa_driver *drv, int io)
 	return false;
 }
 
-int radio_isa_probe(struct device *pdev, unsigned int dev)
+struct radio_isa_card *radio_isa_alloc(struct radio_isa_driver *drv,
+				struct device *pdev)
 {
-	struct radio_isa_driver *drv = pdev->platform_data;
-	const struct radio_isa_ops *ops = drv->ops;
 	struct v4l2_device *v4l2_dev;
-	struct radio_isa_card *isa;
-	int res;
+	struct radio_isa_card *isa = drv->ops->alloc();
+	if (!isa)
+		return NULL;
 
-	isa = drv->ops->alloc();
-	if (isa == NULL)
-		return -ENOMEM;
 	dev_set_drvdata(pdev, isa);
 	isa->drv = drv;
-	isa->io = drv->io_params[dev];
 	v4l2_dev = &isa->v4l2_dev;
 	strlcpy(v4l2_dev->name, dev_name(pdev), sizeof(v4l2_dev->name));
 
-	if (drv->probe && ops->probe) {
-		int i;
-
-		for (i = 0; i < drv->num_of_io_ports; ++i) {
-			int io = drv->io_ports[i];
-
-			if (request_region(io, drv->region_size, v4l2_dev->name)) {
-				bool found = ops->probe(isa, io);
-
-				release_region(io, drv->region_size);
-				if (found) {
-					isa->io = io;
-					break;
-				}
-			}
-		}
-	}
-
-	if (!radio_isa_valid_io(drv, isa->io)) {
-		int i;
+	return isa;
+}
 
-		if (isa->io < 0)
-			return -ENODEV;
-		v4l2_err(v4l2_dev, "you must set an I/O address with io=0x%03x",
-				drv->io_ports[0]);
-		for (i = 1; i < drv->num_of_io_ports; i++)
-			printk(KERN_CONT "/0x%03x", drv->io_ports[i]);
-		printk(KERN_CONT ".\n");
-		kfree(isa);
-		return -EINVAL;
-	}
+int radio_isa_common_probe(struct radio_isa_card *isa, struct device *pdev,
+				int radio_nr, unsigned region_size)
+{
+	const struct radio_isa_driver *drv = isa->drv;
+	const struct radio_isa_ops *ops = drv->ops;
+	struct v4l2_device *v4l2_dev = &isa->v4l2_dev;
+	int res;
 
-	if (!request_region(isa->io, drv->region_size, v4l2_dev->name)) {
+	if (!request_region(isa->io, region_size, v4l2_dev->name)) {
 		v4l2_err(v4l2_dev, "port 0x%x already in use\n", isa->io);
 		kfree(isa);
 		return -EBUSY;
@@ -300,8 +276,8 @@ int radio_isa_probe(struct device *pdev, unsigned int dev)
 		v4l2_err(v4l2_dev, "Could not setup card\n");
 		goto err_node_reg;
 	}
-	res = video_register_device(&isa->vdev, VFL_TYPE_RADIO,
-					drv->radio_nr_params[dev]);
+	res = video_register_device(&isa->vdev, VFL_TYPE_RADIO, radio_nr);
+
 	if (res < 0) {
 		v4l2_err(v4l2_dev, "Could not register device node\n");
 		goto err_node_reg;
@@ -316,24 +292,107 @@ err_node_reg:
 err_hdl:
 	v4l2_device_unregister(&isa->v4l2_dev);
 err_dev_reg:
-	release_region(isa->io, drv->region_size);
+	release_region(isa->io, region_size);
 	kfree(isa);
 	return res;
 }
+
+int radio_isa_probe(struct device *pdev, unsigned int dev)
+{
+	struct radio_isa_driver *drv = pdev->platform_data;
+	const struct radio_isa_ops *ops = drv->ops;
+	struct v4l2_device *v4l2_dev;
+	struct radio_isa_card *isa;
+
+	isa = radio_isa_alloc(drv, pdev);
+	if (!isa)
+		return -ENOMEM;
+	isa->io = drv->io_params[dev];
+	v4l2_dev = &isa->v4l2_dev;
+
+	if (drv->probe && ops->probe) {
+		int i;
+
+		for (i = 0; i < drv->num_of_io_ports; ++i) {
+			int io = drv->io_ports[i];
+
+			if (request_region(io, drv->region_size, v4l2_dev->name)) {
+				bool found = ops->probe(isa, io);
+
+				release_region(io, drv->region_size);
+				if (found) {
+					isa->io = io;
+					break;
+				}
+			}
+		}
+	}
+
+	if (!radio_isa_valid_io(drv, isa->io)) {
+		int i;
+
+		if (isa->io < 0)
+			return -ENODEV;
+		v4l2_err(v4l2_dev, "you must set an I/O address with io=0x%03x",
+				drv->io_ports[0]);
+		for (i = 1; i < drv->num_of_io_ports; i++)
+			printk(KERN_CONT "/0x%03x", drv->io_ports[i]);
+		printk(KERN_CONT ".\n");
+		kfree(isa);
+		return -EINVAL;
+	}
+
+	return radio_isa_common_probe(isa, pdev, drv->radio_nr_params[dev],
+					drv->region_size);
+}
 EXPORT_SYMBOL_GPL(radio_isa_probe);
 
-int radio_isa_remove(struct device *pdev, unsigned int dev)
+int radio_isa_common_remove(struct radio_isa_card *isa, unsigned region_size)
 {
-	struct radio_isa_card *isa = dev_get_drvdata(pdev);
 	const struct radio_isa_ops *ops = isa->drv->ops;
 
 	ops->s_mute_volume(isa, true, isa->volume ? isa->volume->cur.val : 0);
 	video_unregister_device(&isa->vdev);
 	v4l2_ctrl_handler_free(&isa->hdl);
 	v4l2_device_unregister(&isa->v4l2_dev);
-	release_region(isa->io, isa->drv->region_size);
+	release_region(isa->io, region_size);
 	v4l2_info(&isa->v4l2_dev, "Removed radio card %s\n", isa->drv->card);
 	kfree(isa);
 	return 0;
 }
+
+#ifdef CONFIG_PNP
+int radio_isa_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+{
+	struct pnp_driver *pnp_drv = to_pnp_driver(dev->dev.driver);
+	struct radio_isa_driver *drv = container_of(pnp_drv,
+					struct radio_isa_driver, pnp_driver);
+	struct radio_isa_card *isa;
+
+	if (!pnp_port_valid(dev, 0))
+		return -ENODEV;
+
+	isa = radio_isa_alloc(drv, &dev->dev);
+	if (!isa)
+		return -ENOMEM;
+
+	isa->io = pnp_port_start(dev, 0);
+
+	return radio_isa_common_probe(isa, &dev->dev, 0, pnp_port_len(dev, 0));
+}
+EXPORT_SYMBOL_GPL(radio_isa_pnp_probe);
+
+int radio_isa_pnp_remove(struct pnp_dev *dev)
+{
+	struct radio_isa_card *isa = dev_get_drvdata(&dev->dev);
+	return radio_isa_common_remove(isa, pnp_port_len(dev, 0));
+}
+EXPORT_SYMBOL_GPL(radio_isa_pnp_remove);
+#endif
+
+int radio_isa_remove(struct device *pdev, unsigned int dev)
+{
+	struct radio_isa_card *isa = dev_get_drvdata(pdev);
+	return radio_isa_common_remove(isa, isa->drv->region_size);
+}
 EXPORT_SYMBOL_GPL(radio_isa_remove);
diff --git a/drivers/media/radio/radio-isa.h b/drivers/media/radio/radio-isa.h
index 8a0ea84..0e7dc25 100644
--- a/drivers/media/radio/radio-isa.h
+++ b/drivers/media/radio/radio-isa.h
@@ -24,6 +24,7 @@
 #define _RADIO_ISA_H_
 
 #include <linux/isa.h>
+#include <linux/pnp.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
@@ -76,6 +77,9 @@ struct radio_isa_ops {
 /* Top level structure needed to instantiate the cards */
 struct radio_isa_driver {
 	struct isa_driver driver;
+#ifdef CONFIG_PNP
+	struct pnp_driver pnp_driver;
+#endif
 	const struct radio_isa_ops *ops;
 	/* The module_param_array with the specified I/O ports */
 	int *io_params;
@@ -101,5 +105,10 @@ struct radio_isa_driver {
 int radio_isa_match(struct device *pdev, unsigned int dev);
 int radio_isa_probe(struct device *pdev, unsigned int dev);
 int radio_isa_remove(struct device *pdev, unsigned int dev);
+#ifdef CONFIG_PNP
+int radio_isa_pnp_probe(struct pnp_dev *dev,
+			const struct pnp_device_id *dev_id);
+int radio_isa_pnp_remove(struct pnp_dev *dev);
+#endif
 
 #endif



diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 9d7fdae..6ea0e23 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -29,6 +29,8 @@
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/mutex.h>
 #include <linux/io.h>		/* outb, outb_p			*/
+#include <linux/pnp.h>
+#include <linux/slab.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include "radio-isa.h"
@@ -282,6 +284,16 @@ static const struct radio_isa_ops gemtek_ops = {
 
 static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
 
+#ifdef CONFIG_PNP
+static struct pnp_device_id gemtek_pnp_devices[] = {
+	/* AOpen FX-3D/Pro Radio */
+	{.id = "ADS7183", .driver_data = 0},
+	{.id = ""}
+};
+
+MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
+#endif
+
 static struct radio_isa_driver gemtek_driver = {
 	.driver = {
 		.match		= radio_isa_match,
@@ -291,6 +303,14 @@ static struct radio_isa_driver gemtek_driver = {
 			.name	= "radio-gemtek",
 		},
 	},
+#ifdef CONFIG_PNP
+	.pnp_driver = {
+		.name		= "radio-gemtek",
+		.id_table	= gemtek_pnp_devices,
+		.probe		= radio_isa_pnp_probe,
+		.remove		= radio_isa_pnp_remove,
+	},
+#endif
 	.io_params = io,
 	.radio_nr_params = radio_nr,
 	.io_ports = gemtek_ioports,
@@ -304,12 +324,14 @@ static struct radio_isa_driver gemtek_driver = {
 static int __init gemtek_init(void)
 {
 	gemtek_driver.probe = probe;
+	pnp_register_driver(&gemtek_driver.pnp_driver);
 	return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
 }
 
 static void __exit gemtek_exit(void)
 {
 	hardmute = 1;	/* Turn off PLL */
+	pnp_unregister_driver(&gemtek_driver.pnp_driver);
 	isa_unregister_driver(&gemtek_driver.driver);
 }
 



-- 
Ondrej Zary

  reply	other threads:[~2012-02-28 21:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-18 16:33 PnP support for the new ISA radio framework? Ondrej Zary
2012-02-22 20:33 ` Ondrej Zary
2012-02-24  9:35   ` Hans Verkuil
2012-02-28 21:08     ` Ondrej Zary [this message]
  -- strict thread matches above, loose matches on Subject: below --
2012-03-01 19:25 [RFC PATCH] PnP support for the new ISA radio framework Ondrej Zary
2012-03-02  8:55 ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201202282208.39343.linux@rainbow-software.org \
    --to=linux@rainbow-software.org \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.