From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Henrik Rydberg" Subject: Re: include patch to solve bug 916319 Date: Wed, 29 Feb 2012 12:54:43 +0100 Message-ID: <20120229115443.GA22868@polaris.bitmath.org> References: <4F4E0451.5050106@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from smtprelay-b22.telenor.se ([195.54.99.213]:33890 "EHLO smtprelay-b22.telenor.se" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755146Ab2B2LyS (ORCPT ); Wed, 29 Feb 2012 06:54:18 -0500 Received: from ipb4.telenor.se (ipb4.telenor.se [195.54.127.167]) by smtprelay-b22.telenor.se (Postfix) with ESMTP id 62901C6D7 for ; Wed, 29 Feb 2012 12:54:16 +0100 (CET) Content-Disposition: inline In-Reply-To: <4F4E0451.5050106@gmail.com> Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: Diego Carrera Gallego Cc: linux-input@vger.kernel.org, "Gustavo F. Padovan" Hi Diego, > According instructions of Joseph Salisbury at > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916319 > > I send this patch, in order to include into ubuntu kernel, > > Credits to: eran, http://thread.gmane.org/gmane.linux.bluez.kernel/18801 > > > Changelog: Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012. > Description: You sent your request to the linux input subsystem, which (usually) does not handle bluetooth patches. I have added the correct maintainer to CC here. It seems the patch you refer to is already on-route to the mainline kernel, although it has yet to appear in linux-next. Thus, nothing more should need to be done but wait. Once the patch is available upstream, if you want the attention of the ubuntu kernel developers, try sending a mail to their list (kernel-team@lists.ubuntu.com), asking for a cherry-pick. Make sure to motivate the pick properly. :-) > > The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012 > and requires a firmware to be uploaded before it's usable. > > output of usb-devices for this module: > T: Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#= 6 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=13d3 ProdID=3375 Rev=00.02 > S: Manufacturer=Atheros Communications > S: Product=Bluetooth USB Host Controller > S: SerialNumber=Alaska Day 2006 > C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > > Signed-off-by: Diego Carrera diegocarrera2000@gmail.com > > > ------------ > > Please, tell me if everything is ok > > Thanks so much > > Diego > > diff -ur linux-3.2.5.orig/drivers/bluetooth/ath3k.c linux-3.2.5/drivers/bluetooth/ath3k.c > --- linux-3.2.5.orig/drivers/bluetooth/ath3k.c 2012-02-06 18:47:00.000000000 +0100 > +++ linux-3.2.5/drivers/bluetooth/ath3k.c 2012-02-07 15:09:33.918295301 +0100 > @@ -70,6 +70,7 @@ > > /* Atheros AR3012 with sflash firmware*/ > { USB_DEVICE(0x0CF3, 0x3004) }, > + { USB_DEVICE(0x13d3, 0x3375) }, > > /* Atheros AR5BBU12 with sflash firmware */ > { USB_DEVICE(0x0489, 0xE02C) }, > @@ -86,6 +87,7 @@ > > /* Atheros AR3012 with sflash firmware*/ > { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, > + { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, > > { } /* Terminating entry */ > }; > diff -ur linux-3.2.5.orig/drivers/bluetooth/btusb.c linux-3.2.5/drivers/bluetooth/btusb.c > --- linux-3.2.5.orig/drivers/bluetooth/btusb.c 2012-02-06 18:47:00.000000000 +0100 > +++ linux-3.2.5/drivers/bluetooth/btusb.c 2012-02-07 15:09:33.918295301 +0100 > @@ -125,6 +125,7 @@ > > /* Atheros 3012 with sflash firmware */ > { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, > + { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, > > /* Atheros AR5BBU12 with sflash firmware */ > { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, Thanks, Henrik