From: bugzilla-daemon@bugzilla.kernel.org
To: dri-devel@lists.freedesktop.org
Subject: [Bug 42727] radeon KMS with CRT TV
Date: Thu, 1 Mar 2012 16:13:22 GMT [thread overview]
Message-ID: <201203011613.q21GDM6j010137@bugzilla.kernel.org> (raw)
In-Reply-To: <bug-42727-2300@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=42727
--- Comment #27 from Egor Y. Egorov <egorov_egor@bk.ru> 2012-03-01 16:13:21 ---
No, did not help. :(
$ xrandr --verbose
Screen 0: minimum 320 x 200, current 2304 x 1024, maximum 8192 x 8192
DVI-0 connected 1280x1024+0+0 (0x54) normal (normal left inverted right x axis
y axis) 337mm x 270mm
Identifier: 0x51
Timestamp: 264987
Subpixel: horizontal rgb
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones: DVI-1
CRTC: 0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff000469b4175b070000
2f0f010380221b962ac5c8a3574a9c23
12484cbfee0081800101010101010101
010101010101302a009851002a403070
1300510e1100001e000000fd003c4b1e
410b000a202020202020000000fc0041
53555320504d313754550a20000000ff
0035414c373030313838330a2020006f
load detection: 1 (0x00000001) range: (0,1)
underscan vborder: 0 (0x00000000) range: (0,128)
underscan hborder: 0 (0x00000000) range: (0,128)
underscan: off
supported: off on auto
coherent: 1 (0x00000001) range: (0,1)
1280x1024 (0x54) 108.0MHz +HSync +VSync *current +preferred
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1024x768 (0x55) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x56) 75.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1328 skew 0 clock 56.5KHz
v: height 768 start 771 end 777 total 806 clock 70.1Hz
1024x768 (0x57) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
832x624 (0x58) 57.3MHz -HSync -VSync
h: width 832 start 864 end 928 total 1152 skew 0 clock 49.7KHz
v: height 624 start 625 end 628 total 667 clock 74.6Hz
800x600 (0x59) 50.0MHz +HSync +VSync
h: width 800 start 856 end 976 total 1040 skew 0 clock 48.1KHz
v: height 600 start 637 end 643 total 666 clock 72.2Hz
800x600 (0x5a) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x5b) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
800x600 (0x5c) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x5d) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 491 total 520 clock 72.8Hz
640x480 (0x5e) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x5f) 30.2MHz -HSync -VSync
h: width 640 start 704 end 768 total 864 skew 0 clock 35.0KHz
v: height 480 start 483 end 486 total 525 clock 66.7Hz
640x480 (0x60) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x61) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
S-video connected 1024x768+1280+0 (0x177) normal (normal left inverted right x
axis y axis) 0mm x 0mm
Identifier: 0x52
Timestamp: 264987
Subpixel: no subpixels
Gamma: 1.0:1.0:1.0
Brightness: 1.0
Clones:
CRTC: 1
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
tv standard: pal
supported: ntsc pal pal-m pal-60
ntsc-j scart-pal pal-cn secam
load detection: 1 (0x00000001) range: (0,1)
1024x768 (0x177) 63.5MHz -HSync +VSync *current
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock 47.8KHz
v: height 768 start 771 end 775 total 798 clock 59.9Hz
800x600 (0x178) 38.2MHz -HSync +VSync
h: width 800 start 832 end 912 total 1024 skew 0 clock 37.4KHz
v: height 600 start 603 end 607 total 624 clock 59.9Hz
848x480 (0x179) 31.5MHz -HSync +VSync
h: width 848 start 872 end 952 total 1056 skew 0 clock 29.8KHz
v: height 480 start 483 end 493 total 500 clock 59.7Hz
720x480 (0x17a) 26.8MHz -HSync +VSync
h: width 720 start 744 end 808 total 896 skew 0 clock 29.9KHz
v: height 480 start 483 end 493 total 500 clock 59.7Hz
640x480 (0x17b) 23.8MHz -HSync +VSync
h: width 640 start 664 end 720 total 800 skew 0 clock 29.7KHz
v: height 480 start 483 end 487 total 500 clock 59.4Hz
DVI-1 disconnected (normal left inverted right x axis y axis)
Identifier: 0x53
Timestamp: 264987
Subpixel: horizontal rgb
Clones: DVI-0
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
load detection: 1 (0x00000001) range: (0,1)
underscan vborder: 0 (0x00000000) range: (0,128)
underscan hborder: 0 (0x00000000) range: (0,128)
underscan: off
supported: off on auto
coherent: 1 (0x00000001) range: (0,1)
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
next prev parent reply other threads:[~2012-03-01 16:13 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-04 12:06 [Bug 42727] New: radeon KMS with CRT TV bugzilla-daemon
2012-02-04 12:25 ` [Bug 42727] " bugzilla-daemon
2012-02-04 12:37 ` bugzilla-daemon
2012-02-09 9:13 ` bugzilla-daemon
2012-02-09 17:48 ` bugzilla-daemon
2012-02-09 18:29 ` bugzilla-daemon
2012-02-21 16:37 ` bugzilla-daemon
2012-02-26 14:12 ` bugzilla-daemon
2012-02-26 17:41 ` bugzilla-daemon
2012-02-27 2:13 ` bugzilla-daemon
2012-02-27 13:54 ` bugzilla-daemon
2012-02-27 14:26 ` bugzilla-daemon
2012-02-27 14:26 ` bugzilla-daemon
2012-02-27 15:31 ` bugzilla-daemon
2012-02-28 2:10 ` bugzilla-daemon
2012-02-28 12:49 ` bugzilla-daemon
2012-02-28 12:50 ` bugzilla-daemon
2012-02-28 12:50 ` bugzilla-daemon
2012-02-28 12:50 ` bugzilla-daemon
2012-02-28 15:50 ` bugzilla-daemon
2012-02-28 16:29 ` bugzilla-daemon
2012-02-29 21:04 ` bugzilla-daemon
2012-03-01 13:39 ` bugzilla-daemon
2012-03-01 14:40 ` bugzilla-daemon
2012-03-01 14:45 ` bugzilla-daemon
2012-03-01 15:04 ` bugzilla-daemon
2012-03-01 15:53 ` bugzilla-daemon
2012-03-01 16:13 ` bugzilla-daemon [this message]
2012-03-01 16:18 ` bugzilla-daemon
2012-03-01 16:26 ` bugzilla-daemon
2012-03-02 13:34 ` bugzilla-daemon
2012-03-02 13:35 ` bugzilla-daemon
2012-03-03 10:03 ` bugzilla-daemon
2012-03-03 10:04 ` bugzilla-daemon
2012-03-03 10:04 ` bugzilla-daemon
2012-03-03 10:05 ` bugzilla-daemon
2012-03-03 10:05 ` bugzilla-daemon
2012-03-03 10:06 ` bugzilla-daemon
2012-03-03 10:07 ` bugzilla-daemon
2012-03-03 10:07 ` bugzilla-daemon
2012-03-03 10:07 ` bugzilla-daemon
2012-03-03 10:08 ` bugzilla-daemon
2012-03-03 10:08 ` bugzilla-daemon
2012-03-03 10:09 ` bugzilla-daemon
2012-03-03 10:10 ` bugzilla-daemon
2012-03-03 10:10 ` bugzilla-daemon
2012-04-01 4:52 ` bugzilla-daemon
2012-04-01 13:03 ` bugzilla-daemon
2012-04-01 15:29 ` bugzilla-daemon
2012-05-29 4:34 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203011613.q21GDM6j010137@bugzilla.kernel.org \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.