From: Dan Williams <dan.j.williams@intel.com>
To: linux-scsi@vger.kernel.org
Cc: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Subject: [isci-rnc PATCH v1 28/37] isci: Added timeouts to RNC suspensions in the abort path.
Date: Thu, 22 Mar 2012 17:30:23 -0700 [thread overview]
Message-ID: <20120323003023.18065.12405.stgit@dwillia2-linux.jf.intel.com> (raw)
In-Reply-To: <20120323002504.18065.45709.stgit@dwillia2-linux.jf.intel.com>
From: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
This change adds timeouts to the RNC suspension wait. It makes the
suspend and resume timeouts the same.
The previous resume timeout of 5 ms was too short, and timeouts were
seen in resumptions of devices in the abort task/LUN reset path - which
would receive an RNC resumed message within a tenth of a second later.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
drivers/scsi/isci/remote_device.c | 58 +++++++++++++++++++++++++++----
drivers/scsi/isci/remote_node_context.c | 8 ++--
2 files changed, 55 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c
index 37e9bde..be9f0e0 100644
--- a/drivers/scsi/isci/remote_device.c
+++ b/drivers/scsi/isci/remote_device.c
@@ -207,23 +207,67 @@ enum sci_status isci_remote_device_terminate_requests(
"about to wait\n",
__func__, idev, ireq, idev->started_request_count,
rnc_suspend_count, idev->rnc.suspend_count);
+
+ #define MAX_SUSPEND_MSECS 10000
if (ireq) {
/* Terminate a specific TC. */
set_bit(IREQ_NO_AUTO_FREE_TAG, &ireq->flags);
sci_remote_device_terminate_req(ihost, idev, 0, ireq);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- wait_event(ihost->eventq,
- isci_check_reqterm(ihost, idev, ireq,
- rnc_suspend_count));
+ if (!wait_event_timeout(ihost->eventq,
+ isci_check_reqterm(ihost, idev, ireq,
+ rnc_suspend_count),
+ msecs_to_jiffies(MAX_SUSPEND_MSECS))) {
+
+ dev_warn(&ihost->pdev->dev, "%s host%d timeout single\n",
+ __func__, ihost->id);
+ dev_dbg(&ihost->pdev->dev,
+ "%s: ******* Timeout waiting for "
+ "suspend; idev=%p, current state %s; "
+ "started_request_count=%d, flags=%lx\n\t"
+ "rnc_suspend_count=%d, rnc.suspend_count=%d "
+ "RNC: current state %s, current "
+ "suspend_type %x dest state %d;\n"
+ "ireq=%p, ireq->flags = %lx\n",
+ __func__, idev,
+ dev_state_name(idev->sm.current_state_id),
+ idev->started_request_count, idev->flags,
+ rnc_suspend_count, idev->rnc.suspend_count,
+ rnc_state_name(idev->rnc.sm.current_state_id),
+ idev->rnc.suspend_type,
+ idev->rnc.destination_state,
+ ireq, ireq->flags);
+ }
clear_bit(IREQ_NO_AUTO_FREE_TAG, &ireq->flags);
isci_free_tag(ihost, ireq->io_tag);
} else {
/* Terminate all TCs. */
sci_remote_device_terminate_requests(idev);
spin_unlock_irqrestore(&ihost->scic_lock, flags);
- wait_event(ihost->eventq,
- isci_check_devempty(ihost, idev,
- rnc_suspend_count));
+ if (!wait_event_timeout(ihost->eventq,
+ isci_check_devempty(ihost, idev,
+ rnc_suspend_count),
+ msecs_to_jiffies(MAX_SUSPEND_MSECS))) {
+
+ dev_warn(&ihost->pdev->dev, "%s host%d timeout all\n",
+ __func__, ihost->id);
+ dev_dbg(&ihost->pdev->dev,
+ "%s: ******* Timeout waiting for "
+ "suspend; idev=%p, current state %s; "
+ "started_request_count=%d, flags=%lx\n\t"
+ "rnc_suspend_count=%d, "
+ "RNC: current state %s, "
+ "rnc.suspend_count=%d, current "
+ "suspend_type %x dest state %d\n",
+ __func__, idev,
+ dev_state_name(idev->sm.current_state_id),
+ idev->started_request_count, idev->flags,
+ rnc_suspend_count,
+ rnc_state_name(idev->rnc.sm.current_state_id),
+ idev->rnc.suspend_count,
+ idev->rnc.suspend_type,
+ idev->rnc.destination_state);
+ }
}
dev_dbg(&ihost->pdev->dev, "%s: idev=%p, wait done\n",
__func__, idev);
@@ -1315,7 +1359,7 @@ void isci_remote_device_wait_for_resume_from_abort(
dev_dbg(scirdev_to_dev(idev), "%s: starting resume wait: %p\n",
__func__, idev);
- #define MAX_RESUME_MSECS 5
+ #define MAX_RESUME_MSECS 10000
if (!wait_event_timeout(ihost->eventq,
(!test_bit(IDEV_ABORT_PATH_RESUME_PENDING,
&idev->flags)
diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c
index b698081..a0a62e3 100644
--- a/drivers/scsi/isci/remote_node_context.c
+++ b/drivers/scsi/isci/remote_node_context.c
@@ -445,7 +445,7 @@ enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_con
case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
/* We really dont care if the hardware is going to suspend
* the device since it's being invalidated anyway */
- dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
"%s: SCIC Remote Node Context 0x%p was "
"suspeneded by hardware while being "
"invalidated.\n", __func__, sci_rnc);
@@ -464,7 +464,7 @@ enum sci_status sci_remote_node_context_event_handler(struct sci_remote_node_con
case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX:
/* We really dont care if the hardware is going to suspend
* the device since it's being resumed anyway */
- dev_dbg(scirdev_to_dev(rnc_to_dev(sci_rnc)),
+ dev_warn(scirdev_to_dev(rnc_to_dev(sci_rnc)),
"%s: SCIC Remote Node Context 0x%p was "
"suspeneded by hardware while being resumed.\n",
__func__, sci_rnc);
@@ -568,9 +568,9 @@ enum sci_status sci_remote_node_context_suspend(
RNC_DEST_UNSPECIFIED;
dev_dbg(scirdev_to_dev(idev),
- "%s: current state %d, current suspend_type %x dest state %d,"
+ "%s: current state %s, current suspend_type %x dest state %d,"
" arg suspend_reason %d, arg suspend_type %x",
- __func__, state, sci_rnc->suspend_type,
+ __func__, rnc_state_name(state), sci_rnc->suspend_type,
sci_rnc->destination_state, suspend_reason,
suspend_type);
next prev parent reply other threads:[~2012-03-23 0:14 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-23 0:27 [isci-rnc PATCH v1 00/37] remote node context rework Dan Williams
2012-03-23 0:27 ` [isci-rnc PATCH v1 01/37] isci: Manage the link layer hang detect timer for RNC suspensions Dan Williams
2012-03-23 0:27 ` [isci-rnc PATCH v1 02/37] isci: Fixed bug in resumption from RNC Tx/Rx suspend state Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 03/37] isci: Handle all suspending TC completions Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 04/37] isci: Terminate outstanding TCs on TX/RX RNC suspensions Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 05/37] isci: Manage device suspensions during TC terminations Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 06/37] isci: Remote device must be suspended for NCQ cleanup Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 07/37] isci: Remote device stop also suspends the RNC and terminates I/O Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 08/37] isci: Escalate to I_T_Nexus_Reset when the device is gone Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 09/37] isci: Redesign device suspension, abort, cleanup Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 10/37] isci: Add suspension cases for RNC INVALIDATING, POSTING states Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 11/37] isci: Device access in the error path does not depend on IDEV_GONE Dan Williams
2012-03-23 0:28 ` [isci-rnc PATCH v1 12/37] isci: All pending TCs are terminated when the RNC is invalidated Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 13/37] isci: Only set IDEV_GONE in the device stop path Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 14/37] isci: Remove isci_device reqs_in_process and dev_node from isci_device Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 15/37] isci: Distinguish between remote device suspension cases Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 16/37] isci: Fix the terminated I/O to not call sas_task_abort() Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 17/37] isci: Save the suspension hint for upcoming suspensions Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 18/37] isci: Manage the LLHANG timer enable/disable per-device Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 19/37] isci: Make sure all TCs are terminated and cleaned in LUN reset Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 20/37] isci: Implement waiting for suspend in the abort path Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 21/37] isci: When in the abort path, defeat other resume calls until done Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 22/37] isci: Callbacks to libsas occur under scic_lock and are synchronized Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 23/37] isci: Manage tag releases differently when aborting tasks Dan Williams
2012-03-23 0:29 ` [isci-rnc PATCH v1 24/37] isci: Fix RNC suspend call for SCI_RESUMING state Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 25/37] isci: Wait for RNC resumption before leaving the abort path Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 26/37] isci: Directly control IREQ_ABORT_PATH_ACTIVE when completing TMFs Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 27/37] isci: Add protocol indicator for TMF requests Dan Williams
2012-03-23 0:30 ` Dan Williams [this message]
2012-03-23 0:30 ` [isci-rnc PATCH v1 29/37] isci: Change the phy control and link reset interface for HW reasons Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 30/37] isci: Don't wait for an RNC suspend if it's being destroyed Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 31/37] isci: Restore the ATAPI device RNC management code Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 32/37] isci: Check IDEV_GONE before performing abort path operations Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 33/37] isci: Remove obviated host callback list Dan Williams
2012-03-23 0:30 ` [isci-rnc PATCH v1 34/37] isci: Manage the IREQ_NO_AUTO_FREE_TAG under scic_lock Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 35/37] isci: Fix RNC AWAIT_SUSPENSION->INVALIDATING transition Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 36/37] isci: Fixed RNC bug that lost the suspension or resumption during destroy Dan Williams
2012-03-23 0:31 ` [isci-rnc PATCH v1 37/37] isci: End the RNC resumption wait when the RNC is destroyed Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120323003023.18065.12405.stgit@dwillia2-linux.jf.intel.com \
--to=dan.j.williams@intel.com \
--cc=jeffrey.d.skirvin@intel.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.