All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael Büsch" <m@bues.ch>
To: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: linux-media <linux-media@vger.kernel.org>,
	Hans-Frieder Vogt <hfvogt@gmx.net>
Subject: [PATCH] Add Fitipower fc0011 tuner driver
Date: Thu, 29 Mar 2012 02:01:34 +0200	[thread overview]
Message-ID: <20120329020134.1a18e39e@milhouse> (raw)

[-- Attachment #1: Type: text/plain, Size: 17304 bytes --]

This adds a driver for the Fitipower fc0011 DVB-t tuner.

Signed-off-by: Michael Buesch <m@bues.ch>

---

The driver is tested with the af903x driver.

Mauro Carvalho Chehab, I'm actually aiming on getting this driver
merged into the media-tree now.

Hans-Frieder Vogt, what are your plans on getting af903x merged?
As the driver does actually work, we should focus on merging it ASAP.
That would help further development a _lot_.


Index: linux/drivers/media/common/tuners/Kconfig
===================================================================
--- linux.orig/drivers/media/common/tuners/Kconfig	2012-02-28 14:26:19.000000000 +0100
+++ linux/drivers/media/common/tuners/Kconfig	2012-03-28 23:53:55.942050978 +0200
@@ -204,6 +204,13 @@
 	help
 	  NXP TDA18218 silicon tuner driver.
 
+config MEDIA_TUNER_FC0011
+	tristate "Fitipower FC0011 silicon tuner"
+	depends on VIDEO_MEDIA && I2C
+	default m if MEDIA_TUNER_CUSTOMISE
+	help
+	  Fitipower FC0011 silicon tuner driver.
+
 config MEDIA_TUNER_TDA18212
 	tristate "NXP TDA18212 silicon tuner"
 	depends on VIDEO_MEDIA && I2C
Index: linux/drivers/media/common/tuners/Makefile
===================================================================
--- linux.orig/drivers/media/common/tuners/Makefile	2012-03-28 23:51:43.000000000 +0200
+++ linux/drivers/media/common/tuners/Makefile	2012-03-28 23:55:08.838315202 +0200
@@ -28,6 +28,7 @@
 obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
 obj-$(CONFIG_MEDIA_TUNER_TDA18218) += tda18218.o
 obj-$(CONFIG_MEDIA_TUNER_TDA18212) += tda18212.o
+obj-$(CONFIG_MEDIA_TUNER_FC0011) += fc0011.o
 
 ccflags-y += -I$(srctree)/drivers/media/dvb/dvb-core
 ccflags-y += -I$(srctree)/drivers/media/dvb/frontends
Index: linux/drivers/media/common/tuners/fc0011.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux/drivers/media/common/tuners/fc0011.c	2012-03-28 23:53:42.662004812 +0200
@@ -0,0 +1,495 @@
+/*
+ * Fitipower FC0011 tuner driver
+ *
+ * Copyright (C) 2012 Michael Buesch <m@bues.ch>
+ *
+ * Derived from FC0012 tuner driver:
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "fc0011.h"
+
+
+/* Tuner registers */
+enum {
+	FC11_REG_0,
+	FC11_REG_FA,		/* FA */
+	FC11_REG_FP,		/* FP */
+	FC11_REG_XINHI,		/* XIN high 8 bit */
+	FC11_REG_XINLO,		/* XIN low 8 bit */
+	FC11_REG_VCO,		/* VCO */
+	FC11_REG_VCOSEL,	/* VCO select */
+	FC11_REG_7,		/* Unknown tune reg 7 */
+	FC11_REG_8,		/* Unknown tune reg 8 */
+	FC11_REG_9,
+	FC11_REG_10,		/* Unknown tune reg 10 */
+	FC11_REG_11,		/* Unknown tune reg 11 */
+	FC11_REG_12,
+	FC11_REG_RCCAL,		/* RC calibrate */
+	FC11_REG_VCOCAL,	/* VCO calibrate */
+	FC11_REG_15,
+	FC11_REG_16,		/* Unknown tune reg 16 */
+	FC11_REG_17,
+
+	FC11_NR_REGS,		/* Number of registers */
+};
+
+enum FC11_REG_VCOSEL_bits {
+	FC11_VCOSEL_2		= 0x08, /* VCO select 2 */
+	FC11_VCOSEL_1		= 0x10, /* VCO select 1 */
+	FC11_VCOSEL_CLKOUT	= 0x20, /* Fix clock out */
+	FC11_VCOSEL_BW7M	= 0x40, /* 7MHz bw */
+	FC11_VCOSEL_BW6M	= 0x80, /* 6MHz bw */
+};
+
+enum FC11_REG_RCCAL_bits {
+	FC11_RCCAL_FORCE	= 0x10, /* force */
+};
+
+enum FC11_REG_VCOCAL_bits {
+	FC11_VCOCAL_RUN		= 0,	/* VCO calibration run */
+	FC11_VCOCAL_VALUEMASK	= 0x3F,	/* VCO calibration value mask */
+	FC11_VCOCAL_OK		= 0x40,	/* VCO calibration Ok */
+	FC11_VCOCAL_RESET	= 0x80, /* VCO calibration reset */
+};
+
+
+struct fc0011_priv {
+	struct i2c_adapter *i2c;
+	u8 addr;
+
+	u32 frequency;
+	u32 bandwidth;
+
+	int (*tuner_reset)(unsigned long, unsigned long);
+	unsigned long tuner_reset_arg0;
+	unsigned long tuner_reset_arg1;
+};
+
+
+static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	struct i2c_msg msg = { .addr = priv->addr,
+		.flags = 0, .buf = buf, .len = 2 };
+
+	msleep(1);
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+		dev_err(&priv->i2c->dev,
+			"I2C write reg failed, reg: %02x, val: %02x\n",
+			reg, val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val)
+{
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->addr,
+		  .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = priv->addr,
+		  .flags = I2C_M_RD, .buf = val, .len = 1 },
+	};
+
+	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+		dev_err(&priv->i2c->dev,
+			"I2C read failed, reg: %02x\n", reg);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int fc0011_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+
+	return 0;
+}
+
+static int fc0011_init(struct dvb_frontend *fe)
+{
+	/* nothing to do here */
+	return 0;
+}
+
+static int fc0011_sleep(struct dvb_frontend *fe)
+{
+	/* nothing to do here */
+	return 0;
+}
+
+static int fc0011_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct fc0011_priv *priv = fe->tuner_priv;
+	int err;
+	unsigned int i;
+	u32 freq = p->frequency / 1000;
+	u32 bandwidth = p->bandwidth_hz / 1000;
+	u32 fvco, xin, xdiv, xdivr;
+	u16 frac;
+	u8 fa, fp, vco_sel, vco_cal;
+	u8 regs[FC11_NR_REGS] = { };
+
+	regs[FC11_REG_7] = 0x0F;
+	regs[FC11_REG_8] = 0x3E;
+	regs[FC11_REG_10] = 0xB8;
+	regs[FC11_REG_11] = 0x80;
+	regs[FC11_REG_RCCAL] = 0x04;
+	err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
+	err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
+	err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
+	err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
+	err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
+	if (err)
+		return -EIO;
+
+	/* Set VCO freq and VCO div */
+	if (freq < 54000) {
+		fvco = freq * 64;
+		regs[FC11_REG_VCO] = 0x82;
+	} else if (freq < 108000) {
+		fvco = freq * 32;
+		regs[FC11_REG_VCO] = 0x42;
+	} else if (freq < 216000) {
+		fvco = freq * 16;
+		regs[FC11_REG_VCO] = 0x22;
+	} else if (freq < 432000) {
+		fvco = freq * 8;
+		regs[FC11_REG_VCO] = 0x12;
+	} else {
+		fvco = freq * 4;
+		regs[FC11_REG_VCO] = 0x0A;
+	}
+
+	/* Calc XIN. The PLL reference frequency is 18 MHz. */
+	xdiv = fvco / 18000;
+	frac = fvco - xdiv * 18000;
+	frac = (frac << 15) / 18000;
+	if (frac >= 16384)
+		frac += 32786;
+	if (!frac)
+		xin = 0;
+	else if (frac < 511)
+		xin = 512;
+	else if (frac < 65026)
+		xin = frac;
+	else
+		xin = 65024;
+	regs[FC11_REG_XINHI] = xin >> 8;
+	regs[FC11_REG_XINLO] = xin;
+
+	/* Calc FP and FA */
+	xdivr = xdiv;
+	if (fvco - xdiv * 18000 >= 9000)
+		xdivr += 1; /* round */
+	fp = xdivr / 8;
+	fa = xdivr - fp * 8;
+	if (fa < 2) {
+		fp -= 1;
+		fa += 8;
+	}
+	if (fp > 0x1F) {
+		fp &= 0x1F;
+		fa &= 0xF;
+	}
+	if (fa >= fp) {
+		dev_warn(&priv->i2c->dev,
+			 "fa %02X >= fp %02X, but trying to continue\n",
+			 (unsigned int)(u8)fa, (unsigned int)(u8)fp);
+	}
+	regs[FC11_REG_FA] = fa;
+	regs[FC11_REG_FP] = fp;
+
+	/* Select bandwidth */
+	switch (bandwidth) {
+	case 8000:
+		break;
+	case 7000:
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M;
+		break;
+	default:
+	case 6000:
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M;
+		break;
+	}
+
+	/* Pre VCO select */
+	if (fvco < 2320000) {
+		vco_sel = 0;
+		regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+	} else if (fvco < 3080000) {
+		vco_sel = 1;
+		regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+	} else {
+		vco_sel = 2;
+		regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
+	}
+
+	/* Fix for low freqs */
+	if (freq < 45000) {
+		regs[FC11_REG_FA] = 0x6;
+		regs[FC11_REG_FP] = 0x11;
+	}
+
+	/* Clock out fix */
+	regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT;
+
+	/* Write the cached registers */
+	for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) {
+		err = fc0011_writereg(priv, i, regs[i]);
+		if (err)
+			return err;
+	}
+
+	/* VCO calibration */
+	err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET);
+	if (err)
+		return err;
+	err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
+	if (err)
+		return err;
+	/* Read calib val */
+	err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
+	if (err)
+		return err;
+	msleep(10);
+	err = fc0011_readreg(priv, FC11_REG_VCOCAL, &vco_cal);
+	if (err)
+		return err;
+	if (!(vco_cal & FC11_VCOCAL_OK)) {
+		/* Reset the tuner and try again */
+		err = priv->tuner_reset(priv->tuner_reset_arg0,
+					priv->tuner_reset_arg1);
+		if (err)
+			return -EIO;
+		/* Reinit tuner config */
+		err = 0;
+		for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++)
+			err |= fc0011_writereg(priv, i, regs[i]);
+		err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
+		err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
+		err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
+		err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
+		err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
+		if (err)
+			return -EIO;
+		/* VCO calibration */
+		err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET);
+		if (err)
+			return err;
+		err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
+		if (err)
+			return err;
+		/* Read calib val */
+		err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
+		if (err)
+			return err;
+		msleep(10);
+		err = fc0011_readreg(priv, FC11_REG_VCOCAL, &vco_cal);
+		if (err)
+			return err;
+	}
+	if (!(vco_cal & FC11_VCOCAL_OK)) {
+		dev_err(&priv->i2c->dev, "Failed to read VCO calibration value\n");
+		return -EIO;
+	}
+	vco_cal &= FC11_VCOCAL_VALUEMASK;
+
+	switch (vco_sel) {
+	case 0:
+		if (vco_cal < 8) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RESET);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RUN);
+			if (err)
+				return -EIO;
+		} else {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+		}
+		break;
+	case 1:
+		if (vco_cal < 5) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RESET);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RUN);
+			if (err)
+				return -EIO;
+		} else if (vco_cal <= 48) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+		} else {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RESET);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RUN);
+			if (err)
+				return -EIO;
+		}
+		break;
+	case 2:
+		if (vco_cal > 53) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RESET);
+			err |= fc0011_writereg(priv, FC11_REG_VCOCAL,
+					       FC11_VCOCAL_RUN);
+			if (err)
+				return -EIO;
+		} else {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+		}
+		break;
+	}
+	err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
+	if (err)
+		return err;
+	msleep(10);
+	err = fc0011_readreg(priv, FC11_REG_VCOCAL, &vco_cal);
+	if (err)
+		return err;
+	msleep(10);
+
+	err = fc0011_readreg(priv, FC11_REG_RCCAL, &regs[FC11_REG_RCCAL]);
+	if (err)
+		return err;
+	regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE;
+	err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
+	if (err)
+		return err;
+	err = fc0011_writereg(priv, FC11_REG_16, 0xB);
+	if (err)
+		return err;
+
+	priv->frequency = p->frequency;
+	priv->bandwidth = p->bandwidth_hz;
+
+	return 0;
+}
+
+static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct fc0011_priv *priv = fe->tuner_priv;
+
+	*frequency = priv->frequency;
+
+	return 0;
+}
+
+static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	*frequency = 0;
+
+	return 0;
+}
+
+static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	struct fc0011_priv *priv = fe->tuner_priv;
+
+	*bandwidth = priv->bandwidth;
+
+	return 0;
+}
+
+static const struct dvb_tuner_ops fc0011_tuner_ops = {
+	.info = {
+		.name		= "Fitipower FC0011",
+
+		.frequency_min	= 45000000,
+		.frequency_max	= 1000000000,
+	},
+
+	.release		= fc0011_release,
+
+	.init			= fc0011_init,
+	.sleep			= fc0011_sleep,
+
+	.set_params		= fc0011_set_params,
+
+	.get_frequency		= fc0011_get_frequency,
+	.get_if_frequency	= fc0011_get_if_frequency,
+	.get_bandwidth		= fc0011_get_bandwidth,
+};
+
+struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
+				   struct i2c_adapter *i2c,
+				   u8 i2c_address,
+				   int (*tuner_reset)(unsigned long, unsigned long),
+				   unsigned long tuner_reset_arg0,
+				   unsigned long tuner_reset_arg1)
+{
+	struct fc0011_priv *priv;
+
+	priv = kzalloc(sizeof(struct fc0011_priv), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	priv->i2c = i2c;
+	priv->addr = i2c_address;
+	priv->tuner_reset = tuner_reset;
+	priv->tuner_reset_arg0 = tuner_reset_arg0;
+	priv->tuner_reset_arg1 = tuner_reset_arg1;
+	WARN_ON(!tuner_reset);
+
+	fe->tuner_priv = priv;
+	fe->ops.tuner_ops = fc0011_tuner_ops;
+
+	dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n");
+
+	return fe;
+}
+EXPORT_SYMBOL(fc0011_attach);
+
+MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver");
+MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
+MODULE_LICENSE("GPL");
Index: linux/drivers/media/common/tuners/fc0011.h
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux/drivers/media/common/tuners/fc0011.h	2012-03-28 23:53:42.666004830 +0200
@@ -0,0 +1,28 @@
+#ifndef LINUX_FC0011_H_
+#define LINUX_FC0011_H_
+
+#include "dvb_frontend.h"
+
+#if defined(CONFIG_MEDIA_TUNER_FC0011) ||\
+    defined(CONFIG_MEDIA_TUNER_FC0011_MODULE)
+struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
+				   struct i2c_adapter *i2c,
+				   u8 i2c_address,
+				   int (*tuner_reset)(unsigned long, unsigned long),
+				   unsigned long tuner_reset_arg0,
+				   unsigned long tuner_reset_arg1);
+#else
+static inline
+struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
+				   struct i2c_adapter *i2c,
+				   u8 i2c_address,
+				   int (*tuner_reset)(unsigned long, unsigned long),
+				   unsigned long tuner_reset_arg0,
+				   unsigned long tuner_reset_arg1)
+{
+	dev_err(&i2c->dev, "fc0011 driver disabled in Kconfig\n");
+	return NULL;
+}
+#endif
+
+#endif /* LINUX_FC0011_H_ */
Index: linux/MAINTAINERS
===================================================================
--- linux.orig/MAINTAINERS	2012-03-28 23:52:44.000000000 +0200
+++ linux/MAINTAINERS	2012-03-28 23:53:42.670004864 +0200
@@ -2692,6 +2692,13 @@
 F:	Documentation/hwmon/f71805f
 F:	drivers/hwmon/f71805f.c
 
+FC0011 TUNER DRIVER
+M:	Michael Buesch <m@bues.ch>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	drivers/media/common/tuners/fc0011.h
+F:	drivers/media/common/tuners/fc0011.c
+
 FANOTIFY
 M:	Eric Paris <eparis@redhat.com>
 S:	Maintained


-- 
Greetings, Michael.

PGP encryption is encouraged / 908D8B0E

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

             reply	other threads:[~2012-03-29  0:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-29  0:01 Michael Büsch [this message]
2012-03-29  0:17 ` [PATCH] Add Fitipower fc0011 tuner driver Michael Büsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120329020134.1a18e39e@milhouse \
    --to=m@bues.ch \
    --cc=hfvogt@gmx.net \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.