From: Guenter Roeck <guenter.roeck@ericsson.com>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH] hwmon: k10temp: Add support for AMD Trinity CPUs
Date: Fri, 30 Mar 2012 13:46:47 +0000 [thread overview]
Message-ID: <20120330134647.GA18299@ericsson.com> (raw)
In-Reply-To: <1333108649-22338-1-git-send-email-andre.przywara@amd.com>
On Fri, Mar 30, 2012 at 07:57:29AM -0400, Andre Przywara wrote:
> The on-chip northbridge's temperature sensor of the upcoming
> AMD Trinity CPUs works the same as for the previous CPUs.
> Since it has a different PCI-ID, we just add the new one to the list
> supported by k10temp.
> This allows us to use the k10temp driver on those CPUs.
>
> On that way move the PCI-ID definition for the Llano and Brazos
> northbridges from pci_ids.h into this driver, since it's the only
> user and the header of pci_ids.h tell us to do so.
>
Actually, it says that you should only _add_ an entry if that entry is shared,
not that you should remove entries. So, as Clemens pointed out, this is
an unnecessary change.
Please re-submit w/o that removal. I don't want to have to touch pci_ids.h
that late in the commit window, much less after the commit window closes.
Thanks,
Guenter
> Signed-off-by: Andre Przywara <andre.przywara@amd.com>
> ---
> Documentation/hwmon/k10temp | 2 +-
> drivers/hwmon/Kconfig | 3 ++-
> drivers/hwmon/k10temp.c | 7 ++++++-
> include/linux/pci_ids.h | 1 -
> 4 files changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
> index a10f736..90956b6 100644
> --- a/Documentation/hwmon/k10temp
> +++ b/Documentation/hwmon/k10temp
> @@ -11,7 +11,7 @@ Supported chips:
> Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
> * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
> * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
> -* AMD Family 15h processors: "Bulldozer"
> +* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
>
> Prefix: 'k10temp'
> Addresses scanned: PCI space
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 5b32d56..7d7b63d 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -253,7 +253,8 @@ config SENSORS_K10TEMP
> If you say yes here you get support for the temperature
> sensor(s) inside your CPU. Supported are later revisions of
> the AMD Family 10h and all revisions of the AMD Family 11h,
> - 12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
> + 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
> + microarchitectures.
>
> This driver can also be built as a module. If so, the module
> will be called k10temp.
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index aba29d6..0af326d 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -33,6 +33,10 @@ static bool force;
> module_param(force, bool, 0444);
> MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
>
> +/* PCI-IDs for Northbridge devices not used anywhere else */
> +#define PCI_DEVICE_ID_AMD_12H_14H_NB_F3 0x1703
> +#define PCI_DEVICE_ID_AMD_15H_M10H_NB_F3 0x1403
> +
> /* CPUID function 0x80000001, ebx */
> #define CPUID_PKGTYPE_MASK 0xf0000000
> #define CPUID_PKGTYPE_F 0x00000000
> @@ -208,8 +212,9 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
> static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
> - { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_12H_14H_NB_F3) },
> { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
> + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_NB_F3) },
> {}
> };
> MODULE_DEVICE_TABLE(pci, k10temp_id_table);
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 3329965..e6d3db1 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -523,7 +523,6 @@
> #define PCI_DEVICE_ID_AMD_15H_NB_F3 0x1603
> #define PCI_DEVICE_ID_AMD_15H_NB_F4 0x1604
> #define PCI_DEVICE_ID_AMD_15H_NB_F5 0x1605
> -#define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703
> #define PCI_DEVICE_ID_AMD_LANCE 0x2000
> #define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001
> #define PCI_DEVICE_ID_AMD_SCSI 0x2020
> --
> 1.7.4.4
>
>
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
prev parent reply other threads:[~2012-03-30 13:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-30 11:57 [lm-sensors] [PATCH] hwmon: k10temp: Add support for AMD Trinity CPUs Andre Przywara
2012-03-30 12:20 ` Clemens Ladisch
2012-03-30 13:46 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120330134647.GA18299@ericsson.com \
--to=guenter.roeck@ericsson.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.