From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Sat, 14 Apr 2012 21:58:12 +0000 Subject: Re: [lm-sensors] sensor 3.3.1 and previous do not properly detect/show CPUTIN temperature - maximus Message-Id: <20120414215812.GA9319@ericsson.com> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Sat, Apr 14, 2012 at 09:09:59AM -0400, Martin Suchanek wrote: > Hi, >=20 > I have found for long time ago that CPUTIN temperature is not showed corr= ectly > by sensors command: >=20 > coretemp-isa-0000 > Adapter: ISA adapter > Physical id 0:=A0 +34.0=B0C=A0 (high =3D +80.0=B0C, crit =3D +98.0=B0C) > Core 0:=A0=A0=A0=A0=A0=A0=A0=A0 +30.0=B0C=A0 (high =3D +80.0=B0C, crit = =3D +98.0=B0C) > ... > nct6776-isa-0290 > Adapter: ISA adapter > ... > CPUTIN:=A0=A0=A0=A0=A0=A0=A0 -60.0=B0C=A0 (high =3D +80.0=B0C, hyst =3D += 75.0=B0C)=A0 sensor =3D diode > ... >=20 > I have cheked it in BIOS and in AI Suite in windows 7 64 bit and consulte= d it > with ASUS technical support and everything is working properly. > So , hardware is fine. Software in windows is fine. Only linux software i= s not > correct. > I have tried to detect-sensor many times and it is still the same. > If there is some kind of tweak in config please let me know but it seems = to me > there is something wrong with lm-sensors 3.3.1. >=20 > ... > Intel digital thermal sensor...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Success! > =A0=A0=A0 (driver `coretemp') > ... > Found `Nuvoton NCT6776F Super IO Sensors'=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0 Success! > ... > Driver `w83627ehf': > =A0 * ISA bus, address 0x290 > =A0=A0=A0 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) >=20 > Driver `coretemp': > =A0 * Chip `Intel digital thermal sensor' (confidence: 9) > ... >=20 > my /etc/modules: > ... > coretemp > w83627ehf > ... >=20 > This error have appeared on maximus iv extreme motherboard Revision 3 , B= IOS > from 1404 to 3202 (latest) > linux ubuntu natty -> oneiric 64 bit kernel from 2.6.39 up to 3.0.0-19 > commercial version (tested on 3.3.1 compiled by me) >=20 > Could you please help me to solve it ? >=20 CPUTIN with NCT6776F is kind of problematic. It shows up wrong on many (but= not all) boards. On some boards, the displayed temperature even decreases as the CPU tempera= ture increases. There may be some magic configuration setting which need to be fixed, but I= have not been=20 able to find out what those would be. I have a new experimental driver for NCT6775F and NCT6776F at https://githu= b.com/groeck/nct6775, in case you want to give it a try. With this driver, it is possible to set = the temperature sensor type (1, 3, or 4). It doesn't help with my P8H67-V board for any of the possible= settings, but maybe you are more lucky. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors