From: "Michael S. Tsirkin" <mst@redhat.com>
To: Basil Gor <basil.gor@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: Re: [PATCH v3 2/2] macvtap: restore vlan header on user read
Date: Fri, 4 May 2012 02:30:29 +0300 [thread overview]
Message-ID: <20120503233029.GA31083@redhat.com> (raw)
In-Reply-To: <20120503231152.GA8602@nanobar>
On Fri, May 04, 2012 at 03:11:52AM +0400, Basil Gor wrote:
> Below is a bit reworked version I've tested.
Will review thanks.
Can you add the signature according to the rules pls?
> ---
> drivers/net/macvtap.c | 43 ++++++++++++++++++++++++++++++++++++++-----
> 1 files changed, 38 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
> index 0427c65..cb8fd50 100644
> --- a/drivers/net/macvtap.c
> +++ b/drivers/net/macvtap.c
> @@ -1,5 +1,6 @@
> #include <linux/etherdevice.h>
> #include <linux/if_macvlan.h>
> +#include <linux/if_vlan.h>
> #include <linux/interrupt.h>
> #include <linux/nsproxy.h>
> #include <linux/compat.h>
> @@ -759,6 +760,8 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
> struct macvlan_dev *vlan;
> int ret;
> int vnet_hdr_len = 0;
> + int vlan_offset = 0;
> + int copied;
>
> if (q->flags & IFF_VNET_HDR) {
> struct virtio_net_hdr vnet_hdr;
> @@ -773,18 +776,48 @@ static ssize_t macvtap_put_user(struct macvtap_queue *q,
> if (memcpy_toiovecend(iv, (void *)&vnet_hdr, 0, sizeof(vnet_hdr)))
> return -EFAULT;
> }
> + copied = vnet_hdr_len;
> +
> + if (!vlan_tx_tag_present(skb))
> + len = min_t(int, skb->len, len);
> + else {
> + int copy;
> + struct {
> + __be16 h_vlan_proto;
> + __be16 h_vlan_TCI;
> + } veth;
> + veth.h_vlan_proto = htons(ETH_P_8021Q);
> + veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb));
> +
> + vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto);
> + len = min_t(int, skb->len + VLAN_HLEN, len);
> +
> + copy = min_t(int, vlan_offset, len);
> + ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy);
> + len -= copy;
> + copied += copy;
> + if (ret || !len)
> + goto done;
> +
> + copy = min_t(int, sizeof(veth), len);
> + ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy);
> + len -= copy;
> + copied += copy;
> + if (ret || !len)
> + goto done;
> + }
>
> - len = min_t(int, skb->len, len);
> -
> - ret = skb_copy_datagram_const_iovec(skb, 0, iv, vnet_hdr_len, len);
> + ret = skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len);
> + copied += len;
>
> +done:
> rcu_read_lock_bh();
> vlan = rcu_dereference_bh(q->vlan);
> if (vlan)
> - macvlan_count_rx(vlan, len, ret == 0, 0);
> + macvlan_count_rx(vlan, copied - vnet_hdr_len, ret == 0, 0);
> rcu_read_unlock_bh();
>
> - return ret ? ret : (len + vnet_hdr_len);
> + return ret ? ret : copied;
> }
>
> static ssize_t macvtap_do_read(struct macvtap_queue *q, struct kiocb *iocb,
> --
> 1.7.6.5
next prev parent reply other threads:[~2012-05-03 23:30 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-18 18:34 [PATCH] macvlan/macvtap: Fix vlan tagging on user read Basil Gor
2012-04-18 18:54 ` Eric W. Biederman
2012-04-18 19:33 ` Basil Gor
2012-04-20 23:11 ` Basil Gor
2012-04-21 1:49 ` Eric W. Biederman
2012-04-25 17:01 ` [PATCH v3 1/2] vhost-net: fix handle_rx buffer size Basil Gor
2012-04-26 5:30 ` Eric W. Biederman
2012-05-03 12:39 ` Michael S. Tsirkin
2012-05-03 13:16 ` Michael S. Tsirkin
2012-05-03 14:43 ` Basil Gor
2012-04-25 17:01 ` [PATCH v3 2/2] macvtap: restore vlan header on user read Basil Gor
2012-04-26 5:31 ` Eric W. Biederman
2012-05-03 13:07 ` Michael S. Tsirkin
2012-05-03 13:37 ` Eric W. Biederman
2012-05-03 14:31 ` Michael S. Tsirkin
2012-05-03 15:22 ` Basil Gor
2012-05-03 23:11 ` Basil Gor
2012-05-03 23:30 ` Michael S. Tsirkin [this message]
2012-05-03 23:47 ` Basil Gor
2012-05-04 1:06 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120503233029.GA31083@redhat.com \
--to=mst@redhat.com \
--cc=basil.gor@gmail.com \
--cc=davem@davemloft.net \
--cc=ebiederm@xmission.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.