From: Hugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar>
To: Nestor Lopez Casado <nlopezcasad@logitech.com>
Cc: Jonathan Nieder <jrnieder@gmail.com>,
linux-input@vger.kernel.org,
Benjamin Tissoires <benjamin.tissoires@enac.fr>,
671292@bugs.debian.org
Subject: Re: [bug?] [powerpc] hid_logitech_dj: Wireless mouse does not work in xorg or gpm
Date: Sun, 6 May 2012 00:14:29 -0300 [thread overview]
Message-ID: <20120506031428.GA20044@hugoo.com.ar> (raw)
In-Reply-To: <CAE7qMrqtmu+bYYYp43s7Ek=UxfUG8HzwQSQBsdCGcVCBzCMQQw@mail.gmail.com>
Hi,
I apologize for not replying to the last e-mail and replying to an older one instead, I seem to have lost the last couple. :(
Before I begin, let me say I downloaded the kernel sources only a few hours after your previous message, but the patch did not apply (I'm not sure why; I got a "corrupt patch" error).
I applied the changes manually.
Here's the dmesg I got:
[69237.004750] usbcore: deregistering interface driver usbhid
[69243.219600] hid: hid_debug is now used solely for parser and driver debugging.
[69243.219608] debugfs is now used for inspecting the device (report descriptor, reports)
[69350.013383] hid: hid_debug is now used solely for parser and driver debugging.
[69350.013390] debugfs is now used for inspecting the device (report descriptor, reports)
[69358.971680] usbcore: registered new interface driver usbhid
[69358.971692] usbhid: USB HID core driver
<Mouse receiver was plugged in at this point. Mouse was off.>
[69358.973309] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: Logitech-DJ:logi_dj_init
[69381.670037] usb 4-1: new full-speed USB device number 5 using ohci_hcd
[69381.892043] usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
[69381.892054] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[69381.892060] usb 4-1: Product: USB Receiver
[69381.892065] usb 4-1: Manufacturer: Logitech
[69381.898155] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 0
[69381.898311] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_probe called for ifnum 0
[69381.898321] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_probe: ignoring ifnum 0
[69381.898440] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 1
[69381.898537] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_probe called for ifnum 1
[69381.898546] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_probe: ignoring ifnum 1
[69381.898651] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/usbhid/hid-core.c: HID probe called for ifnum 2
[69381.898750] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_probe called for ifnum 2
[69381.904988] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x1001 wIndex=0x0200 wLength=1792
[69381.907044] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x1101 wIndex=0x0200 wLength=5120
[69381.908029] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x2001 wIndex=0x0200 wLength=3840
[69381.909028] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/usbhid/hid-core.c: submitting ctrl urb: Get_Report wValue=0x2101 wIndex=0x0200 wLength=8192
[69381.911438] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0001:10:1b.1-1/input2
[69381.918070] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69381.918124] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: delayedwork_callback
[69381.918135] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_recv_add_djhid_device: device list is empty
[69381.920069] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69381.920119] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: delayedwork_callback
[69381.920297] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_ll_parse
[69381.920308] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_ll_start
<Mouse was turned on at this point.>
[69381.920430] logitech-djdevice 0003:046D:C52B.0004: hidraw1: USB HID v1.11 Device [Logitech Unifying Device. Wireless PID:101a] on usb-0001:10:1b.1-1:1
[69395.230032] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.782013] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.782030] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.782039] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.806001] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.806016] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.806025] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.813994] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.814009] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.814017] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.821990] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.822004] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.822012] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.829989] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.830003] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.830012] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.837988] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.838002] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.838011] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.845989] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.846003] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.846011] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.853990] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.854004] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.854013] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
[69395.861992] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: logi_dj_raw_event, size:15
[69395.862006] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-core.c: undefined report_id 0 received
[69395.862014] /build/buildd-linux-2.6_3.3.4-1~experimental.1-powerpc-atUZTv/linux-2.6-3.3.4/debian/build/source_powerpc_none/drivers/hid/hid-logitech-dj.c: hid_input_report error
Here's the capture of the pairing event.
I found four devices in /sys/kernel/debug/hid/, so I tried each one until I found one that produced output upon pairing the mouse.
# mount -t debugfs debugfs /sys/kernel/debug
# ls /sys/kernel/debug/hid/
0003:046D:C52B.0001 0003:046D:C52B.0002 0003:046D:C52B.0003 0003:046D:C52B.0004
# modprobe -r hid_logitech_dj
# modprobe hid_logitech_dj
# cat /sys/kernel/debug/hid/0003\:046D\:C52B.0003/events > events.captured03
I tried all four, because I wasn't sure which one I should cat (/sys/kernel/debug/hid/0003\:046D\:C52B.000{1,2,3,4}/events).
The devices ending in 1,2 and 4 didn't show any output anything.
Reading from 0003:046D:C52B.0003 resulted in the following
<Mouse turned on at this point>
report (size 15) (numbered) = 20 01 42 00 00 00 00 00 00 00 00 00 00 00 00
<Mouse turned off at this point>
report (size 15) (numbered) = 20 01 42 01 00 00 00 00 00 00 00 00 00 00 00
<EOF>
The devices ending in 0003 and 0004 both showed plenty of output when moving the mouse around.
Just in case there any doubt; this was all on the powerpc machine.
Do you need me to rebuild the kernel with that patch and retry on amd64 as well?
Thanks,
Hugo
next prev parent reply other threads:[~2012-05-06 3:14 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20120503052000.GC15205@burratino>
[not found] ` <20120503052420.GD15205@burratino>
[not found] ` <4FA217B7.7070908@osvaldobarrera.com.ar>
2012-05-03 5:50 ` [bug?] [powerpc] hid_logitech_dj: Wireless mouse does not work in xorg or gpm Jonathan Nieder
[not found] ` <CAE7qMrqtmu+bYYYp43s7Ek=UxfUG8HzwQSQBsdCGcVCBzCMQQw@mail.gmail.com>
2012-05-03 13:08 ` Jonathan Nieder
2012-05-03 13:13 ` Jonathan Nieder
2012-05-04 2:40 ` Bug#671292: " Hugo Osvaldo Barrera
2012-05-04 7:41 ` Jonathan Nieder
2012-05-04 8:10 ` Hugo Osvaldo Barrera
2012-05-04 8:14 ` Hugo Osvaldo Barrera
2012-05-04 8:36 ` Jonathan Nieder
2012-05-04 10:16 ` Nestor Lopez Casado
2012-05-04 10:49 ` Jonathan Nieder
2012-05-06 3:14 ` Hugo Osvaldo Barrera [this message]
2012-05-06 5:55 ` Jonathan Nieder
2012-05-06 6:11 ` Hugo Osvaldo Barrera
2012-05-06 6:23 ` Jonathan Nieder
2012-05-11 5:06 ` Hugo Osvaldo Barrera
2012-05-11 6:38 ` Nestor Lopez Casado
2012-05-11 7:22 ` [PATCH/RFC] HID: logitech: read all 32 bits of report type bitfield Jonathan Nieder
2012-05-11 7:36 ` Nestor Lopez Casado
2012-05-11 7:43 ` Jonathan Nieder
2012-05-11 7:39 ` [PATCH/RFC v2] " Jonathan Nieder
2012-05-11 10:55 ` Jiri Kosina
2012-05-11 12:50 ` Hugo Osvaldo Barrera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120506031428.GA20044@hugoo.com.ar \
--to=hugo@osvaldobarrera.com.ar \
--cc=671292@bugs.debian.org \
--cc=benjamin.tissoires@enac.fr \
--cc=jrnieder@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=nlopezcasad@logitech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.