From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter
Date: Wed, 9 May 2012 11:00:34 +0200 [thread overview]
Message-ID: <201205091100.34314.marex@denx.de> (raw)
In-Reply-To: <1336552827.1540.165.camel@vkoul-udesk3>
Dear Vinod Koul,
> On Mon, 2012-05-07 at 22:23 +0800, Shawn Guo wrote:
> > Let macros dma_is_apbh and apbh_is_old take mxs_dma as parameter
> > to make the code easy to read.
> >
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >
> > drivers/dma/mxs-dma.c | 24 ++++++++++++------------
> > 1 files changed, 12 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c
> > index bd27818..e801fbf 100644
> > --- a/drivers/dma/mxs-dma.c
> > +++ b/drivers/dma/mxs-dma.c
> > @@ -38,10 +38,10 @@
> >
> > #define MXS_DMA_APBH 0
> > #define MXS_DMA_APBX 1
> >
> > -#define dma_is_apbh() (mxs_dma->dev_id == MXS_DMA_APBH)
> > +#define dma_is_apbh(mxs_dma) (mxs_dma->dev_id == MXS_DMA_APBH)
> >
> > #define APBH_VERSION_LATEST 3
> >
> > -#define apbh_is_old() (mxs_dma->version < APBH_VERSION_LATEST)
> > +#define apbh_is_old(mxs_dma) (mxs_dma->version < APBH_VERSION_LATEST)
> >
> > #define HW_APBHX_CTRL0 0x000
> > #define BM_APBH_CTRL0_APB_BURST8_EN (1 << 29)
> >
> > @@ -54,10 +54,10 @@
> >
> > #define HW_APBH_VERSION (cpu_is_mx23() ? 0x3f0 :
0x800)
> > #define HW_APBX_VERSION 0x800
> > #define BP_APBHX_VERSION_MAJOR 24
> >
> > -#define HW_APBHX_CHn_NXTCMDAR(n) \
> > - (((dma_is_apbh() && apbh_is_old()) ? 0x050 : 0x110) + (n) * 0x70)
> > -#define HW_APBHX_CHn_SEMA(n) \
> > - (((dma_is_apbh() && apbh_is_old()) ? 0x080 : 0x140) + (n) * 0x70)
> > +#define HW_APBHX_CHn_NXTCMDAR(d, n) \
> > + (((dma_is_apbh(d) && apbh_is_old(d)) ? 0x050 : 0x110) + (n) * 0x70)
> > +#define HW_APBHX_CHn_SEMA(d, n) \
> > + (((dma_is_apbh(d) && apbh_is_old(d)) ? 0x080 : 0x140) + (n) * 0x70)
>
> while at it, care to say what the above magic numbers mean. Isnt
> terrible clear to me.
Check the email above ;-) I think simple comment would be enough here, but
defining those would not hurt either.
>
> > /*
> >
> > * ccw bits definitions
> >
> > @@ -136,7 +136,7 @@ static void mxs_dma_reset_chan(struct mxs_dma_chan
> > *mxs_chan)
> >
> > struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma;
> > int chan_id = mxs_chan->chan.chan_id;
> >
> > - if (dma_is_apbh() && apbh_is_old())
> > + if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma))
> >
> > writel(1 << (chan_id + BP_APBH_CTRL0_RESET_CHANNEL),
> >
> > mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET);
> >
> > else
> >
> > @@ -151,10 +151,10 @@ static void mxs_dma_enable_chan(struct mxs_dma_chan
> > *mxs_chan)
> >
> > /* set cmd_addr up */
> > writel(mxs_chan->ccw_phys,
> >
> > - mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id));
> > + mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(mxs_dma, chan_id));
> >
> > /* write 1 to SEMA to kick off the channel */
> >
> > - writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id));
> > + writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(mxs_dma, chan_id));
> >
> > }
> >
> > static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan)
> >
> > @@ -168,7 +168,7 @@ static void mxs_dma_pause_chan(struct mxs_dma_chan
> > *mxs_chan)
> >
> > int chan_id = mxs_chan->chan.chan_id;
> >
> > /* freeze the channel */
> >
> > - if (dma_is_apbh() && apbh_is_old())
> > + if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma))
> >
> > writel(1 << chan_id,
> >
> > mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET);
> >
> > else
> >
> > @@ -184,7 +184,7 @@ static void mxs_dma_resume_chan(struct mxs_dma_chan
> > *mxs_chan)
> >
> > int chan_id = mxs_chan->chan.chan_id;
> >
> > /* unfreeze the channel */
> >
> > - if (dma_is_apbh() && apbh_is_old())
> > + if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma))
> >
> > writel(1 << chan_id,
> >
> > mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_CLR);
> >
> > else
> >
> > @@ -578,7 +578,7 @@ static int __init mxs_dma_init(struct mxs_dma_engine
> > *mxs_dma)
> >
> > BP_APBHX_VERSION_MAJOR;
> >
> > /* enable apbh burst */
> >
> > - if (dma_is_apbh()) {
> > + if (dma_is_apbh(mxs_dma)) {
> >
> > writel(BM_APBH_CTRL0_APB_BURST_EN,
> >
> > mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET);
> >
> > writel(BM_APBH_CTRL0_APB_BURST8_EN,
Best regards,
Marek Vasut
next prev parent reply other threads:[~2012-05-09 9:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 14:23 [PATCH 0/6] Add device tree support for mxs-dma Shawn Guo
2012-05-07 14:23 ` [PATCH 1/6] dma: mxs-dma: use global stmp_device functionality Shawn Guo
2012-05-07 23:34 ` Marek Vasut
2012-05-07 14:23 ` [PATCH 2/6] dma: mxs-dma: let dma_is_apbh and apbh_is_old take parameter Shawn Guo
2012-05-07 23:37 ` Marek Vasut
2012-05-08 14:03 ` Shawn Guo
2012-05-09 8:40 ` Vinod Koul
2012-05-09 9:00 ` Marek Vasut [this message]
2012-05-09 9:02 ` Vinod Koul
2012-05-09 9:16 ` Marek Vasut
2012-05-09 9:32 ` Shawn Guo
2012-05-07 14:23 ` [PATCH 3/6] dma: mxs-dma: make platform_device_id more generic Shawn Guo
2012-05-07 23:38 ` Marek Vasut
2012-05-07 14:23 ` [PATCH 4/6] dma: mxs-dma: add device tree probe support Shawn Guo
2012-05-07 23:39 ` Marek Vasut
2012-05-07 14:23 ` [PATCH 5/6] ARM: mxs: do not add dma device by default Shawn Guo
2012-05-07 23:40 ` Marek Vasut
2012-05-07 14:23 ` [PATCH 6/6] ARM: mxs: add mxs-dma dt support Shawn Guo
2012-05-07 23:40 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201205091100.34314.marex@denx.de \
--to=marex@denx.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.