From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: pull request: wireless-next 2012-05-14
Date: Mon, 14 May 2012 15:55:08 -0400 [thread overview]
Message-ID: <20120514195508.GC2428@tuxdriver.com> (raw)
commit 341352d13dae752610342923c53ebe461624ee2c
Dave,
This is essentially the same batch of updates for 3.5 that I originally
offered ~1.5 weeks ago. The difference is that I rebased the tree
both to drop the offending bluetooth-next pull and to base on top of
a more recent net-next in order to resolve the continuing NLA_PUT_*
issues affecting linux-next. I also took the opportunity to resolve
a little merge damage resulting from a recent pull of the net tree
into net-next.
Other highlights of this pull request include some HT enhancements
for mac80211, an expansion of the ethtool support for cfg80211-
and mac80211-based drivers, and some more iwlwifi refactoring.
Please let me know if there are problems!
John
---
The following changes since commit 9bb862beb6e5839e92f709d33fda07678f062f20:
Merge branch 'master' of git://1984.lsi.us.es/net-next (2012-05-08 14:40:21 -0400)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next.git master
Amitkumar Karwar (1):
mwifiex: fix static checker warnings
Anisse Astier (2):
rt2x00: debugfs support - allow a register to be empty
rt2x00: Add debugfs access for rfcsr register
Ashok Nagarajan (4):
mac80211: Advertise HT protection mode in IEs
mac80211: Implement HT mixed protection mode
mac80211: Allow nonHT/HT peering in mesh
{nl,cfg,mac}80211: Allow user to see/configure HT protection mode
Ben Greear (4):
cfg80211: Add framework to support ethtool stats.
mac80211: Support getting sta_info stats via ethtool.
mac80211: Framework to get wifi-driver stats via ethtool.
mac80211: Add more ethtools stats: survey, rates, etc
Ben Hutchings (2):
ipw2200: Fix order of device registration
ipw2100: Fix order of device registration
Dan Carpenter (1):
wireless: at76c50x: allocating too much data
Emmanuel Grumbach (3):
iwlwifi: use IWL_* instead of dev_printk when possible
iwlwifi: don't init trans->reg_lock from the op_mode
cfg80211: fix BSS comparison
Franky Lin (4):
brcmfmac: stop releasing sdio host in irq handler
brcmfmac: check bus state for status
brcmfmac: postpone interrupt register function
brcmfmac: add out of band interrupt support
John W. Linville (1):
iwlwifi: fix-up some merge damage from commit 0d6c4a2
Luis R. Rodriguez (1):
libertas: include sched.h on firmware.c
Meenakshi Venkataraman (1):
iwlwifi: use correct released ucode version
Rajkumar Manoharan (1):
mac80211: fix rate control update on 2040 bss change
Stanislav Yakovlev (1):
net/wireless: ipw2200: Fix WARN_ON occurring in wiphy_register called by ipw_pci_probe
Stanislaw Gruszka (1):
iwlwifi: add option to disable 5GHz band
Thomas Pedersen (2):
mac80211: insert mesh peer after init
mac80211: don't transmit 40MHz frames to 20MHz peer
WarheadsSE (1):
mwifiex: add support for SD8786 sdio
Wey-Yi Guy (11):
iwlwifi: remove unused macros
iwlwifi: add BT reduced tx power flag
iwlwifi: add checking for the condition to reduce tx power
iwlwifi: add reduced tx power threshold define
iwlwifi: small define change
iwlwifi: send reduce tx power info in command
iwlwifi: change kill mask based on reduce power state
iwlwifi: add loose coex lut
iwlwifi: modify #ifdef to avoid sparse complain
iwlwifi: remove the iwl_shared reference
iwlwifi: use 6000G2B for 6030 device series
drivers/net/wireless/at76c50x-usb.c | 4 +-
drivers/net/wireless/brcm80211/Kconfig | 9 +
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 97 ++++++++++-
.../net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 105 +++++++++++-
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 39 +++--
.../net/wireless/brcm80211/brcmfmac/sdio_host.h | 22 ++-
drivers/net/wireless/ipw2x00/ipw2100.c | 24 ++--
drivers/net/wireless/ipw2x00/ipw2200.c | 44 ++---
drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 153 ++++++++---------
drivers/net/wireless/iwlwifi/iwl-agn-rx.c | 3 +-
drivers/net/wireless/iwlwifi/iwl-agn.c | 38 ++--
drivers/net/wireless/iwlwifi/iwl-agn.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-commands.h | 21 ++-
drivers/net/wireless/iwlwifi/iwl-dev.h | 1 +
drivers/net/wireless/iwlwifi/iwl-drv.c | 12 +-
drivers/net/wireless/iwlwifi/iwl-modparams.h | 8 +-
drivers/net/wireless/iwlwifi/iwl-trans-pcie.c | 1 +
drivers/net/wireless/libertas/firmware.c | 1 +
drivers/net/wireless/mwifiex/Kconfig | 4 +-
drivers/net/wireless/mwifiex/fw.h | 3 +-
drivers/net/wireless/mwifiex/sdio.c | 7 +
drivers/net/wireless/mwifiex/sdio.h | 1 +
drivers/net/wireless/rt2x00/rt2800.h | 2 +
drivers/net/wireless/rt2x00/rt2800lib.c | 7 +
drivers/net/wireless/rt2x00/rt2x00debug.c | 82 +++++----
drivers/net/wireless/rt2x00/rt2x00debug.h | 1 +
include/linux/nl80211.h | 3 +
include/net/cfg80211.h | 18 ++
include/net/mac80211.h | 17 ++
net/mac80211/cfg.c | 182 ++++++++++++++++++++
net/mac80211/driver-ops.h | 37 ++++
net/mac80211/driver-trace.h | 15 ++
net/mac80211/ibss.c | 2 +-
net/mac80211/ieee80211_i.h | 3 +-
net/mac80211/mesh.c | 18 ++-
net/mac80211/mesh_plink.c | 96 ++++++++++-
net/mac80211/mlme.c | 2 +-
net/mac80211/sta_info.h | 1 +
net/mac80211/util.c | 9 +-
net/wireless/ethtool.c | 29 +++
net/wireless/mesh.c | 1 +
net/wireless/nl80211.c | 7 +-
net/wireless/scan.c | 6 +-
43 files changed, 893 insertions(+), 244 deletions(-)
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2012-05-14 20:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-14 19:55 John W. Linville [this message]
2012-05-14 22:12 ` pull request: wireless-next 2012-05-14 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120514195508.GC2428@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.