From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL][for 3.5] clk-next update
Date: Wed, 16 May 2012 20:52:46 +0000 [thread overview]
Message-ID: <201205162052.46513.arnd@arndb.de> (raw)
In-Reply-To: <CAOesGMh6w9gHwwn5MJ7MSkP9S-2RmjrwOtj77RfCMpBrEtupDg@mail.gmail.com>
On Wednesday 16 May 2012, Olof Johansson wrote:
>
> Are you planning on sending the last couple of fixes out before
> wrapping things up? If I haven't seen a request go out by tomorrow
> I'll do it, I suppose.
I was planning to, but it's getting rather late here in Germany
so maybe you can take care of this, too.
I've just fixed up two of the next/* branches that caused build regressions
(one was my fault, the other one came from samsung/board2) and started
building the defconfigs for linux-next, which looks rather bad, so I probably
won't spend much time trying to fix them up, see below for how far I got.
Arnd
----
acs5k_defconfig
acs5k_defconfig
Generating include/generated/mach-types.h
/home/arnd/linux-arm/arch/arm/mm/dma-mapping.c: In function 'arm_dma_alloc':
/home/arnd/linux-arm/arch/arm/mm/dma-mapping.c:675:15: error: 'page' may be used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make[2]: *** [arch/arm/mm/dma-mapping.o] Error 1
make[1]: *** [arch/arm/mm] Error 2
make[1]: *** Waiting for unfinished jobs....
/home/arnd/linux-arm/kernel/user.c:30:4: error: this decimal constant is unsigned only in ISO C90 [-Werror]
/home/arnd/linux-arm/kernel/user.c:38:4: error: this decimal constant is unsigned only in ISO C90 [-Werror]
cc1: all warnings being treated as errors
acs5k_tiny_defconfig
afeb9260_defconfig
ag5evm_defconfig
/home/arnd/linux-arm/arch/arm/mach-shmobile/clock-sh73a0.c: In function 'sh73a0_clock_init':
/home/arnd/linux-arm/arch/arm/mach-shmobile/clock-sh73a0.c:615:3: error: 'sh_clk_mstp32_register' is deprecated (declared at /home/arnd/linux-arm/include/linux/sh_clk.h:138) [-Werror=deprecated-declarations]
cc1: all warnings being treated as errors
make[2]: *** [arch/arm/mach-shmobile/clock-sh73a0.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/mach-shmobile] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2
am200epdkit_defconfig
ap4evb_defconfig
/home/arnd/linux-arm/arch/arm/mach-shmobile/clock-sh7372.c: In function 'sh7372_clock_init':
/home/arnd/linux-arm/arch/arm/mach-shmobile/clock-sh7372.c:707:3: error: 'sh_clk_mstp32_register' is deprecated (declared at /home/arnd/linux-arm/include/linux/sh_clk.h:138) [-Werror=deprecated-declarations]
cc1: all warnings being treated as errors
make[2]: *** [arch/arm/mach-shmobile/clock-sh7372.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [arch/arm/mach-shmobile] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2
armadillo800eva_defconfig
assabet_defconfig
at91_dt_defconfig
/home/arnd/linux-arm/drivers/usb/gadget/at91_udc.c: In function 'at91_ep_enable':
/home/arnd/linux-arm/drivers/usb/gadget/at91_udc.c:478:18: error: 'struct at91_ep' has no member named 'desc'
make[4]: *** [drivers/usb/gadget/at91_udc.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [drivers/usb/gadget] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [drivers/usb] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [drivers] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2
at91rm9200_defconfig
at91sam9260_defconfig
at91sam9261_defconfig
at91sam9263_defconfig
/home/arnd/linux-arm/fs/fuse/control.c: In function 'fuse_conn_congestion_threshold_write':
/home/arnd/linux-arm/fs/fuse/control.c:165:29: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]
/home/arnd/linux-arm/fs/fuse/control.c: In function 'fuse_conn_max_background_write':
/home/arnd/linux-arm/fs/fuse/control.c:128:23: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make[3]: *** [fs/fuse/control.o] Error 1
make[2]: *** [fs/fuse] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [fs] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2
at91sam9g20_defconfig
at91sam9g45_defconfig
at91sam9rl_defconfig
at91x40_defconfig
badge4_defconfig
bcmring_defconfig
bcmring_defconfig.rej
bonito_defconfig
cam60_defconfig
next prev parent reply other threads:[~2012-05-16 20:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-16 6:35 [GIT PULL][for 3.5] clk-next update Mike Turquette
2012-05-16 18:39 ` Arnd Bergmann
2012-05-16 20:14 ` Olof Johansson
2012-05-16 20:52 ` Arnd Bergmann [this message]
2012-05-16 21:17 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201205162052.46513.arnd@arndb.de \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.