From: Denys Dmytriyenko <denis@denix.org>
To: Koen Kooi <koen@dominion.thruhere.net>
Cc: meta-ti@yoctoproject.org, denys@ti.com
Subject: Re: [PATCH 1/2] linux-ti33x-psp 3.2: demote cpsw PHY message to INFO
Date: Thu, 17 May 2012 14:32:22 -0400 [thread overview]
Message-ID: <20120517183222.GK6829@denix.org> (raw)
In-Reply-To: <1337249227-9151-1-git-send-email-koen@dominion.thruhere.net>
On Thu, May 17, 2012 at 12:07:06PM +0200, Koen Kooi wrote:
> This keeps them from appearing on the screen during quiet boots. They are still being reported, so no info is lost.
>
> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> ---
> ...pws-phy_device-demote-PHY-message-to-INFO.patch | 51 ++++++++++++++++++++
> recipes-kernel/linux/linux-ti33x-psp_3.2.bb | 3 +-
> 2 files changed, 53 insertions(+), 1 deletion(-)
> create mode 100644 recipes-kernel/linux/linux-ti33x-psp-3.2/beaglebone/0045-cpws-phy_device-demote-PHY-message-to-INFO.patch
>
> diff --git a/recipes-kernel/linux/linux-ti33x-psp-3.2/beaglebone/0045-cpws-phy_device-demote-PHY-message-to-INFO.patch b/recipes-kernel/linux/linux-ti33x-psp-3.2/beaglebone/0045-cpws-phy_device-demote-PHY-message-to-INFO.patch
> new file mode 100644
> index 0000000..2aed646
> --- /dev/null
> +++ b/recipes-kernel/linux/linux-ti33x-psp-3.2/beaglebone/0045-cpws-phy_device-demote-PHY-message-to-INFO.patch
> @@ -0,0 +1,51 @@
> +From 04924dfd0335b8adca0e7783112827df30e70a5f Mon Sep 17 00:00:00 2001
> +From: Koen Kooi <koen@dominion.thruhere.net>
> +Date: Thu, 17 May 2012 10:59:18 +0200
> +Subject: [PATCH] cpsw,phy_device: demote PHY message to INFO
> +
> +This keeps them from appearing on the screen when booting with 'quiet'
> +
> +Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
> +---
> + drivers/net/ethernet/ti/cpsw.c | 2 +-
> + drivers/net/phy/phy_device.c | 4 ++--
> + 2 files changed, 3 insertions(+), 3 deletions(-)
> +
> +diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
> +index 86fe57d..d10996d 100644
> +--- a/drivers/net/ethernet/ti/cpsw.c
> ++++ b/drivers/net/ethernet/ti/cpsw.c
> +@@ -638,7 +638,7 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
> + slave->data->phy_id, slave->slave_num);
> + slave->phy = NULL;
> + } else {
> +- printk(KERN_ERR"\nCPSW phy found : id is : 0x%x\n",
> ++ printk(KERN_INFO"\nCPSW phy found : id is : 0x%x\n",
> + slave->phy->phy_id);
> + cpsw_set_phy_config(priv, slave->phy);
> + phy_start(slave->phy);
> +diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
> +index 83a5a5a..8b84789 100644
> +--- a/drivers/net/phy/phy_device.c
> ++++ b/drivers/net/phy/phy_device.c
> +@@ -380,7 +380,7 @@ struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
> + * PHY with the requested name */
> + d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
> + if (!d) {
> +- pr_err("PHY %s not found\n", bus_id);
> ++ pr_info("PHY %s not found\n", bus_id);
> + return ERR_PTR(-ENODEV);
> + }
> + phydev = to_phy_device(d);
> +@@ -503,7 +503,7 @@ struct phy_device *phy_attach(struct net_device *dev,
> + * PHY with the requested name */
> + d = bus_find_device_by_name(bus, NULL, bus_id);
> + if (!d) {
> +- pr_err("PHY %s not found\n", bus_id);
> ++ pr_info("PHY %s not found\n", bus_id);
> + return ERR_PTR(-ENODEV);
> + }
> + phydev = to_phy_device(d);
> +--
> +1.7.7.6
> +
> diff --git a/recipes-kernel/linux/linux-ti33x-psp_3.2.bb b/recipes-kernel/linux/linux-ti33x-psp_3.2.bb
> index 6c5056a..0fe3d4f 100644
> --- a/recipes-kernel/linux/linux-ti33x-psp_3.2.bb
> +++ b/recipes-kernel/linux/linux-ti33x-psp_3.2.bb
> @@ -12,7 +12,7 @@ MULTI_CONFIG_BASE_SUFFIX = ""
>
> BRANCH = "v3.2-staging"
> SRCREV = "720e07b4c1f687b61b147b31c698cb6816d72f01"
> -MACHINE_KERNEL_PR_append = "k+gitr${SRCREV}"
> +MACHINE_KERNEL_PR_append = "l+gitr${SRCREV}"
>
> COMPATIBLE_MACHINE = "(ti33x)"
>
> @@ -970,4 +970,5 @@ PATCHES_OVER_PSP = " \
> file://beaglebone/0043-st7735fb-Working-WIP-changes-to-make-DMA-safe-and-ad.patch \
> file://beaglebone/0044-omap-hwmod-silence-st_shift-error.patch \
This 0044 patch seems to be missing - did you forget to submit it?
--
Denys
> file://beaglebone/0001-arm-boot-compressed-default-asm-arch-to-armv7-a.patch \
> + file://beaglebone/0045-cpws-phy_device-demote-PHY-message-to-INFO.patch \
> "
> --
> 1.7.10
>
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
>
next prev parent reply other threads:[~2012-05-17 18:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-17 10:07 [PATCH 1/2] linux-ti33x-psp 3.2: demote cpsw PHY message to INFO Koen Kooi
2012-05-17 10:07 ` [PATCH 2/2] linux-ti33x-psp 3.2: correct PV for non-tipsp distros Koen Kooi
2012-05-17 18:28 ` Denys Dmytriyenko
2012-05-17 19:31 ` Koen Kooi
2012-05-17 18:32 ` Denys Dmytriyenko [this message]
2012-05-17 19:30 ` [PATCH 1/2] linux-ti33x-psp 3.2: demote cpsw PHY message to INFO Koen Kooi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120517183222.GK6829@denix.org \
--to=denis@denix.org \
--cc=denys@ti.com \
--cc=koen@dominion.thruhere.net \
--cc=meta-ti@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.