From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sun, 20 May 2012 21:09:59 +0200 Subject: [U-Boot] silent console with nand In-Reply-To: <5D308BD40154E4439D82454FE483A50206A4F026@EVS4.nam.ci.root> References: <5D308BD40154E4439D82454FE483A50206A4F026@EVS4.nam.ci.root> Message-ID: <20120520190959.EEB3E20648D@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear "Bishop, Mark", In message <5D308BD40154E4439D82454FE483A50206A4F026@EVS4.nam.ci.root> you wrote: > Is it possible to have a silent console with the 'silent' environment > variable if the environment is stored in NAND? The storage location of the environment should have nothing to do with the functionality. > Essentially both: > #define CONFIG_SILENT_CONSOLE > #define CONFIG_ENV_IS_IN_NAND > > are defined, but I am not seeing a dark console with silent=1. There may be problems with your current implementation, like the environment not being available soon enough. You can test this by changing the console bausrate using setenv / saveenv. Cn you still see all boot messages? > I've seen the messages concerning the environment stored in SPI Flash > and was probably thinking that it applies to NAND as well. I'm just Again - the storage location has nothign to do with functionality; but there are some broken configurations out there that should be fixed. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de A modem is a baudy house.