From: H Hartley Sweeten <hartleys@visionengravers.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>, <abbotti@mev.co.uk>,
<fmhess@users.sourceforge.net>, <gregkh@linuxfoundation.org>
Subject: [PATCH] staging: comedi: remove this_board macro in the pcl812 driver
Date: Tue, 22 May 2012 17:09:03 -0700 [thread overview]
Message-ID: <201205221709.04219.hartleys@visionengravers.com> (raw)
The 'this_board' macro depends on having a local variable with
a magic name. The CodingStyle document suggests not doing this
to avoid confusion. Remove the macro and use the comedi_board()
inline helper to get the dev->board_ptr information.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index 51f4ca9..28780ed 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -336,8 +336,6 @@ struct pcl812_board {
unsigned char haveMPC508; /* 1=board use MPC508A multiplexor */
};
-#define this_board ((const struct pcl812_board *)dev->board_ptr)
-
struct pcl812_private {
unsigned char valid; /* =1 device is OK */
@@ -560,6 +558,7 @@ static void pcl812_cmdtest_out(int e, struct comedi_cmd *cmd)
static int pcl812_ai_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
+ const struct pcl812_board *board = comedi_board(dev);
int err = 0;
int tmp, divisor1, divisor2;
@@ -666,8 +665,8 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
}
if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < this_board->ai_ns_min) {
- cmd->convert_arg = this_board->ai_ns_min;
+ if (cmd->convert_arg < board->ai_ns_min) {
+ cmd->convert_arg = board->ai_ns_min;
err++;
}
} else { /* TRIG_EXT */
@@ -682,7 +681,7 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
err++;
}
if (cmd->chanlist_len > MAX_CHANLIST_LEN) {
- cmd->chanlist_len = this_board->n_aichan;
+ cmd->chanlist_len = board->n_aichan;
err++;
}
if (cmd->scan_end_arg != cmd->chanlist_len) {
@@ -715,11 +714,11 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
if (cmd->convert_src == TRIG_TIMER) {
tmp = cmd->convert_arg;
- i8253_cascade_ns_to_timer(this_board->i8254_osc_base, &divisor1,
+ i8253_cascade_ns_to_timer(board->i8254_osc_base, &divisor1,
&divisor2, &cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
- if (cmd->convert_arg < this_board->ai_ns_min)
- cmd->convert_arg = this_board->ai_ns_min;
+ if (cmd->convert_arg < board->ai_ns_min)
+ cmd->convert_arg = board->ai_ns_min;
if (tmp != cmd->convert_arg)
err++;
}
@@ -741,6 +740,7 @@ static int pcl812_ai_cmdtest(struct comedi_device *dev,
*/
static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
+ const struct pcl812_board *board = comedi_board(dev);
unsigned int divisor1 = 0, divisor2 = 0, i, dma_flags, bytes;
struct comedi_cmd *cmd = &s->async->cmd;
@@ -767,9 +767,9 @@ static int pcl812_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
return -EINVAL;
if (cmd->convert_src == TRIG_TIMER) {
- if (cmd->convert_arg < this_board->ai_ns_min)
- cmd->convert_arg = this_board->ai_ns_min;
- i8253_cascade_ns_to_timer(this_board->i8254_osc_base,
+ if (cmd->convert_arg < board->ai_ns_min)
+ cmd->convert_arg = board->ai_ns_min;
+ i8253_cascade_ns_to_timer(board->i8254_osc_base,
&divisor1, &divisor2,
&cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
@@ -1192,6 +1192,7 @@ static void start_pacer(struct comedi_device *dev, int mode,
*/
static void free_resources(struct comedi_device *dev)
{
+ const struct pcl812_board *board = comedi_board(dev);
if (dev->private) {
if (devpriv->dmabuf[0])
@@ -1204,7 +1205,7 @@ static void free_resources(struct comedi_device *dev)
if (dev->irq)
free_irq(dev->irq, dev);
if (dev->iobase)
- release_region(dev->iobase, this_board->io_range);
+ release_region(dev->iobase, board->io_range);
}
/*
@@ -1234,6 +1235,8 @@ static int pcl812_ai_cancel(struct comedi_device *dev,
*/
static void pcl812_reset(struct comedi_device *dev)
{
+ const struct pcl812_board *board = comedi_board(dev);
+
#ifdef PCL812_EXTDEBUG
printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_reset(...)\n");
#endif
@@ -1242,7 +1245,7 @@ static void pcl812_reset(struct comedi_device *dev)
devpriv->old_chan_reg = -1; /* invalidate chain/gain memory */
devpriv->old_gain_reg = -1;
- switch (this_board->board_type) {
+ switch (board->board_type) {
case boardPCL812PG:
case boardPCL812:
case boardACL8112:
@@ -1273,6 +1276,7 @@ static void pcl812_reset(struct comedi_device *dev)
static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
+ const struct pcl812_board *board = comedi_board(dev);
int ret, subdev;
unsigned long iobase;
unsigned int irq;
@@ -1283,9 +1287,9 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
iobase = it->options[0];
printk(KERN_INFO "comedi%d: pcl812: board=%s, ioport=0x%03lx",
- dev->minor, this_board->name, iobase);
+ dev->minor, board->name, iobase);
- if (!request_region(iobase, this_board->io_range, "pcl812")) {
+ if (!request_region(iobase, board->io_range, "pcl812")) {
printk("I/O port conflict\n");
return -EIO;
}
@@ -1297,13 +1301,13 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return ret; /* Can't alloc mem */
}
- dev->board_name = this_board->name;
+ dev->board_name = board->name;
irq = 0;
- if (this_board->IRQbits != 0) { /* board support IRQ */
+ if (board->IRQbits != 0) { /* board support IRQ */
irq = it->options[1];
if (irq) { /* we want to use IRQ */
- if (((1 << irq) & this_board->IRQbits) == 0) {
+ if (((1 << irq) & board->IRQbits) == 0) {
printk
(", IRQ %u is out of allowed range, "
"DISABLING IT", irq);
@@ -1328,9 +1332,9 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
devpriv->dma = dma;
if (!dev->irq)
goto no_dma; /* if we haven't IRQ, we can't use DMA */
- if (this_board->DMAbits != 0) { /* board support DMA */
+ if (board->DMAbits != 0) { /* board support DMA */
dma = it->options[2];
- if (((1 << dma) & this_board->DMAbits) == 0) {
+ if (((1 << dma) & board->DMAbits) == 0) {
printk(", DMA is out of allowed range, FAIL!\n");
return -EINVAL; /* Bad DMA */
}
@@ -1369,13 +1373,13 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it)
no_dma:
n_subdevices = 0;
- if (this_board->n_aichan > 0)
+ if (board->n_aichan > 0)
n_subdevices++;
- if (this_board->n_aochan > 0)
+ if (board->n_aochan > 0)
n_subdevices++;
- if (this_board->n_dichan > 0)
+ if (board->n_dichan > 0)
n_subdevices++;
- if (this_board->n_dochan > 0)
+ if (board->n_dochan > 0)
n_subdevices++;
ret = alloc_subdevices(dev, n_subdevices);
@@ -1387,46 +1391,46 @@ no_dma:
subdev = 0;
/* analog input */
- if (this_board->n_aichan > 0) {
+ if (board->n_aichan > 0) {
s = dev->subdevices + subdev;
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE;
- switch (this_board->board_type) {
+ switch (board->board_type) {
case boardA821:
if (it->options[2] == 1) {
- s->n_chan = this_board->n_aichan_diff;
+ s->n_chan = board->n_aichan_diff;
s->subdev_flags |= SDF_DIFF;
devpriv->use_diff = 1;
} else {
- s->n_chan = this_board->n_aichan;
+ s->n_chan = board->n_aichan;
s->subdev_flags |= SDF_GROUND;
}
break;
case boardACL8112:
case boardACL8216:
if (it->options[4] == 1) {
- s->n_chan = this_board->n_aichan_diff;
+ s->n_chan = board->n_aichan_diff;
s->subdev_flags |= SDF_DIFF;
devpriv->use_diff = 1;
} else {
- s->n_chan = this_board->n_aichan;
+ s->n_chan = board->n_aichan;
s->subdev_flags |= SDF_GROUND;
}
break;
default:
- s->n_chan = this_board->n_aichan;
+ s->n_chan = board->n_aichan;
s->subdev_flags |= SDF_GROUND;
break;
}
- s->maxdata = this_board->ai_maxdata;
+ s->maxdata = board->ai_maxdata;
s->len_chanlist = MAX_CHANLIST_LEN;
- s->range_table = this_board->rangelist_ai;
- if (this_board->board_type == boardACL8216)
+ s->range_table = board->rangelist_ai;
+ if (board->board_type == boardACL8216)
s->insn_read = acl8216_ai_insn_read;
else
s->insn_read = pcl812_ai_insn_read;
- devpriv->use_MPC = this_board->haveMPC508;
+ devpriv->use_MPC = board->haveMPC508;
s->cancel = pcl812_ai_cancel;
if (dev->irq) {
dev->read_subdev = s;
@@ -1435,7 +1439,7 @@ no_dma:
s->do_cmd = pcl812_ai_cmd;
s->poll = pcl812_ai_poll;
}
- switch (this_board->board_type) {
+ switch (board->board_type) {
case boardPCL812PG:
if (it->options[4] == 1)
s->range_table = &range_pcl812pg2_ai;
@@ -1529,17 +1533,17 @@ no_dma:
}
/* analog output */
- if (this_board->n_aochan > 0) {
+ if (board->n_aochan > 0) {
s = dev->subdevices + subdev;
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITABLE | SDF_GROUND;
- s->n_chan = this_board->n_aochan;
+ s->n_chan = board->n_aochan;
s->maxdata = 0xfff;
s->len_chanlist = 1;
- s->range_table = this_board->rangelist_ao;
+ s->range_table = board->rangelist_ao;
s->insn_read = pcl812_ao_insn_read;
s->insn_write = pcl812_ao_insn_write;
- switch (this_board->board_type) {
+ switch (board->board_type) {
case boardA821:
if (it->options[3] == 1)
s->range_table = &range_unipolar10;
@@ -1558,32 +1562,32 @@ no_dma:
}
/* digital input */
- if (this_board->n_dichan > 0) {
+ if (board->n_dichan > 0) {
s = dev->subdevices + subdev;
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
- s->n_chan = this_board->n_dichan;
+ s->n_chan = board->n_dichan;
s->maxdata = 1;
- s->len_chanlist = this_board->n_dichan;
+ s->len_chanlist = board->n_dichan;
s->range_table = &range_digital;
s->insn_bits = pcl812_di_insn_bits;
subdev++;
}
/* digital output */
- if (this_board->n_dochan > 0) {
+ if (board->n_dochan > 0) {
s = dev->subdevices + subdev;
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITABLE;
- s->n_chan = this_board->n_dochan;
+ s->n_chan = board->n_dochan;
s->maxdata = 1;
- s->len_chanlist = this_board->n_dochan;
+ s->len_chanlist = board->n_dochan;
s->range_table = &range_digital;
s->insn_bits = pcl812_do_insn_bits;
subdev++;
}
- switch (this_board->board_type) {
+ switch (board->board_type) {
case boardACL8216:
devpriv->ai_is16b = 1;
case boardPCL812PG:
reply other threads:[~2012-05-23 0:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201205221709.04219.hartleys@visionengravers.com \
--to=hartleys@visionengravers.com \
--cc=abbotti@mev.co.uk \
--cc=devel@driverdev.osuosl.org \
--cc=fmhess@users.sourceforge.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.