All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH] hwmon: (coretemp) Improve support of recent Atom CPU models
Date: Wed, 30 May 2012 15:22:03 +0000	[thread overview]
Message-ID: <20120530152203.GA15570@ericsson.com> (raw)
In-Reply-To: <20120530132956.6161d552@endymion.delvare>

On Wed, May 30, 2012 at 07:29:56AM -0400, Jean Delvare wrote:
> Document the new Atom series (Tunnel Creek and Medfield) as being
> supported, and list TjMax for the Atom E600 series.
> 
> Also enable the Atom tjmax heuristic for these Atom CPU models.
> 
> Signed-off-by: Jean Delvare <khali@linux-fr.org>
> Cc: Alexander Stein <alexander.stein@systec-electronic.com>
> Cc: Fenghua Yu <fenghua.yu@intel.com>
> Cc: Guenter Roeck <guenter.roeck@ericsson.com>
> Cc: "R, Durgadoss" <durgadoss.r@intel.com>

Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>

Minor comment below. Ignore it at your pleasure - I am not really sure if this is one
we want to follow unless it is made non-strict.

Do you want me to take the patch ?

Thanks,
Guenter

> ---
> This patch has been sitting in my tree for months now for no good
> reason, it's about time to push it upstream. Testers are welcome.
> 
>  Documentation/hwmon/coretemp |    5 ++++-
>  drivers/hwmon/coretemp.c     |    3 ++-
>  2 files changed, 6 insertions(+), 2 deletions(-)
> 
> --- linux-3.1-rc4.orig/Documentation/hwmon/coretemp	2011-09-28 12:45:58.000000000 +0200
> +++ linux-3.1-rc4/Documentation/hwmon/coretemp	2011-09-28 16:18:18.000000000 +0200
> @@ -6,7 +6,8 @@ Supported chips:
>      Prefix: 'coretemp'
>      CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
>                                0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
> -                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
> +                              0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
> +                              0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom)
>      Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
>                 Volume 3A: System Programming Guide
>                 http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
> @@ -85,6 +86,8 @@ Process		Processor					TjMax(C)
>  		N475/470/455/450				100
>  		N280/270					90
>  		330/230						125
> +		E680/660/640/620				90
> +		E680T/660T/640T/620T				110
>  
>  45nm		Core2 Processors
>  		Solo ULV SU3500/3300				100
> --- linux-3.1-rc4.orig/drivers/hwmon/coretemp.c	2011-09-28 14:22:44.000000000 +0200
> +++ linux-3.1-rc4/drivers/hwmon/coretemp.c	2011-09-28 16:23:29.000000000 +0200
> @@ -210,7 +210,8 @@ static int adjust_tjmax(struct cpuinfo_x
>  
>  	/* Atom CPUs */
>  
> -	if (c->x86_model = 0x1c) {
> +	if (c->x86_model = 0x1c || c->x86_model = 0x26
> +	    || c->x86_model = 0x27) {

Upstream seems to have decided about logical continuations.

groeck@groeck-laptop:~/src/linux-staging$ scripts/checkpatch.pl --strict patches/coretemp
CHECK: Logical continuations should be on the previous line
#63: FILE: drivers/hwmon/coretemp.c:214:
+       if (c->x86_model = 0x1c || c->x86_model = 0x26
+           || c->x86_model = 0x27) {

>  		usemsr_ee = 0;
>  
>  		host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
> 
> 
> -- 
> Jean Delvare

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

  reply	other threads:[~2012-05-30 15:22 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-30 11:29 [lm-sensors] [PATCH] hwmon: (coretemp) Improve support of recent Atom CPU models Jean Delvare
2012-05-30 15:22 ` Guenter Roeck [this message]
2012-05-30 15:55 ` Alexander Stein
2012-05-30 16:02 ` Jean Delvare
2012-05-30 18:17 ` Jean Delvare
2012-05-31  2:22 ` Guenter Roeck
2012-05-31  6:33 ` Alexander Stein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120530152203.GA15570@ericsson.com \
    --to=guenter.roeck@ericsson.com \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.