All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: khoa@us.ibm.com, kvm@vger.kernel.org,
	virtualization@lists.linux-foundation.org
Subject: Re: [PATCH v3] virtio_blk: unlock vblk->lock during kick
Date: Mon, 4 Jun 2012 14:11:35 +0300	[thread overview]
Message-ID: <20120604111134.GA28673@redhat.com> (raw)
In-Reply-To: <1338541986-8083-1-git-send-email-stefanha@linux.vnet.ibm.com>

On Fri, Jun 01, 2012 at 10:13:06AM +0100, Stefan Hajnoczi wrote:
> Holding the vblk->lock across kick causes poor scalability in SMP
> guests.  If one CPU is doing virtqueue kick and another CPU touches the
> vblk->lock it will have to spin until virtqueue kick completes.
> 
> This patch reduces system% CPU utilization in SMP guests that are
> running multithreaded I/O-bound workloads.  The improvements are small
> but show as iops and SMP are increased.
> 
> Khoa Huynh <khoa@us.ibm.com> provided initial performance data that
> indicates this optimization is worthwhile at high iops.
> 
> Asias He <asias@redhat.com> reports the following fio results:
> 
> Host: Linux 3.4.0+ #302 SMP x86_64 GNU/Linux
> Guest: same as host kernel
> 
> Average 3 runs:
> with locked kick
> read    iops=119907.50 bw=59954.00 runt=35018.50 io=2048.00
> write   iops=217187.00 bw=108594.00 runt=19312.00 io=2048.00
> read    iops=33948.00 bw=16974.50 runt=186820.50 io=3095.70
> write   iops=35014.00 bw=17507.50 runt=181151.00 io=3095.70
> clat (usec)     max=3484.10 avg=121085.38 stdev=174416.11 min=0.00
> clat (usec)     max=3438.30 avg=59863.35 stdev=116607.69 min=0.00
> clat (usec)     max=3745.65 avg=454501.30 stdev=332699.00 min=0.00
> clat (usec)     max=4089.75 avg=442374.99 stdev=304874.62 min=0.00
> cpu     sys=615.12 majf=24080.50 ctx=64253616.50 usr=68.08 minf=17907363.00
> cpu     sys=1235.95 majf=23389.00 ctx=59788148.00 usr=98.34 minf=20020008.50
> cpu     sys=764.96 majf=28414.00 ctx=848279274.00 usr=36.39 minf=19737254.00
> cpu     sys=714.13 majf=21853.50 ctx=854608972.00 usr=33.56 minf=18256760.50
> 
> with unlocked kick
> read    iops=118559.00 bw=59279.66 runt=35400.66 io=2048.00
> write   iops=227560.00 bw=113780.33 runt=18440.00 io=2048.00
> read    iops=34567.66 bw=17284.00 runt=183497.33 io=3095.70
> write   iops=34589.33 bw=17295.00 runt=183355.00 io=3095.70
> clat (usec)     max=3485.56 avg=121989.58 stdev=197355.15 min=0.00
> clat (usec)     max=3222.33 avg=57784.11 stdev=141002.89 min=0.00
> clat (usec)     max=4060.93 avg=447098.65 stdev=315734.33 min=0.00
> clat (usec)     max=3656.30 avg=447281.70 stdev=314051.33 min=0.00
> cpu     sys=683.78 majf=24501.33 ctx=64435364.66 usr=68.91 minf=17907893.33
> cpu     sys=1218.24 majf=25000.33 ctx=60451475.00 usr=101.04 minf=19757720.00
> cpu     sys=740.39 majf=24809.00 ctx=845290443.66 usr=37.25 minf=19349958.33
> cpu     sys=723.63 majf=27597.33 ctx=850199927.33 usr=35.35 minf=19092343.00
> 
> FIO config file:
> 
> [global]
> exec_prerun="echo 3 > /proc/sys/vm/drop_caches"
> group_reporting
> norandommap
> ioscheduler=noop
> thread
> bs=512
> size=4MB
> direct=1
> filename=/dev/vdb
> numjobs=256
> ioengine=aio
> iodepth=64
> loops=3
> 
> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
> ---
> Other block drivers (cciss, rbd, nbd) use spin_unlock_irq() so I followed that.
> To me this seems wrong: blk_run_queue() uses spin_lock_irqsave() but we enable
> irqs with spin_unlock_irq().  If the caller of blk_run_queue() had irqs
> disabled and we enable them again this could be a problem, right?  Can someone
> more familiar with kernel locking comment?
> 
>  drivers/block/virtio_blk.c |   10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> index 774c31d..d674977 100644
> --- a/drivers/block/virtio_blk.c
> +++ b/drivers/block/virtio_blk.c
> @@ -199,8 +199,14 @@ static void do_virtblk_request(struct request_queue *q)
>  		issued++;
>  	}
>  
> -	if (issued)
> -		virtqueue_kick(vblk->vq);
> +	if (!issued)
> +		return;
> +
> +	if (virtqueue_kick_prepare(vblk->vq)) {
> +		spin_unlock_irq(vblk->disk->queue->queue_lock);
> +		virtqueue_notify(vblk->vq);

If blk_done runs and completes the request at this point,
can hot unplug then remove the queue?
If yes will we get a use after free?

> +		spin_lock_irq(vblk->disk->queue->queue_lock);
> +	}
>  }
>  
>  /* return id (s/n) string for *disk to *id_str
> -- 
> 1.7.10
> 
> _______________________________________________
> Virtualization mailing list
> Virtualization@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization

  parent reply	other threads:[~2012-06-04 11:11 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-01  9:13 [PATCH v3] virtio_blk: unlock vblk->lock during kick Stefan Hajnoczi
2012-06-01  9:13 ` Stefan Hajnoczi
2012-06-04  8:33 ` Asias He
2012-06-04 11:11 ` Michael S. Tsirkin [this message]
2012-06-06 15:25   ` Stefan Hajnoczi
2012-06-06 15:25   ` Stefan Hajnoczi
2012-06-08 13:51     ` Michael S. Tsirkin
2012-06-04 11:15 ` Michael S. Tsirkin
2012-06-06  9:03   ` Stefan Hajnoczi
2012-06-04 21:13 ` Khoa Huynh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120604111134.GA28673@redhat.com \
    --to=mst@redhat.com \
    --cc=khoa@us.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=stefanha@linux.vnet.ibm.com \
    --cc=virtualization@lists.linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.