From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>,
Borislav Petkov <borislav.petkov@amd.com>,
Chen Gong <gong.chen@linux.intel.com>,
x86@kernel.org, Peter Zijlstra <peterz@infradead.org>
Subject: [patch 6/6] x86: mce: Add cmci poll mode
Date: Wed, 06 Jun 2012 21:27:15 -0000 [thread overview]
Message-ID: <20120606212334.833261657@linutronix.de> (raw)
In-Reply-To: 20120606211746.693649684@linutronix.de
[-- Attachment #1: x86-mce-cmci-poll-mode.patch --]
[-- Type: text/plain, Size: 7321 bytes --]
Still waits for explanation :)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/cpu/mcheck/mce-internal.h | 10 +++
arch/x86/kernel/cpu/mcheck/mce.c | 46 +++++++++++++--
arch/x86/kernel/cpu/mcheck/mce_intel.c | 88 +++++++++++++++++++++++++++++-
3 files changed, 137 insertions(+), 7 deletions(-)
Index: tip/arch/x86/kernel/cpu/mcheck/mce-internal.h
===================================================================
--- tip.orig/arch/x86/kernel/cpu/mcheck/mce-internal.h
+++ tip/arch/x86/kernel/cpu/mcheck/mce-internal.h
@@ -28,6 +28,16 @@ extern int mce_ser;
extern struct mce_bank *mce_banks;
+#ifdef CONFIG_X86_MCE_INTEL
+unsigned long mce_intel_adjust_timer(unsigned long interval);
+void mce_intel_cmci_poll(void);
+#else
+# define mce_intel_adjust_timer mce_adjust_timer_default
+static inline void mce_intel_cmci_poll(void) { }
+#endif
+
+void mce_timer_kick(unsigned long interval);
+
#ifdef CONFIG_ACPI_APEI
int apei_write_mce(struct mce *m);
ssize_t apei_read_mce(struct mce *m, u64 *record_id);
Index: tip/arch/x86/kernel/cpu/mcheck/mce.c
===================================================================
--- tip.orig/arch/x86/kernel/cpu/mcheck/mce.c
+++ tip/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1256,6 +1256,14 @@ static unsigned long check_interval = 5
static DEFINE_PER_CPU(unsigned long, mce_next_interval); /* in jiffies */
static DEFINE_PER_CPU(struct timer_list, mce_timer);
+static unsigned long mce_adjust_timer_default(unsigned long interval)
+{
+ return interval;
+}
+
+static unsigned long (*mce_adjust_timer)(unsigned long interval) =
+ mce_adjust_timer_default;
+
static void mce_timer_fn(unsigned long data)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
@@ -1266,6 +1274,7 @@ static void mce_timer_fn(unsigned long d
if (mce_available(__this_cpu_ptr(&cpu_info))) {
machine_check_poll(MCP_TIMESTAMP,
&__get_cpu_var(mce_poll_banks));
+ mce_intel_cmci_poll();
}
/*
@@ -1273,14 +1282,38 @@ static void mce_timer_fn(unsigned long d
* polling interval, otherwise increase the polling interval.
*/
iv = __this_cpu_read(mce_next_interval);
- if (mce_notify_irq())
+ if (mce_notify_irq()) {
iv = max(iv / 2, (unsigned long) HZ/100);
- else
+ } else {
iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
+ iv = mce_adjust_timer(iv);
+ }
__this_cpu_write(mce_next_interval, iv);
+ /* Might have become 0 after CMCI storm subsided */
+ if (iv) {
+ t->expires = jiffies + iv;
+ add_timer_on(t, smp_processor_id());
+ }
+}
- t->expires = jiffies + iv;
- add_timer_on(t, smp_processor_id());
+/*
+ * Ensure that the timer is firing in @interval from now.
+ */
+void mce_timer_kick(unsigned long interval)
+{
+ struct timer_list *t = &__get_cpu_var(mce_timer);
+ unsigned long when = jiffies + interval;
+ unsigned long iv = __this_cpu_read(mce_next_interval);
+
+ if (timer_pending(t)) {
+ if (time_before(when, t->expires))
+ mod_timer_pinned(t, when);
+ } else {
+ t->expires = round_jiffies(when);
+ add_timer_on(t, smp_processor_id());
+ }
+ if (interval < iv)
+ __this_cpu_write(mce_next_interval, interval);
}
/* Must not be called in IRQ context where del_timer_sync() can deadlock */
@@ -1545,6 +1578,7 @@ static void __mcheck_cpu_init_vendor(str
switch (c->x86_vendor) {
case X86_VENDOR_INTEL:
mce_intel_feature_init(c);
+ mce_adjust_timer = mce_intel_adjust_timer;
break;
case X86_VENDOR_AMD:
mce_amd_feature_init(c);
@@ -1556,7 +1590,7 @@ static void __mcheck_cpu_init_vendor(str
static void mce_start_timer(unsigned int cpu, struct timer_list *t)
{
- unsigned long iv = check_interval * HZ;
+ unsigned long iv = mce_adjust_timer(check_interval * HZ);
__this_cpu_write(mce_next_interval, iv);
@@ -2272,8 +2306,8 @@ mce_cpu_callback(struct notifier_block *
mce_device_remove(cpu);
break;
case CPU_DOWN_PREPARE:
- del_timer_sync(t);
smp_call_function_single(cpu, mce_disable_cpu, &action, 1);
+ del_timer_sync(t);
break;
case CPU_DOWN_FAILED:
smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
Index: tip/arch/x86/kernel/cpu/mcheck/mce_intel.c
===================================================================
--- tip.orig/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ tip/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -15,6 +15,8 @@
#include <asm/msr.h>
#include <asm/mce.h>
+#include "mce-internal.h"
+
/*
* Support for Intel Correct Machine Check Interrupts. This allows
* the CPU to raise an interrupt when a corrected machine check happened.
@@ -30,7 +32,22 @@ static DEFINE_PER_CPU(mce_banks_t, mce_b
*/
static DEFINE_RAW_SPINLOCK(cmci_discover_lock);
-#define CMCI_THRESHOLD 1
+#define CMCI_THRESHOLD 1
+#define CMCI_POLL_INTERVAL (30 * HZ)
+#define CMCI_STORM_INTERVAL (1 * HZ)
+#define CMCI_STORM_TRESHOLD 5
+
+static DEFINE_PER_CPU(unsigned long, cmci_time_stamp);
+static DEFINE_PER_CPU(unsigned int, cmci_storm_cnt);
+static DEFINE_PER_CPU(unsigned int, cmci_storm_state);
+
+enum {
+ CMCI_STORM_NONE,
+ CMCI_STORM_ACTIVE,
+ CMCI_STORM_SUBSIDED,
+};
+
+static atomic_t cmci_storm_on_cpus;
static int cmci_supported(int *banks)
{
@@ -53,6 +70,73 @@ static int cmci_supported(int *banks)
return !!(cap & MCG_CMCI_P);
}
+void mce_intel_cmci_poll(void)
+{
+ if (__this_cpu_read(cmci_storm_state) == CMCI_STORM_NONE)
+ return;
+ machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
+}
+
+unsigned long mce_intel_adjust_timer(unsigned long interval)
+{
+ if (interval < CMCI_POLL_INTERVAL)
+ return interval;
+
+ switch (__this_cpu_read(cmci_storm_state)) {
+ case CMCI_STORM_ACTIVE:
+ /*
+ * We switch back to interrupt mode once the poll timer has
+ * silenced itself. That means no events recorded and the
+ * timer interval is back to our poll interval.
+ */
+ __this_cpu_write(cmci_storm_state, CMCI_STORM_SUBSIDED);
+ atomic_dec(&cmci_storm_on_cpus);
+
+ case CMCI_STORM_SUBSIDED:
+ /*
+ * We wait for all cpus to go back to SUBSIDED
+ * state. When that happens we switch back to
+ * interrupt mode.
+ */
+ if (!atomic_read(&cmci_storm_on_cpus)) {
+ __this_cpu_write(cmci_storm_state, CMCI_STORM_NONE);
+ cmci_reenable();
+ cmci_recheck();
+ }
+ return CMCI_POLL_INTERVAL;
+ default:
+ /*
+ * We have shiny wheather, let the poll do whatever it
+ * thinks.
+ */
+ return interval;
+ }
+}
+
+static bool cmci_storm_detect(void)
+{
+ unsigned int cnt = __this_cpu_read(cmci_storm_cnt);
+ unsigned long ts = __this_cpu_read(cmci_time_stamp);
+ unsigned long now = jiffies;
+
+ if (time_before_eq(now, ts + CMCI_STORM_INTERVAL)) {
+ cnt++;
+ } else {
+ cnt = 1;
+ __this_cpu_write(cmci_time_stamp, now);
+ }
+ __this_cpu_write(cmci_storm_cnt, cnt);
+
+ if (cnt <= CMCI_STORM_TRESHOLD)
+ return false;
+
+ cmci_clear();
+ __this_cpu_write(cmci_storm_state, CMCI_STORM_ACTIVE);
+ atomic_inc(&cmci_storm_on_cpus);
+ mce_timer_kick(CMCI_POLL_INTERVAL);
+ return true;
+}
+
/*
* The interrupt handler. This is called on every event.
* Just call the poller directly to log any events.
@@ -61,6 +145,8 @@ static int cmci_supported(int *banks)
*/
static void intel_threshold_interrupt(void)
{
+ if (cmci_storm_detect())
+ return;
machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
mce_notify_irq();
}
prev parent reply other threads:[~2012-06-06 21:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 21:27 [patch 0/6] x86: mce: Bugfixes, cleanups and a new CMCI poll version Thomas Gleixner
2012-06-06 21:27 ` [patch 1/6] x86: mce: Create devices in CPU_UP_PREPARE Thomas Gleixner
2012-06-06 21:38 ` Thomas Gleixner
2012-06-06 21:42 ` Borislav Petkov
2012-06-06 21:52 ` Thomas Gleixner
2012-06-06 21:27 ` [patch 2/6] x86: mce: Disable preemption when calling raise_local() Thomas Gleixner
2012-06-06 21:27 ` [patch 4/6] x86: mce: Split timer init Thomas Gleixner
2012-06-06 21:27 ` [patch 3/6] x86: mce: Serialize mce injection Thomas Gleixner
2012-06-06 21:27 ` [patch 5/6] x86: mce: Remove the frozen cases in the hotplug code Thomas Gleixner
2012-06-06 21:27 ` Thomas Gleixner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120606212334.833261657@linutronix.de \
--to=tglx@linutronix.de \
--cc=borislav.petkov@amd.com \
--cc=gong.chen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.