From: Dave Jones <davej@redhat.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: snd_pcm lockdep report from 3.3-rc6
Date: Thu, 7 Jun 2012 23:23:12 -0400 [thread overview]
Message-ID: <20120608032312.GA4594@redhat.com> (raw)
In-Reply-To: <s5hfwdd3ecn.wl%tiwai@suse.de>
On Mon, Mar 12, 2012 at 06:42:48PM +0100, Takashi Iwai wrote:
Hi Takashi,
> > [ INFO: possible recursive locking detected ]
> > 3.3.0-rc6+ #5 Not tainted
> > ---------------------------------------------
> > pulseaudio/1306 is trying to acquire lock:
> > (&(&substream->self_group.lock)->rlock/1){......}, at: [<ffffffffa0468c0b>] snd_pcm_action_group+0x9b/0x260 [snd_pcm]
> >
> > but task is already holding lock:
> > (&(&substream->self_group.lock)->rlock/1){......}, at: [<ffffffffa0468c0b>] snd_pcm_action_group+0x9b/0x260 [snd_pcm]
> >
> > other info that might help us debug this:
> > Possible unsafe locking scenario:
> >
> > CPU0
> > ----
> > lock(&(&substream->self_group.lock)->rlock/1);
> > lock(&(&substream->self_group.lock)->rlock/1);
> >
> > *** DEADLOCK ***
> >
> > May be due to missing lock nesting notation
> >
> > 4 locks held by pulseaudio/1306:
> > #0: (snd_pcm_link_rwlock){......}, at: [<ffffffffa046ab90>] snd_pcm_drop+0x60/0x100 [snd_pcm]
> > #1: (&(&substream->self_group.lock)->rlock){......}, at: [<ffffffffa046ab98>] snd_pcm_drop+0x68/0x100 [snd_pcm]
> > #2: (&(&substream->group->lock)->rlock){......}, at: [<ffffffffa0469ffe>] snd_pcm_action+0x3e/0xb0 [snd_pcm]
> > #3: (&(&substream->self_group.lock)->rlock/1){......}, at: [<ffffffffa0468c0b>] snd_pcm_action_group+0x9b/0x260 [snd_pcm]
> >
> > stack backtrace:
> > Pid: 1306, comm: pulseaudio Not tainted 3.3.0-rc6+ #5
> > Call Trace:
> > [<ffffffff810cee87>] __lock_acquire+0xe47/0x1bb0
> > [<ffffffff810a62b8>] ? sched_clock_cpu+0xb8/0x130
> > [<ffffffff810d030d>] lock_acquire+0x9d/0x220
> > [<ffffffffa0468c0b>] ? snd_pcm_action_group+0x9b/0x260 [snd_pcm]
> > [<ffffffff810ca91e>] ? put_lock_stats+0xe/0x40
> > [<ffffffff8169d3cd>] _raw_spin_lock_nested+0x4d/0x90
> > [<ffffffffa0468c0b>] ? snd_pcm_action_group+0x9b/0x260 [snd_pcm]
> > [<ffffffffa0468c0b>] snd_pcm_action_group+0x9b/0x260 [snd_pcm]
> > [<ffffffffa046a031>] snd_pcm_action+0x71/0xb0 [snd_pcm]
> > [<ffffffffa046a08a>] snd_pcm_stop+0x1a/0x20 [snd_pcm]
> > [<ffffffffa046abb1>] snd_pcm_drop+0x81/0x100 [snd_pcm]
> > [<ffffffffa046cdf8>] snd_pcm_common_ioctl1+0x678/0xc00 [snd_pcm]
> > [<ffffffffa046d7d7>] snd_pcm_playback_ioctl1+0x147/0x2e0 [snd_pcm]
> > [<ffffffff812c1cbc>] ? file_has_perm+0xdc/0xf0
> > [<ffffffffa046d9a4>] snd_pcm_playback_ioctl+0x34/0x40 [snd_pcm]
> > [<ffffffff811d2398>] do_vfs_ioctl+0x98/0x570
> > [<ffffffff811d2901>] sys_ioctl+0x91/0xa0
> > [<ffffffff816a5de9>] system_call_fastpath+0x16/0x1b
> >
> >
> > I suspect this ..
> >
> > static int snd_pcm_action(struct action_ops *ops,
> > struct snd_pcm_substream *substream,
> > int state)
> > {
> > int res;
> >
> > if (snd_pcm_stream_linked(substream)) {
> > --> if (!spin_trylock(&substream->group->lock)) {
> > spin_unlock(&substream->self_group.lock);
> > spin_lock(&substream->group->lock);
> > spin_lock(&substream->self_group.lock);
> > }
> > res = snd_pcm_action_group(ops, substream, state, 1);
> > spin_unlock(&substream->group->lock);
> > } else {
> > res = snd_pcm_action_single(ops, substream, state);
> > }
> > return res;
> > }
> >
> > Should that trylock be on self_group.lock ?
>
> No, the check above should be correct. The code tries to re-lock when
> the stream is linked like group-lock -> stream-lock.
>
> However, that code is known to be too tricky and messy for long time.
> It'd be really better to get rid of this complexity. I tried some
> times but failed to reach to the final goal due to lack of time.
>
> OK, let me respin my old patch. The refreshed one is attached below.
> (Note that it's totally untested. I have to leave my office now,
> sorry for that. Let me know if the wonder happens and it works :)
I'm not sure if I got back to you on this, but that patch did nothing
to change this for me, and I still see this on 3.5-rc1
Dave
next prev parent reply other threads:[~2012-06-08 3:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-12 14:35 snd_pcm lockdep report from 3.3-rc6 Dave Jones
2012-03-12 17:42 ` Takashi Iwai
2012-03-12 17:48 ` Dave Jones
2012-03-20 17:13 ` Dave Jones
2012-06-08 3:23 ` Dave Jones [this message]
2012-03-18 19:31 ` Maciej Rutecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120608032312.GA4594@redhat.com \
--to=davej@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.