All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fengguang Wu <fengguang.wu@intel.com>
To: Dave Chinner <david@fromorbit.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>,
	linux-kernel@vger.kernel.org,
	Gavin Shan <shangw@linux.vnet.ibm.com>
Subject: Re: [PATCH v2] writeback: avoid race when update bandwidth
Date: Thu, 14 Jun 2012 22:00:06 +0800	[thread overview]
Message-ID: <20120614140006.GB15553@localhost> (raw)
In-Reply-To: <20120614020559.GB7339@dastard>

On Thu, Jun 14, 2012 at 12:05:59PM +1000, Dave Chinner wrote:
> On Wed, Jun 13, 2012 at 08:14:34PM +0800, Fengguang Wu wrote:
> > On Wed, Jun 13, 2012 at 01:59:20PM +1000, Dave Chinner wrote:
> > > On Tue, Jun 12, 2012 at 07:52:19PM +0800, Fengguang Wu wrote:
> > > > On Tue, Jun 12, 2012 at 07:46:01PM +0800, Wanpeng Li wrote:
> > > > > From: Wanpeng Li <liwp@linux.vnet.ibm.com>
> > > > > 
> > > > > "V1 -> V2"
> > > > > * remove dirty_lock
> > > > > 
> > > > > Since bdi->wb.list_lock is used to protect the b_* lists,
> > > > > so the flushers who call wb_writeback to writeback pages will
> > > > > stuck when bandwidth update policy holds this lock. In order
> > > > > to avoid this race we can introduce a new bandwidth_lock who
> > > > > is responsible for protecting bandwidth update policy.
> > > > > 
> > > > > Signed-off-by: Wanpeng Li <liwp.linux@gmail.com>
> > > > 
> > > > Applied with a new title "writeback: use a standalone lock for
> > > > updating write bandwidth". "race" is sensitive because it often
> > > > refers to some locking error.
> > > 
> > > Fengguang - can we get some evidence that this is a contended lock
> > > before changing the scope of it? All of the previous "breaking up
> > > global locks" have been done based on lock contention data, so
> > > moving back to a global lock for this needs to have the same
> > > analysis provided...
> > 
> > Good point. Attached is the lockstat for the case "10 disks each runs
> > 100 dd dirtier tasks":
> > 
> >         lkp-ne02/JBOD-10HDD-thresh=4G/xfs-100dd-1-3.2.0-rc5
> 
> (nothing attached)
> 
> > The wb->list_lock contention is much better than I expected, which is
> > good.  What stand out are
> >                                                         waittime-total
> > - &rq->lock             by double_rq_lock()             6738952.13
> > - clockevents_lock      by clockevents_notify()         2155554.37
> > - mapping->tree_lock    by test_clear_page_writeback()   931550.13
> > - sb_lock               by grab_super_passive()          918815.87
> > - &zone->lru_lock       by pagevec_lru_move_fn()         912681.05
> > 
> > - sysfs_mutex           by sysfs_permission()           24029975.20 # mutex
> > - ip->i_lock            by xfs_ilock()                  18428284.10 # mrlock
> 
> The wait time is not really an indication of contention problems.
> Large wait time is usually an indication that the lock is being used
> a lot.

Right.

> What matters is the number of contentions vs the number of
> acquisitions, and the number of those contentions that bounced the
> lock. If the number of contentions is >= 0.5% of the acquisitions,
> then the lock can be considered hot and needing some work. If I look
> here:

I wonder if anyone has a simple script for sorting lock_stat output
based on that (and perhaps other selectable) criterion? It should be
possible to write on myself, but still.. ;-)

Default lock_stat output is sorted by absolute number of contentions.

> http://lists.linux.hp.com/~enw/ext4/3.2/3.2-full-lockstats.2/ffsb_fsscale.xfs.large_file_creates_threads=192/profiling/iteration.1/lock_stat
> 
> Which is a 192 thread concurrent write on a 48-core machine, the
> wb.list_lock shows 5,532 acquistions for the entire test, while the
> mapping tree lock took 440 million!. So your test isn't really one
> that shows wb.list_lock contention. The 192-thread mailserver
> workload from the same machine:
> 
> http://lists.linux.hp.com/~enw/ext4/3.2/3.2-full-lockstats.2/ffsb_fsscale.xfs.mail_server_threads=192/profiling/iteration.1/lock_stat
> 
> Shows about 7.1m acquisitions of the wb.list_lock, but only 28,000
> contentions. So it isn't really contended enough to justify
> replacing it with a global lock.

Right.

> FWIW, the third most contended lock on that workload is the XFS
> delayed write queue lock - 25M acquisitions for 600k contentions - a
> rate of about 2% which means quite severe contention.  That lock no
> longer exists in 3.5 - Christoph completely reworked the delayed
> write buffer support to remove the global list and lock because it
> was showing up in profiles like this...
> 
> Indeed, that profile shows that XFS owns 7 of the 10 most contended
> locks, and 3 of them have had significant work done to reduce the
> contention since 3.2 as a result of recent profile results like this.

Nice work!

Thanks,
Fengguang

  reply	other threads:[~2012-06-14 14:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-12 11:46 [PATCH v2] writeback: avoid race when update bandwidth Wanpeng Li
2012-06-12 11:52 ` Fengguang Wu
2012-06-12 11:58   ` Wanpeng Li
2012-06-13  3:59   ` Dave Chinner
2012-06-13 12:14     ` Fengguang Wu
2012-06-14  2:05       ` Dave Chinner
2012-06-14 14:00         ` Fengguang Wu [this message]
2012-06-15  0:06           ` Dave Chinner
2012-06-15  0:29             ` Fengguang Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120614140006.GB15553@localhost \
    --to=fengguang.wu@intel.com \
    --cc=david@fromorbit.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liwp.linux@gmail.com \
    --cc=shangw@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.