From: Mattia Dongili <malattia@linux.it>
To: alan@linux.intel.com
Cc: dri-devel@lists.freedesktop.org
Subject: gma500 suspend to ram fails (3.4)
Date: Sun, 17 Jun 2012 19:03:43 +0900 [thread overview]
Message-ID: <20120617100342.GF2326@kamineko.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 635 bytes --]
Hi,
I just switched from an ancient installation of emgd on a vaio X11 to
the mainstream gma500_gfx driver.
One issue I have on 3.4 is that suspend to ram fails in
psb_save_display_registers. I could only take a picture of the oops but
it's quite incomplete:
http://kamineko.org/oops/2012-06-17%2018.32.17.jpg
3.5-rc2 is not quite usable, I get a pile of warnings for
DRM_OBJECT_MAX_PROPERTY being too small and in the end I don't get
neither a console nor X.
here's attached a 3.4 boot dmesg, I'll recompile 3.5 soon to get started
with that too.
Is there anything else I can provide to help debug this?
Thanks!
--
mattia
:wq!
[-- Attachment #2: x11.dmesg --]
[-- Type: text/plain, Size: 42085 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0+ (mattia@ludwig) (gcc version 4.7.0 (Debian 4.7.1-1) ) #28 SMP PREEMPT Sat Jun 16 17:25:13 JST 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f64d000 (usable)
[ 0.000000] BIOS-e820: 000000007f64d000 - 000000007f64e000 (reserved)
[ 0.000000] BIOS-e820: 000000007f64e000 - 000000007f656000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f656000 - 000000007f69f000 (reserved)
[ 0.000000] BIOS-e820: 000000007f69f000 - 000000007f6a2000 (usable)
[ 0.000000] BIOS-e820: 000000007f6a2000 - 000000007f6df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6df000 - 000000007f6ef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f6ef000 - 000000007f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000007f6f0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed4c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Sony Corporation VPCX11AKJ/VAIO, BIOS R0082U4 10/13/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f6f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask 080000000 write-back
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 base 07F6F0000 mask 0FFFF0000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000007f6f0000 - 000000007f700000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 7f6ee120 00064 (v01 Sony VAIO 20091013 01000013)
[ 0.000000] ACPI: FACP 7f6ed000 000F4 (v03 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20120320/tbfadt-629)
[ 0.000000] ACPI: DSDT 7f6e2000 0582B (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: FACS 7f6a6000 00040
[ 0.000000] ACPI: HPET 7f6ec000 00038 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: APIC 7f6eb000 00068 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: MCFG 7f6ea000 0003C (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: SLIC 7f6e9000 00176 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: ASF! 7f6e8000 000A5 (v32 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: BOOT 7f6e1000 00028 (v01 Sony VAIO 20091013 MSFT 01000013)
[ 0.000000] ACPI: SSDT 7f6df000 004CE (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f6f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f64d
[ 0.000000] 0: 0x0007f69f -> 0x0007f6a2
[ 0.000000] 0: 0x0007f6ef -> 0x0007f6f0
[ 0.000000] On node 0 totalpages: 521696
[ 0.000000] free_area_init_node: node 0, pgdat c139d780, node_mem_map f680d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2302 pages used for memmap
[ 0.000000] HighMem zone: 292181 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f67e9000 s25280 r0 d23872 u49152
[ 0.000000] pcpu-alloc: s25280 r0 d23872 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517618
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4.0+ root=/dev/sda1 ro no_console_suspend acpi_backlight=vendor resume=/dev/sda2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f6f0)
[ 0.000000] Memory: 2065060k/2087872k available (2621k kernel code, 21724k reserved, 1103k data, 336k init, 1177932k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13a4000 - 0xc13f8000 ( 336 kB)
[ 0.000000] .data : 0xc128f643 - 0xc13a3480 (1103 kB)
[ 0.000000] .text : 0xc1000000 - 0xc128f643 (2621 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6006000 soft=f6008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 1999.932 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.86 BogoMIPS (lpj=7999728)
[ 0.004171] pid_max: default: 32768 minimum: 301
[ 0.004344] Security Framework initialized
[ 0.004453] Mount-cache hash table entries: 512
[ 0.004859] Initializing cgroup subsys cpuacct
[ 0.004941] Initializing cgroup subsys devices
[ 0.005022] Initializing cgroup subsys freezer
[ 0.005103] Initializing cgroup subsys blkio
[ 0.005230] Disabled fast string operations
[ 0.005312] CPU: Physical Processor ID: 0
[ 0.005386] CPU: Processor Core ID: 0
[ 0.005463] mce: CPU supports 5 MCE banks
[ 0.005549] CPU0: Thermal monitoring enabled (TM2)
[ 0.005634] using mwait in idle threads.
[ 0.005755] ACPI: Core revision 20120320
[ 0.016140] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020242] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060025] CPU0: Intel(R) Atom(TM) CPU Z550 @ 2.00GHz stepping 02
[ 0.064003] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[ 0.064003] ... version: 3
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.088099] CPU 1 irqstacks, hard=f609c000 soft=f609e000
[ 0.088112] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.100051] Brought up 2 CPUs
[ 0.100278] Total of 2 processors activated (7999.72 BogoMIPS).
[ 0.100764] PM: Registering ACPI NVS region [mem 0x7f64e000-0x7f655fff] (32768 bytes)
[ 0.100764] PM: Registering ACPI NVS region [mem 0x7f6a2000-0x7f6defff] (249856 bytes)
[ 0.100764] NET: Registered protocol family 16
[ 0.100864] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.100970] ACPI: bus type pci registered
[ 0.101098] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.101217] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.101305] PCI: Using MMCONFIG for extended config space
[ 0.101392] PCI: Using configuration type 1 for base access
[ 0.104203] bio: create slab <bio-0> at 0
[ 0.104341] ACPI: Added _OSI(Module Device)
[ 0.104341] ACPI: Added _OSI(Processor Device)
[ 0.104341] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.104356] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.108338] ACPI: EC: Look up EC in DSDT
[ 0.111611] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.126530] ACPI: SSDT 7f658c10 0027B (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.127539] ACPI: Dynamic OEM Table Load:
[ 0.127714] ACPI: SSDT (null) 0027B (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.128218] ACPI: SSDT 7f657690 0061C (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.129180] ACPI: Dynamic OEM Table Load:
[ 0.129348] ACPI: SSDT (null) 0061C (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.132671] ACPI: SSDT 7f658f10 000D0 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.133657] ACPI: Dynamic OEM Table Load:
[ 0.133832] ACPI: SSDT (null) 000D0 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.134233] ACPI: SSDT 7f656f10 00083 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.136551] ACPI: Dynamic OEM Table Load:
[ 0.136726] ACPI: SSDT (null) 00083 (v02 Sony VAIO 20091013 INTL 20051117)
[ 0.136961] ACPI: Interpreter enabled
[ 0.136961] ACPI: (supports S0 S3 S4 S5)
[ 0.136961] ACPI: Using IOAPIC for interrupt routing
[ 0.147377] ACPI: EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
[ 0.147793] ACPI: No dock devices found.
[ 0.147882] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.148407] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.149117] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.149201] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.149293] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.149405] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0x7fffffff]
[ 0.149515] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.149627] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff]
[ 0.149739] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.149849] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.150043] PCI host bridge to bus 0000:00
[ 0.150124] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.150204] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.150293] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.150383] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff]
[ 0.150474] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.150565] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[ 0.150655] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.150746] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.150852] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000
[ 0.150944] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000
[ 0.150972] pci 0000:00:02.0: reg 10: [mem 0x94200000-0x9427ffff]
[ 0.150987] pci 0000:00:02.0: reg 14: [io 0x6070-0x6077]
[ 0.151001] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff]
[ 0.151016] pci 0000:00:02.0: reg 1c: [mem 0x94280000-0x942bffff]
[ 0.151151] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300
[ 0.151174] pci 0000:00:1b.0: reg 10: [mem 0x942c0000-0x942c3fff 64bit]
[ 0.151257] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.151293] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400
[ 0.151382] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.151416] pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400
[ 0.151505] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.151543] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300
[ 0.151593] pci 0000:00:1d.0: reg 20: [io 0x6040-0x605f]
[ 0.151637] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300
[ 0.152032] pci 0000:00:1d.1: reg 20: [io 0x6020-0x603f]
[ 0.152080] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300
[ 0.152130] pci 0000:00:1d.2: reg 20: [io 0x6000-0x601f]
[ 0.152190] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320
[ 0.152223] pci 0000:00:1d.7: reg 10: [mem 0x00000000-0x000003ff]
[ 0.152355] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.152389] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100
[ 0.152475] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180
[ 0.152523] pci 0000:00:1f.1: reg 20: [io 0x6060-0x606f]
[ 0.152638] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000
[ 0.152670] pci 0000:01:00.0: reg 10: [mem 0x93100000-0x9310ffff 64bit]
[ 0.152801] pci 0000:01:00.0: supports D1
[ 0.152806] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.160061] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.160167] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.160186] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x941fffff]
[ 0.160205] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff pref]
[ 0.160345] pci 0000:02:00.0: [11ab:4380] type 00 class 0x020000
[ 0.160378] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92003fff 64bit]
[ 0.160396] pci 0000:02:00.0: reg 18: [io 0x3000-0x30ff]
[ 0.160450] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.160536] pci 0000:02:00.0: supports D1 D2
[ 0.160541] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.168058] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.168163] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.168181] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x930fffff]
[ 0.168200] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff pref]
[ 0.168234] pci_bus 0000:00: on NUMA node 0
[ 0.168254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.168559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.168674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.168834] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.168926] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.169042] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.174151] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11 12)
[ 0.174807] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12)
[ 0.175457] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.176127] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.176778] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.177433] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.178091] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.178741] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.179422] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.179551] vgaarb: loaded
[ 0.179628] vgaarb: bridge control possible 0000:00:02.0
[ 0.179948] SCSI subsystem initialized
[ 0.180058] libata version 3.00 loaded.
[ 0.180133] PCI: Using ACPI for IRQ routing
[ 0.188891] PCI: pci_cache_line_size set to 64 bytes
[ 0.188988] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.188995] reserve RAM buffer: 000000007f64d000 - 000000007fffffff
[ 0.189002] reserve RAM buffer: 000000007f6a2000 - 000000007fffffff
[ 0.189008] reserve RAM buffer: 000000007f6f0000 - 000000007fffffff
[ 0.189350] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.189445] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.189713] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.196037] Switching to clocksource hpet
[ 0.196358] pnp: PnP ACPI init
[ 0.196459] ACPI: bus type pnp registered
[ 0.197322] pnp 00:00: [bus 00-ff]
[ 0.197330] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.197335] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.197341] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.197346] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.197352] pnp 00:00: [mem 0x7f800000-0x7fffffff window]
[ 0.197358] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.197363] pnp 00:00: [mem 0x000e0000-0x000effff window]
[ 0.197369] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.197374] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.197496] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.197691] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.197697] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.197703] pnp 00:01: [mem 0x40000000-0x7fffffff]
[ 0.197708] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.197713] pnp 00:01: [mem 0xfed40000-0xfed4bfff]
[ 0.197718] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.197724] pnp 00:01: [mem 0xffc00000-0xffc3ffff]
[ 0.197822] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.197912] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.197996] system 00:01: [mem 0x40000000-0x7fffffff] could not be reserved
[ 0.198088] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.198180] system 00:01: [mem 0xfed40000-0xfed4bfff] has been reserved
[ 0.198270] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.198361] system 00:01: [mem 0xffc00000-0xffc3ffff] has been reserved
[ 0.198454] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.198882] pnp 00:02: Plug and Play ACPI device, IDs SNY6001 (disabled)
[ 0.198908] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.198989] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.199061] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.199176] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.199270] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.199308] pnp 00:05: [io 0x0070-0x0077]
[ 0.199329] pnp 00:05: [irq 8]
[ 0.199414] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.199447] pnp 00:06: [io 0x002e-0x002f]
[ 0.199452] pnp 00:06: [io 0x004e-0x004f]
[ 0.199457] pnp 00:06: [io 0x0061]
[ 0.199462] pnp 00:06: [io 0x0063]
[ 0.199466] pnp 00:06: [io 0x0065]
[ 0.199471] pnp 00:06: [io 0x0067]
[ 0.199476] pnp 00:06: [io 0x0080-0x0083]
[ 0.199480] pnp 00:06: [io 0x0092]
[ 0.199485] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.199490] pnp 00:06: [io 0x2000]
[ 0.199494] pnp 00:06: [io 0x2004]
[ 0.199499] pnp 00:06: [io 0x0820-0x0823]
[ 0.199504] pnp 00:06: [io 0x0000]
[ 0.199509] pnp 00:06: [io 0x0084-0x008f]
[ 0.199514] pnp 00:06: [io 0x0374-0x0375]
[ 0.199518] pnp 00:06: [io 0x0377]
[ 0.199523] pnp 00:06: [io 0x03f4-0x03f5]
[ 0.199528] pnp 00:06: [io 0x03f7]
[ 0.199532] pnp 00:06: [io 0x0400-0x040f]
[ 0.199540] pnp 00:06: [io 0x0410-0x041f]
[ 0.199545] pnp 00:06: [io 0x0600-0x063f]
[ 0.199550] pnp 00:06: [io 0x0500-0x055f]
[ 0.199555] pnp 00:06: [io 0x1040-0x107f]
[ 0.199690] system 00:06: [io 0x2000] has been reserved
[ 0.199774] system 00:06: [io 0x2004] has been reserved
[ 0.199855] system 00:06: [io 0x0820-0x0823] has been reserved
[ 0.199949] system 00:06: [io 0x0374-0x0375] has been reserved
[ 0.200048] system 00:06: [io 0x0377] has been reserved
[ 0.200135] system 00:06: [io 0x03f4-0x03f5] has been reserved
[ 0.200223] system 00:06: [io 0x03f7] has been reserved
[ 0.200309] system 00:06: [io 0x0400-0x040f] has been reserved
[ 0.200398] system 00:06: [io 0x0410-0x041f] has been reserved
[ 0.200487] system 00:06: [io 0x0600-0x063f] has been reserved
[ 0.200575] system 00:06: [io 0x0500-0x055f] has been reserved
[ 0.200664] system 00:06: [io 0x1040-0x107f] has been reserved
[ 0.200752] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.200788] pnp 00:07: [io 0x0060]
[ 0.200793] pnp 00:07: [io 0x0064]
[ 0.200805] pnp 00:07: [irq 1]
[ 0.200896] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.200926] pnp 00:08: [irq 12]
[ 0.201015] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
[ 0.201055] pnp: PnP ACPI: found 9 devices
[ 0.201136] ACPI: ACPI bus type pnp unregistered
[ 0.238442] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.238592] pci 0000:00:1d.7: BAR 0: assigned [mem 0x942c4000-0x942c43ff]
[ 0.238688] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.238772] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.238856] pci 0000:00:1c.0: bridge window [mem 0x93100000-0x941fffff]
[ 0.238946] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff pref]
[ 0.239067] pci 0000:02:00.0: BAR 6: assigned [mem 0x91000000-0x9101ffff pref]
[ 0.239181] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.239268] pci 0000:00:1c.1: bridge window [io 0x3000-0x4fff]
[ 0.239359] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x930fffff]
[ 0.239452] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff pref]
[ 0.239614] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.239620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.239626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239632] pci_bus 0000:00: resource 7 [mem 0x7f800000-0x7fffffff]
[ 0.239638] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.239643] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000effff]
[ 0.239649] pci_bus 0000:00: resource 10 [mem 0x000f0000-0x000fffff]
[ 0.239655] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
[ 0.239661] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.239667] pci_bus 0000:01: resource 1 [mem 0x93100000-0x941fffff]
[ 0.239672] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff pref]
[ 0.239679] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.239684] pci_bus 0000:02: resource 1 [mem 0x92000000-0x930fffff]
[ 0.239690] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff pref]
[ 0.239879] NET: Registered protocol family 2
[ 0.240093] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.240624] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.241832] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.242577] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.242668] TCP: reno registered
[ 0.242751] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.242853] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.243242] NET: Registered protocol family 1
[ 0.243369] pci 0000:00:02.0: Boot video device
[ 0.243522] pci 0000:00:1d.7: enabling device (0000 -> 0002)
[ 1.840076] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 1.840353] PCI: CLS 0 bytes, default 64
[ 1.840534] Simple Boot Flag at 0x44 set to 0x1
[ 1.841304] audit: initializing netlink socket (disabled)
[ 1.841406] type=2000 audit(1339927150.840:1): initialized
[ 1.842018] highmem bounce pool size: 64 pages
[ 1.842338] VFS: Disk quotas dquot_6.5.2
[ 1.842464] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.843078] msgmni has been set to 1732
[ 1.843524] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.843630] io scheduler noop registered
[ 1.843703] io scheduler deadline registered
[ 1.843824] io scheduler cfq registered (default)
[ 1.844375] intel_idle: MWAIT substates: 0x3020220
[ 1.844391] intel_idle: v0.4 model 0x1C
[ 1.844396] intel_idle: lapic_timer_reliable_states 0x2
[ 1.844401] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.844579] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.845568] pata_sch 0000:00:1f.1: version 0.2
[ 1.845648] pata_sch 0000:00:1f.1: setting latency timer to 64
[ 1.846286] scsi0 : pata_sch
[ 1.846581] scsi1 : pata_sch
[ 1.847246] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6060 irq 14
[ 1.847331] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6068 irq 15
[ 1.847480] sky2: driver version 1.30
[ 1.847683] sky2 0000:02:00.0: Yukon-2 UL 2 chip revision 0
[ 1.847891] sky2 0000:02:00.0: irq 40 for MSI/MSI-X
[ 1.848312] sky2 0000:02:00.0: eth0: addr 00:1d:ba:be:2e:a7
[ 1.848504] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.851573] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.851714] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.851940] mousedev: PS/2 mouse device common for all mice
[ 1.852363] cpuidle: using governor ladder
[ 1.852590] cpuidle: using governor menu
[ 1.853058] TCP: cubic registered
[ 1.853284] NET: Registered protocol family 10
[ 1.853859] NET: Registered protocol family 17
[ 1.853943] Registering the dns_resolver key type
[ 1.854130] Using IPI No-Shortcut mode
[ 1.854333] PM: Checking hibernation image partition /dev/sda2
[ 1.866722] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.008583] ata1.00: ATA-7: SAMSUNG MMCRE28GFMXP-MVB, VBM1AS1Q, max UDMA/100
[ 2.008669] ata1.00: 250069680 sectors, multi 16: LBA48
[ 2.016542] ata1.00: configured for UDMA/100
[ 2.016887] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MMCRE28G VBM1 PQ: 0 ANSI: 5
[ 2.017355] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 2.017663] sd 0:0:0:0: [sda] Write Protect is off
[ 2.017742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.017825] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.018911] sda: sda1 sda2 sda3
[ 2.019744] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.782989] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
[ 2.796185] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 2.798850] PM: Hibernation image partition 8:2 present
[ 2.798864] PM: Looking for hibernation image.
[ 2.799524] PM: Image not found (code -22)
[ 2.799535] PM: Hibernation image not present or could not be loaded.
[ 2.799568] registered taskstats version 1
[ 2.803168] kjournald starting. Commit interval 5 seconds
[ 2.803275] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.803300] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 2.803488] Freeing unused kernel memory: 336k freed
[ 2.803869] Write protecting the kernel text: 2624k
[ 2.804001] Write protecting the kernel read-only data: 908k
[ 3.560562] ACPI: Requesting acpi_cpufreq
[ 3.612239] ACPI: AC Adapter [AC] (on-line)
[ 3.614365] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 3.615068] ACPI: Lid Switch [LID0]
[ 3.637388] usbcore: registered new interface driver usbfs
[ 3.637546] usbcore: registered new interface driver hub
[ 3.640129] ACPI: Battery Slot [BAT0] (battery present)
[ 3.640540] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 3.640678] ACPI: Power Button [PWRB]
[ 3.642696] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.642838] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.645308] usbcore: registered new device driver usb
[ 3.652108] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.652208] ACPI: Thermal Zone [ATF0] (46 C)
[ 3.653463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.653573] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.653581] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.653597] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.653680] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.659932] Linux agpgart interface v0.103
[ 3.679062] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.679123] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x942c4000
[ 3.686211] [drm] Initialized drm 1.1.0 20060810
[ 3.690058] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.699641] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.699751] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.699870] usb usb1: Product: EHCI Host Controller
[ 3.699956] usb usb1: Manufacturer: Linux 3.4.0+ ehci_hcd
[ 3.700518] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.701299] hub 1-0:1.0: USB hub found
[ 3.701535] hub 1-0:1.0: 8 ports detected
[ 3.703929] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.704228] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.704239] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.704338] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.704530] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00006040
[ 3.704720] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.704812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.705202] usb usb2: Product: UHCI Host Controller
[ 3.705291] usb usb2: Manufacturer: Linux 3.4.0+ uhci_hcd
[ 3.705378] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.705740] hub 2-0:1.0: USB hub found
[ 3.705833] hub 2-0:1.0: 2 ports detected
[ 3.706237] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.706248] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.706353] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.706547] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006020
[ 3.706737] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.706831] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.706949] usb usb3: Product: UHCI Host Controller
[ 3.707035] usb usb3: Manufacturer: Linux 3.4.0+ uhci_hcd
[ 3.707124] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.707895] hub 3-0:1.0: USB hub found
[ 3.707999] hub 3-0:1.0: 2 ports detected
[ 3.708661] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.708673] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.708777] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.708970] uhci_hcd 0000:00:1d.2: irq 23, io base 0x00006000
[ 3.718022] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.718128] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.721884] usb usb4: Product: UHCI Host Controller
[ 3.721985] usb usb4: Manufacturer: Linux 3.4.0+ uhci_hcd
[ 3.722193] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.723233] cfg80211: Calling CRDA to update world regulatory domain
[ 3.725144] hub 4-0:1.0: USB hub found
[ 3.725256] hub 4-0:1.0: 2 ports detected
[ 3.739213] gma500 0000:00:02.0: setting latency timer to 64
[ 3.750007] Stolen memory information
[ 3.750094] base in RAM: 0x7f800000
[ 3.750175] size: 7932K, calculated by (GTT RAM base) - (Stolen base), seems wrong
[ 3.750287] the correct size should be: 8M(dvmt mode=3)
[ 3.771708] sony_laptop: Sony Notebook Control Driver v0.6
[ 3.778699] Set up 1983 stolen pages starting at 0x7f800000, GTT offset 0K
[ 3.778988] [drm] SGX core id = 0x01130000
[ 3.779072] [drm] SGX core rev major = 0x01, minor = 0x02
[ 3.779156] [drm] SGX core rev maintenance = 0x01, designer = 0x00
[ 3.780316] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:21/SNY5001:00/input/input6
[ 3.780636] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:21/SNY5001:00/input/input7
[ 3.792094] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.792194] [drm] No driver support for vblank timestamp query.
[ 3.820623] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 3.836620] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x217
[ 4.010880] ath: EEPROM regdomain: 0x65
[ 4.010889] ath: EEPROM indicates we should expect a direct regpair map
[ 4.010898] ath: Country alpha2 being used: 00
[ 4.010903] ath: Regpair used: 0x65
[ 4.012105] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 4.037352] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 4.038019] Registered led device: ath9k-phy0
[ 4.038068] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8180000, irq=16
[ 4.146049] usb 1-5: config 1 has an invalid interface number: 1 but max is 0
[ 4.146163] usb 1-5: config 1 has no interface number 0
[ 4.148164] usb 1-5: New USB device found, idVendor=05c6, idProduct=9224
[ 4.148270] usb 1-5: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 4.148369] usb 1-5: Product: Qualcomm Gobi 2000
[ 4.148520] usb 1-5: Manufacturer: Qualcomm Incorporated
[ 4.194764] cfg80211: World regulatory domain updated:
[ 4.194859] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.194976] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.195088] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.195200] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.195315] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.195432] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.205739] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x217
[ 4.255756] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.260068] usb 1-8: new high-speed USB device number 3 using ehci_hcd
[ 4.396443] usb 1-8: New USB device found, idVendor=05ca, idProduct=18b6
[ 4.396580] usb 1-8: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 4.396704] usb 1-8: Manufacturer: Ricoh co. Ltd.
[ 4.474597] usbcore: registered new interface driver usbserial
[ 4.475305] usbcore: registered new interface driver usbserial_generic
[ 4.476071] USB Serial support registered for generic
[ 4.476232] usbserial: USB Serial Driver core
[ 4.481451] usbcore: registered new interface driver qcserial
[ 4.482287] USB Serial support registered for Qualcomm USB modem
[ 4.483027] qcserial 1-5:1.1: Qualcomm USB modem converter detected
[ 4.484196] usb 1-5: Qualcomm USB modem converter now attached to ttyUSB0
[ 4.488177] Linux video capture interface: v2.00
[ 4.494208] uvcvideo: Unable to create debugfs directory
[ 4.494422] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:18b6)
[ 4.497739] input: UVC Camera (05ca:18b6) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9
[ 4.498077] usbcore: registered new interface driver uvcvideo
[ 4.498168] USB Video Class driver (1.1.1)
[ 5.303774] gma500 0000:00:02.0: allocated 1366x768 fb
[ 5.303981] fbcon: psbfb (fb0) is primary device
[ 5.644684] Console: switching to colour frame buffer device 170x48
[ 5.655496] fb0: psbfb frame buffer device
[ 5.655571] drm: registered panic notifier
[ 5.655743] gma500 0000:00:02.0: Backlight lvds set brightness 74407440
[ 5.655903] [drm] Initialized gma500 1.0.0 2011-06-06 for 0000:00:02.0 on minor 0
[ 5.656284] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 5.656567] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.656870] lpc_sch: probe of 0000:00:1f.0 failed with error -16
[ 5.676435] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.676597] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5.732230] hda_codec: ALC262: SKU not ready 0x411111f0
[ 5.734660] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 5.737769] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.801678] Adding 4883756k swap on /dev/sda2. Priority:-1 extents:1 across:4883756k SS
[ 7.045086] EXT3-fs (sda1): using internal journal
[ 7.290963] loop: module loaded
[ 8.948321] kjournald starting. Commit interval 5 seconds
[ 8.954521] EXT3-fs (sda3): using internal journal
[ 8.958766] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 10.267043] RPC: Registered named UNIX socket transport module.
[ 10.273375] RPC: Registered udp transport module.
[ 10.277630] RPC: Registered tcp transport module.
[ 10.281752] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.311705] NFS: Registering the id_resolver key type
[ 10.330211] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.682997] Bluetooth: Core ver 2.16
[ 13.689366] NET: Registered protocol family 31
[ 13.695323] Bluetooth: HCI device and connection manager initialized
[ 13.701198] Bluetooth: HCI socket layer initialized
[ 13.706950] Bluetooth: L2CAP socket layer initialized
[ 13.712149] Bluetooth: SCO socket layer initialized
[ 13.749405] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.749411] Bluetooth: BNEP filters: protocol multicast
[ 13.754263] Bluetooth: RFCOMM TTY layer initialized
[ 13.754274] Bluetooth: RFCOMM socket layer initialized
[ 13.754279] Bluetooth: RFCOMM ver 1.11
[ 14.734426] gma500 0000:00:02.0: Backlight lvds set brightness 74407440
[ 15.404870] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.126206] gma500 0000:00:02.0: Backlight lvds set brightness 74407440
[ 19.222173] colord[3031]: segfault at 8 ip 08052674 sp bf9e4980 error 4 in colord[8048000+20000]
[ 21.096875] sky2 0000:02:00.0: eth0: enabling interface
[ 21.097565] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.826359] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.213794] sky2 0000:02:00.0: eth0: disabling interface
[ 25.226725] sky2 0000:02:00.0: eth0: enabling interface
[ 25.227520] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.832242] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.869543] wlan0: authenticate with 00:3a:9d:72:7d:66
[ 28.876046] wlan0: send auth to 00:3a:9d:72:7d:66 (try 1/3)
[ 28.878055] wlan0: authenticated
[ 28.888040] wlan0: associate with 00:3a:9d:72:7d:66 (try 1/3)
[ 28.892186] wlan0: RX AssocResp from 00:3a:9d:72:7d:66 (capab=0x31 status=0 aid=1)
[ 28.892206] wlan0: associated
[ 28.899077] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 39.504089] wlan0: no IPv6 routers present
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2012-06-17 10:09 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-17 10:03 Mattia Dongili [this message]
2012-06-18 20:04 ` gma500 suspend to ram fails (3.4) Patrik Jakobsson
[not found] ` <20120618122629.54ad3c62@bob.linux.org.uk>
2012-06-19 10:56 ` Mattia Dongili
2012-06-20 21:19 ` Mattia Dongili
2012-07-01 22:06 ` Mattia Dongili
2012-07-02 10:43 ` Alan Cox
2012-07-02 22:11 ` Mattia Dongili
2012-07-02 22:29 ` Mattia Dongili
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120617100342.GF2326@kamineko.org \
--to=malattia@linux.it \
--cc=alan@linux.intel.com \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.