Re: RCU stalls on 32-bit pmac SMP

["Paul E. McKenney" <paulmck@linux.vnet.ibm.com>]

On Mon, Jun 18, 2012 at 10:35:46AM +1000, Benjamin Herrenschmidt wrote:
> Hi Paul !
> 
> I was about to go debug something else when I hit that with -rc3 (plus
> the patch to fix the current bug.h breakage) on a 32-bit PowerMac G4 SMP
> (2 CPUs): About 1mn pause at boot followed by a bunch of RCU stall
> messages. Log below. Any idea where to start looking ?
> 
> pci 0002:20:0f.0: reg 30: [mem 0xf5100000-0xf51fffff pref]
> PCI 0000:00 Cannot reserve Legacy IO [io  0x802000-0x802fff]
> PCI 0001:10 Cannot reserve Legacy IO [io  0x0000-0x0fff]
> pci_bus 0000:00: resource 4 [io  0x802000-0x1001fff]
> pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
> pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff]
> pci_bus 0001:10: resource 4 [io  0x0000-0x7fffff]
> pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
> pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
> pci_bus 0002:20: resource 4 [io  0xff7fe000-0xffffdfff]
> pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
> bio: create slab <bio-0> at 0
> vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> vgaarb: bridge control possible 0000:00:10.0
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> Switching to clocksource timebase
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP: reno registered
> UDP hash table entries: 512 (order: 2, 16384 bytes)
> UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> NET: Registered protocol family 1
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> pci 0001:10:18.0: enabling device (0000 -> 0002)
> pci 0001:10:19.0: enabling device (0000 -> 0002)
> PCI: CLS mismatch (32 != 1020), using 32 bytes
> highmem bounce pool size: 64 pages
> NFS: Registering the id_resolver key type
> Key type id_resolver registered
> msgmni has been set to 1500
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Using unsupported 1680x1050 ATY,BlueStone_A at 9c008000, depth=8, pitch=1792
> Console: switching to colour frame buffer device 210x65
> fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,BlueStoneParent@10/ATY,BlueStone_A
> Using unsupported 640x480 ATY,BlueStone_B at 99008000, depth=8, pitch=768
> checking generic (9c008000 1cb600) vs hw (99008000 5a000)
> fb1: Open Firmware frame buffer device on /pci@f0000000/ATY,BlueStoneParent@10/ATY,BlueStone_B
> Generic RTC Driver v1.07
> Generic non-volatile memory driver v1.1
> brd: module loaded
> loop: module loaded
> MacIO PCI driver attached to Keylargo chipset
> adb: starting probe task...
> adb: finished probe task...
> mesh: configured for synchronous 5 MB/s
> st: Version 20101219, fixed bufsize 32768, s/g segs 256
> pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
> scsi0 : pata_macio
> ata1: PATA max UDMA/66 irq 19
> ata1.00: ATA-5: ST380021A, 5.05, max UDMA/100
> ata1.00: 156301488 sectors, multi 16: LBA 
> ata1.01: ATA-5: ST380021A, 3.75, max UDMA/100
> ata1.01: 156301488 sectors, multi 16: LBA 
> ata1.00: configured for UDMA/66
> ata1.01: configured for UDMA/66
> scsi 0:0:0:0: Direct-Access     ATA      ST380021A        5.05 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sd 0:0:0:0: Attached scsi generic sg0 type 0
>  sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
> sd 0:0:0:0: [sda] Attached SCSI disk
> scsi 0:0:1:0: Direct-Access     ATA      ST380021A        3.75 PQ: 0 ANSI: 5
> sd 0:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
> sd 0:0:1:0: [sdb] Write Protect is off
> sd 0:0:1:0: Attached scsi generic sg1 type 0
> sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
> sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> INFO: rcu_sched self-detected stall on CPU { 0}  (t=16163 jiffies)
> Call Trace:
> INFO: rcu_sched self-detected stall on CPU { 1}  (t=16163 jiffies)
> Call Trace:
> [ef877d30] [c0008d04] show_stack+0x50/0x158 (unreliable)
> [ef877d70] [c0097fe4] __rcu_pending+0x184/0x46c
> [ef877da0] [c00991a0] rcu_check_callbacks+0x7c/0x168
> [ef877dc0] [c0044a40] update_process_times+0x3c/0x70
> [ef877de0] [c0083a3c] tick_sched_timer+0x88/0x100
> [ef877e10] [c005b11c] __run_hrtimer.clone.29+0x54/0x104
> [ef877e30] [c005bf44] hrtimer_interrupt+0x158/0x3f8
> [ef877ea0] [c000b5c4] timer_interrupt+0x1cc/0x204
> [ef877ed0] [c0011b88] ret_from_except+0x0/0x1c
> --- Exception: 901 at cpu_idle+0xe4/0x188

Am I reading this correctly?  Did the system really take a scheduling-clock
interrupt from within another scheduling-clock interrupt?

If so, my first question is "Why did the scheduling-clock interrupt
run for so long?"  ;-)

							Thanx, Paul

>     LR = cpu_idle+0xc8/0x188
> [ef877f90] [c00097e8] cpu_idle+0x60/0x188 (unreliable)
> [ef877fc0] [c046531c] start_secondary+0x2c8/0x2cc
> [ef877ff0] [00003278] 0x3278
> [ef873b60] [c0008d04] show_stack+0x50/0x158 (unreliable)
> [ef873ba0] [c0097fe4] __rcu_pending+0x184/0x46c
> [ef873bd0] [c0099240] rcu_check_callbacks+0x11c/0x168
> [ef873bf0] [c0044a40] update_process_times+0x3c/0x70
> [ef873c10] [c0083a3c] tick_sched_timer+0x88/0x100
> [ef873c40] [c005b11c] __run_hrtimer.clone.29+0x54/0x104
> [ef873c60] [c005bf44] hrtimer_interrupt+0x158/0x3f8
> [ef873cd0] [c000b5c4] timer_interrupt+0x1cc/0x204
> [ef873d00] [c0011b88] ret_from_except+0x0/0x1c
> --- Exception: 901 at wake_up_new_task+0x134/0x16c
>     LR = wake_up_new_task+0x134/0x16c
> [ef873dc0] [c0065f08] wake_up_new_task+0xfc/0x16c (unreliable)
> [ef873df0] [c0035530] do_fork+0xe8/0x2bc
> [ef873e30] [c0008a4c] sys_clone+0x50/0x90
> [ef873e50] [c00114b8] ret_from_syscall+0x0/0x40
> --- Exception: c00 at kernel_thread+0x28/0x68
>     LR = __call_usermodehelper+0x40/0xdc
> [ef873f10] [c005f5c8] async_run_entry_fn+0x128/0x1e4 (unreliable)
> [ef873f20] [ef878c00] 0xef878c00
> [ef873f40] [c004e668] process_one_work+0x150/0x3f0
> [ef873f70] [c00514f0] worker_thread+0x18c/0x37c
> [ef873fb0] [c00567bc] kthread+0x84/0x88
> [ef873ff0] [c000f514] kernel_thread+0x4c/0x68
> pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
> scsi1 : pata_macio
> ata2: PATA max MWDMA2 irq 20
>  sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13
> sd 0:0:1:0: [sdb] Attached SCSI disk
> ata2.00: ATAPI: PIONEER DVD-RW  DVR-104, A227, max UDMA/33
> ata2.00: configured for MWDMA2
> scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-104  A227 PQ: 0 ANSI: 5
> pata-macio 0.00021000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 1
> scsi2 : pata_macio
> ata3: PATA max MWDMA2 irq 21
> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
> sr 1:0:0:0: Attached scsi generic sg2 type 5
> sungem.c:v1.0 David S. Miller <davem@redhat.com>
> gem 0002:20:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:6f:04:b2
> PPP generic driver version 2.4.2
> PPP Deflate Compression module registered
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci_hcd 0001:10:18.0: OHCI Host Controller
> ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ohci_hcd 0001:10:19.0: OHCI Host Controller
> ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> mousedev: PS/2 mouse device common for all mice
> usbcore: registered new interface driver appletouch
> PowerMac i2c bus pmu 2 registered
> i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/rtc
> i2c i2c-0: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/power-mgt
> PowerMac i2c bus pmu 1 registered
> i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/rtc
> i2c i2c-1: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/via-pmu@16000/power-mgt
> PowerMac i2c bus mac-io 0 registered
> i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/cereal
> i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/deq
> i2c i2c-2: i2c-powermac: invalid reg on /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
> PowerMac i2c bus uni-n 1 registered
> i2c i2c-3: i2c-powermac: invalid reg on /uni-n@f8000000/i2c@f8001000/cereal
> PowerMac i2c bus uni-n 0 registered
> i2c i2c-4: i2c-powermac: invalid reg on /uni-n@f8000000/i2c@f8001000/cereal
> APM Battery Driver
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> oprofile: using ppc/7450 performance monitoring.
> TCP: cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> NET: Registered protocol family 15
> Key type dns_resolver registered
> PM: Hibernation image not present or could not be loaded.
> input: PMU as /devices/virtual/input/input0
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs (sda15): mounted filesystem with writeback data mode
> VFS: Mounted root (ext3 filesystem) readonly on device 8:15.
> usb 1-1: new full-speed USB device number 2 using ohci_hcd
> devtmpfs: mounted
> Freeing unused kernel memory: 240k freed
> hub 1-1:1.0: USB hub found
> hub 1-1:1.0: 3 ports detected
> usb 1-2: new full-speed USB device number 3 using ohci_hcd
> hub 1-2:1.0: USB hub found
> hub 1-2:1.0: 3 ports detected
> usb 1-1.3: new full-speed USB device number 4 using ohci_hcd
> input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input1
> hid-generic 0003:05AC:020B.0001: input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-1.3/input0
> input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input2
> hid-generic 0003:05AC:020B.0002: input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:10:18.0-1.3/input1
> usb 1-2.3: new low-speed USB device number 5 using ohci_hcd
> hid-generic 0003:05AC:9219.0003: claimed by neither input, hiddev nor hidraw
> udevd[1209]: starting version 175
> EXT3-fs (sda15): using internal journal
> sungem_phy: PHY ID: 2060e1, addr: 0
> gem 0002:20:0f.0: eth0: Found BCM5421 PHY
> gem 0002:20:0f.0: eth0: Link is up at 100 Mbps, full-duplex
> gem 0002:20:0f.0: eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
> sshd (2042): /proc/2042/oom_adj is deprecated, please use /proc/2042/oom_score_adj instead.
> 
>