From: Michael Neuling <mikey@neuling.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <michael@ellerman.id.au>
Cc: mikey@neuling.org, linuxppc-dev@ozlabs.org,
schwab@linux-m68k.org, Anton Blanchard <anton@samba.org>,
Olof Johannsson <olof@lixom.net>
Subject: [PATCH 7/18] powerpc: merge STK_REG/PARAM/FRAMESIZE
Date: Thu, 21 Jun 2012 12:04:34 +1000 [thread overview]
Message-ID: <20120621020434.39541D431D9@localhost.localdomain> (raw)
In-Reply-To: <1340244266.960241.475925824909.qpush@ale>
Merge the defines of STACKFRAMESIZE, STK_REG, STK_PARAM from different
places.
Signed-off-by: Michael Neuling <mikey@neuling.org>
---
arch/powerpc/include/asm/ppc_asm.h | 5 +
arch/powerpc/lib/checksum_64.S | 3
arch/powerpc/lib/copypage_power7.S | 3
arch/powerpc/lib/copyuser_power7.S | 3
arch/powerpc/lib/memcpy_power7.S | 3
arch/powerpc/mm/hash_low_64.S | 88 +++++++++++--------------
arch/powerpc/platforms/cell/beat_hvCall.S | 28 +++----
arch/powerpc/platforms/powernv/opal-takeover.S | 2
arch/powerpc/platforms/pseries/hvCall.S | 72 +++++++++-----------
9 files changed, 93 insertions(+), 114 deletions(-)
Index: powerpc-test/arch/powerpc/include/asm/ppc_asm.h
===================================================================
--- powerpc-test.orig/arch/powerpc/include/asm/ppc_asm.h
+++ powerpc-test/arch/powerpc/include/asm/ppc_asm.h
@@ -181,6 +181,11 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLP
#ifdef __KERNEL__
#ifdef CONFIG_PPC64
+#define STACKFRAMESIZE 256
+#define STK_REG(i) (112 + ((i)-14)*8)
+
+#define STK_PARAM(i) (48 + ((i)-3)*8)
+
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
Index: powerpc-test/arch/powerpc/lib/checksum_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/checksum_64.S
+++ powerpc-test/arch/powerpc/lib/checksum_64.S
@@ -65,9 +65,6 @@ _GLOBAL(csum_tcpudp_magic)
srwi r3,r3,16
blr
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
/*
* Computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit).
Index: powerpc-test/arch/powerpc/lib/copypage_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copypage_power7.S
+++ powerpc-test/arch/powerpc/lib/copypage_power7.S
@@ -20,9 +20,6 @@
#include <asm/page.h>
#include <asm/ppc_asm.h>
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
_GLOBAL(copypage_power7)
/*
* We prefetch both the source and destination using enhanced touch
Index: powerpc-test/arch/powerpc/lib/copyuser_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/copyuser_power7.S
+++ powerpc-test/arch/powerpc/lib/copyuser_power7.S
@@ -19,9 +19,6 @@
*/
#include <asm/ppc_asm.h>
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
.macro err1
100:
.section __ex_table,"a"
Index: powerpc-test/arch/powerpc/lib/memcpy_power7.S
===================================================================
--- powerpc-test.orig/arch/powerpc/lib/memcpy_power7.S
+++ powerpc-test/arch/powerpc/lib/memcpy_power7.S
@@ -19,9 +19,6 @@
*/
#include <asm/ppc_asm.h>
-#define STACKFRAMESIZE 256
-#define STK_REG(i) (112 + ((i)-14)*8)
-
_GLOBAL(memcpy_power7)
#ifdef CONFIG_ALTIVEC
cmpldi r5,16
Index: powerpc-test/arch/powerpc/mm/hash_low_64.S
===================================================================
--- powerpc-test.orig/arch/powerpc/mm/hash_low_64.S
+++ powerpc-test/arch/powerpc/mm/hash_low_64.S
@@ -34,14 +34,6 @@
* | CR save area (SP + 8)
* SP ---> +-- Back chain (SP + 0)
*/
-#define STACKFRAMESIZE 256
-
-/* Save parameters offsets */
-#define STK_PARM(i) (STACKFRAMESIZE + 48 + ((i)-3)*8)
-
-/* Save non-volatile offsets */
-#define STK_REG(i) (112 + ((i)-14)*8)
-
#ifndef CONFIG_PPC_64K_PAGES
@@ -64,9 +56,9 @@ _GLOBAL(__hash_page_4K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(R6)(r1)
- std r8,STK_PARM(R8)(r1)
- std r9,STK_PARM(R9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -162,7 +154,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(R4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -192,11 +184,11 @@ htab_insert_pte:
rldicr r3,r0,3,63-3 /* r3 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -215,11 +207,11 @@ _GLOBAL(htab_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* Patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -255,7 +247,7 @@ htab_pte_insert_ok:
* (maybe add eieio may be good still ?)
*/
htab_write_out_pte:
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3, 0
htab_bail:
@@ -288,8 +280,8 @@ htab_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(R9)(r1) /* segment size */
- ld r8,STK_PARM(R8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* Patched by htab_finish_init() */
@@ -312,7 +304,7 @@ htab_wrong_access:
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -340,9 +332,9 @@ _GLOBAL(__hash_page_4K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(R6)(r1)
- std r8,STK_PARM(R8)(r1)
- std r9,STK_PARM(R9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -452,7 +444,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(R4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -473,7 +465,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
andis. r0,r31,_PAGE_COMBO@h
beq htab_inval_old_hpte
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
ori r26,r6,0x8000 /* Load the hidx mask */
ld r26,0(r26)
addi r5,r25,36 /* Check actual HPTE_SUB bit, this */
@@ -495,11 +487,11 @@ htab_special_pfn:
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -522,11 +514,11 @@ _GLOBAL(htab_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_4K /* page size */
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(htab_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -559,8 +551,8 @@ htab_inval_old_hpte:
mr r4,r31 /* PTE.pte */
li r5,0 /* PTE.hidx */
li r6,MMU_PAGE_64K /* psize */
- ld r7,STK_PARM(R9)(r1) /* ssize */
- ld r8,STK_PARM(R8)(r1) /* local */
+ ld r7,STK_PARAM(R9)(r1) /* ssize */
+ ld r8,STK_PARAM(R8)(r1) /* local */
bl .flush_hash_page
/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
lis r0,_PAGE_HPTE_SUB@h
@@ -576,7 +568,7 @@ htab_pte_insert_ok:
/* Insert slot number & secondary bit in PTE second half,
* clear _PAGE_BUSY and set approriate HPTE slot bit
*/
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
li r0,_PAGE_BUSY
andc r30,r30,r0
/* HPTE SUB bit */
@@ -630,8 +622,8 @@ htab_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_4K /* page size */
- ld r7,STK_PARM(R9)(r1) /* segment size */
- ld r8,STK_PARM(R8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(htab_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -644,7 +636,7 @@ _GLOBAL(htab_call_hpte_updatepp)
/* Clear the BUSY bit and Write out the PTE */
li r0,_PAGE_BUSY
andc r30,r30,r0
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3,0
b htab_bail
@@ -657,7 +649,7 @@ htab_wrong_access:
htab_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b htab_bail
@@ -677,9 +669,9 @@ _GLOBAL(__hash_page_64K)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
/* Save all params that we need after a function call */
- std r6,STK_PARM(R6)(r1)
- std r8,STK_PARM(R8)(r1)
- std r9,STK_PARM(R9)(r1)
+ std r6,STK_PARAM(R6)(r1)
+ std r8,STK_PARAM(R8)(r1)
+ std r9,STK_PARAM(R9)(r1)
/* Save non-volatile registers.
* r31 will hold "old PTE"
@@ -780,7 +772,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FT
/* At this point, r3 contains new PP bits, save them in
* place of "access" in the param area (sic)
*/
- std r3,STK_PARM(R4)(r1)
+ std r3,STK_PARAM(R4)(r1)
/* Get htab_hash_mask */
ld r4,htab_hash_mask@got(2)
@@ -813,11 +805,11 @@ ht64_insert_pte:
rldicr r3,r0,3,63-3 /* r0 = (hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,0 /* !bolted, !secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert1)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -836,11 +828,11 @@ _GLOBAL(ht64_call_hpte_insert1)
rldicr r3,r0,3,63-3 /* r0 = (~hash & mask) << 3 */
/* Call ppc_md.hpte_insert */
- ld r6,STK_PARM(R4)(r1) /* Retrieve new pp bits */
+ ld r6,STK_PARAM(R4)(r1) /* Retrieve new pp bits */
mr r4,r29 /* Retrieve va */
li r7,HPTE_V_SECONDARY /* !bolted, secondary */
li r8,MMU_PAGE_64K
- ld r9,STK_PARM(R9)(r1) /* segment size */
+ ld r9,STK_PARAM(R9)(r1) /* segment size */
_GLOBAL(ht64_call_hpte_insert2)
bl . /* patched by htab_finish_init() */
cmpdi 0,r3,0
@@ -876,7 +868,7 @@ ht64_pte_insert_ok:
* (maybe add eieio may be good still ?)
*/
ht64_write_out_pte:
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r30,0(r6)
li r3, 0
ht64_bail:
@@ -909,8 +901,8 @@ ht64_modify_pte:
/* Call ppc_md.hpte_updatepp */
mr r5,r29 /* va */
li r6,MMU_PAGE_64K
- ld r7,STK_PARM(R9)(r1) /* segment size */
- ld r8,STK_PARM(R8)(r1) /* get "local" param */
+ ld r7,STK_PARAM(R9)(r1) /* segment size */
+ ld r8,STK_PARAM(R8)(r1) /* get "local" param */
_GLOBAL(ht64_call_hpte_updatepp)
bl . /* patched by htab_finish_init() */
@@ -933,7 +925,7 @@ ht64_wrong_access:
ht64_pte_insert_failure:
/* Bail out restoring old PTE */
- ld r6,STK_PARM(R6)(r1)
+ ld r6,STK_PARAM(R6)(r1)
std r31,0(r6)
li r3,-1
b ht64_bail
Index: powerpc-test/arch/powerpc/platforms/cell/beat_hvCall.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/cell/beat_hvCall.S
+++ powerpc-test/arch/powerpc/platforms/cell/beat_hvCall.S
@@ -22,8 +22,6 @@
#include <asm/ppc_asm.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
/* Not implemented on Beat, now */
#define HCALL_INST_PRECALL
#define HCALL_INST_POSTCALL
@@ -74,7 +72,7 @@ _GLOBAL(beat_hcall_norets8)
mr r6,r7
mr r7,r8
mr r8,r9
- ld r10,STK_PARM(R10)(r1)
+ ld r10,STK_PARAM(R10)(r1)
HVSC /* invoke the hypervisor */
@@ -94,7 +92,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -108,7 +106,7 @@ _GLOBAL(beat_hcall1)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
lwz r0,8(r1)
@@ -125,7 +123,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -139,7 +137,7 @@ _GLOBAL(beat_hcall2)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
@@ -157,7 +155,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -171,7 +169,7 @@ _GLOBAL(beat_hcall3)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -190,7 +188,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -204,7 +202,7 @@ _GLOBAL(beat_hcall4)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -224,7 +222,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -238,7 +236,7 @@ _GLOBAL(beat_hcall5)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -259,7 +257,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_PRECALL
- std r4,STK_PARM(R4)(r1) /* save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* save ret buffer */
mr r11,r3
mr r3,r5
@@ -273,7 +271,7 @@ _GLOBAL(beat_hcall6)
HCALL_INST_POSTCALL
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
Index: powerpc-test/arch/powerpc/platforms/powernv/opal-takeover.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/powernv/opal-takeover.S
+++ powerpc-test/arch/powerpc/platforms/powernv/opal-takeover.S
@@ -14,8 +14,6 @@
#include <asm/asm-offsets.h>
#include <asm/opal.h>
-#define STK_PARAM(i) (48 + ((i)-3)*8)
-
#define H_HAL_TAKEOVER 0x5124
#define H_HAL_TAKEOVER_QUERY_MAGIC -1
Index: powerpc-test/arch/powerpc/platforms/pseries/hvCall.S
===================================================================
--- powerpc-test.orig/arch/powerpc/platforms/pseries/hvCall.S
+++ powerpc-test/arch/powerpc/platforms/pseries/hvCall.S
@@ -13,8 +13,6 @@
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
-#define STK_PARM(i) (48 + ((i)-3)*8)
-
#ifdef CONFIG_TRACEPOINTS
.section ".toc","aw"
@@ -26,7 +24,7 @@ hcall_tracepoint_refcount:
.section ".text"
/*
- * precall must preserve all registers. use unused STK_PARM()
+ * precall must preserve all registers. use unused STK_PARAM()
* areas to save snapshots and opcode. We branch around this
* in early init (eg when populating the MMU hashtable) by using an
* unconditional cpu feature.
@@ -40,28 +38,28 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- std r3,STK_PARM(R3)(r1); \
- std r4,STK_PARM(R4)(r1); \
- std r5,STK_PARM(R5)(r1); \
- std r6,STK_PARM(R6)(r1); \
- std r7,STK_PARM(R7)(r1); \
- std r8,STK_PARM(R8)(r1); \
- std r9,STK_PARM(R9)(r1); \
- std r10,STK_PARM(R10)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
+ std r4,STK_PARAM(R4)(r1); \
+ std r5,STK_PARAM(R5)(r1); \
+ std r6,STK_PARAM(R6)(r1); \
+ std r7,STK_PARAM(R7)(r1); \
+ std r8,STK_PARAM(R8)(r1); \
+ std r9,STK_PARAM(R9)(r1); \
+ std r10,STK_PARAM(R10)(r1); \
std r0,16(r1); \
- addi r4,r1,STK_PARM(FIRST_REG); \
+ addi r4,r1,STK_PARAM(FIRST_REG); \
stdu r1,-STACK_FRAME_OVERHEAD(r1); \
bl .__trace_hcall_entry; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(R3)(r1); \
- ld r4,STK_PARM(R4)(r1); \
- ld r5,STK_PARM(R5)(r1); \
- ld r6,STK_PARM(R6)(r1); \
- ld r7,STK_PARM(R7)(r1); \
- ld r8,STK_PARM(R8)(r1); \
- ld r9,STK_PARM(R9)(r1); \
- ld r10,STK_PARM(R10)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
+ ld r4,STK_PARAM(R4)(r1); \
+ ld r5,STK_PARAM(R5)(r1); \
+ ld r6,STK_PARAM(R6)(r1); \
+ ld r7,STK_PARAM(R7)(r1); \
+ ld r8,STK_PARAM(R8)(r1); \
+ ld r9,STK_PARAM(R9)(r1); \
+ ld r10,STK_PARAM(R10)(r1); \
mtlr r0; \
1:
@@ -79,8 +77,8 @@ END_FTR_SECTION(0, 1); \
cmpdi r12,0; \
beq+ 1f; \
mflr r0; \
- ld r6,STK_PARM(R3)(r1); \
- std r3,STK_PARM(R3)(r1); \
+ ld r6,STK_PARAM(R3)(r1); \
+ std r3,STK_PARAM(R3)(r1); \
mr r4,r3; \
mr r3,r6; \
std r0,16(r1); \
@@ -88,7 +86,7 @@ END_FTR_SECTION(0, 1); \
bl .__trace_hcall_exit; \
addi r1,r1,STACK_FRAME_OVERHEAD; \
ld r0,16(r1); \
- ld r3,STK_PARM(R3)(r1); \
+ ld r3,STK_PARAM(R3)(r1); \
mtlr r0; \
1:
@@ -132,7 +130,7 @@ _GLOBAL(plpar_hcall)
HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -143,7 +141,7 @@ _GLOBAL(plpar_hcall)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -168,7 +166,7 @@ _GLOBAL(plpar_hcall_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -179,7 +177,7 @@ _GLOBAL(plpar_hcall_raw)
HVSC /* invoke the hypervisor */
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -198,7 +196,7 @@ _GLOBAL(plpar_hcall9)
HCALL_INST_PRECALL(R5)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -206,14 +204,14 @@ _GLOBAL(plpar_hcall9)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(R11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(R12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(R13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
@@ -238,7 +236,7 @@ _GLOBAL(plpar_hcall9_raw)
mfcr r0
stw r0,8(r1)
- std r4,STK_PARM(R4)(r1) /* Save ret buffer */
+ std r4,STK_PARAM(R4)(r1) /* Save ret buffer */
mr r4,r5
mr r5,r6
@@ -246,14 +244,14 @@ _GLOBAL(plpar_hcall9_raw)
mr r7,r8
mr r8,r9
mr r9,r10
- ld r10,STK_PARM(R11)(r1) /* put arg7 in R10 */
- ld r11,STK_PARM(R12)(r1) /* put arg8 in R11 */
- ld r12,STK_PARM(R13)(r1) /* put arg9 in R12 */
+ ld r10,STK_PARAM(R11)(r1) /* put arg7 in R10 */
+ ld r11,STK_PARAM(R12)(r1) /* put arg8 in R11 */
+ ld r12,STK_PARAM(R13)(r1) /* put arg9 in R12 */
HVSC /* invoke the hypervisor */
mr r0,r12
- ld r12,STK_PARM(R4)(r1)
+ ld r12,STK_PARAM(R4)(r1)
std r4, 0(r12)
std r5, 8(r12)
std r6, 16(r12)
next prev parent reply other threads:[~2012-06-21 2:04 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-21 2:04 [PATCH 0/18] powerpc: convert GPR usage to %r0-31 and R0-31 Michael Neuling
2012-06-21 2:04 ` [PATCH 1/18] powerpc: Add defines for R0-R31 Michael Neuling
2012-06-21 2:04 ` [PATCH 2/18] powerpc: modify macro ready for %r0 register change Michael Neuling
2012-06-21 2:04 ` [PATCH 3/18] powerpc: fix usage of register macros getting ready for %r0 change Michael Neuling
2012-06-21 2:04 ` [PATCH 4/18] powerpc/kvm: sldi should be sld Michael Neuling
2012-06-21 2:04 ` [PATCH 5/18] powerpc: convert to %r for all GPR usage Michael Neuling
2012-06-21 2:04 ` [PATCH 6/18] powerpc/pasemi: move lbz/stbciz to ppc-opcode.h Michael Neuling
2012-06-21 2:04 ` Michael Neuling [this message]
2012-06-21 2:04 ` [PATCH 8/18] powerpc: merge VCPU_GPR Michael Neuling
2012-06-21 2:04 ` [PATCH 9/18] powerpc: change mtcrf to use real register names Michael Neuling
2012-06-21 2:04 ` [PATCH 10/18] powerpc: change LOAD_REG_ADDR " Michael Neuling
2012-06-21 2:04 ` [PATCH 11/18] powerpc: fixes for instructions not using correct register naming Michael Neuling
2012-06-21 2:04 ` [PATCH 12/18] powerpc: fix VSX macros so register names aren't wrapped Michael Neuling
2012-06-21 2:04 ` [PATCH 13/18] powerpc: introduce new ___PPC_RA/B/S/T macros Michael Neuling
2012-06-21 2:04 ` [PATCH 14/18] powerpc: start using ___PPC_RA/B/S/T where necessary Michael Neuling
2012-06-21 2:04 ` [PATCH 15/18] powerpc: Introduce new __REG_R macros Michael Neuling
2012-06-21 2:04 ` [PATCH 16/18] powerpc: enforce usage of R0-R31 where possible Michael Neuling
2012-06-21 2:04 ` [PATCH 17/18] powerpc: Add defines for RA 0-R31 Michael Neuling
2012-06-21 2:04 ` [PATCH 18/18] powerpc: enforce usage of RA 0-R31 where possible Michael Neuling
-- strict thread matches above, loose matches on Subject: below --
2012-06-25 23:33 [PATCH 0/18] powerpc: convert GPR usage to %r0-31 and R0-31 Michael Neuling
2012-06-25 23:33 ` [PATCH 7/18] powerpc: merge STK_REG/PARAM/FRAMESIZE Michael Neuling
2012-06-14 6:15 [PATCH 0/18] powerpc: convert GPR usage to %r0-31 and R0-31 Michael Neuling
2012-06-14 6:15 ` [PATCH 7/18] powerpc: merge STK_REG/PARAM/FRAMESIZE Michael Neuling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120621020434.39541D431D9@localhost.localdomain \
--to=mikey@neuling.org \
--cc=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=michael@ellerman.id.au \
--cc=olof@lixom.net \
--cc=paulus@samba.org \
--cc=schwab@linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.