From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-staging.git/sr@denx.de
Date: Thu, 5 Jul 2012 15:10:26 +0200 [thread overview]
Message-ID: <201207051510.26245.sr@denx.de> (raw)
In-Reply-To: <201206220801.15509.sr@denx.de>
Hi Albert,
as you seem to be working on U-Boot patches right now, here another short
reminder from me. ;)
Thanks,
Stefan
On Friday 22 June 2012 08:01:15 Stefan Roese wrote:
> Hi Albert,
>
> as you requested, here a short reminder...
>
> On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote:
> > Hi Albert!
> >
> > I have collected all of the remaining ARM/SPEAr patches in my
> > staging repository. There are some dependencies between the
> > patches, so I also added the NOR, NAND and ethernet patches
> > in this pull request. The patches have the Acked-by from the
> > corresponding custodians (Joe for networking, Scott for NAND,
> > myself for NOR).
> >
> > Since most of the patches are ARM/SPEAr platform related, I'm
> > pushing the patchset through your ARM repository. Please pull
> > and push to Wolfgang.
> >
> > Thanks,
> > Stefan
> >
> >
> > The following changes since commit
> >
> > 4398d55991eb3c2484a2a8e991d701e5d7a64874:
> > net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500)
> >
> > are available in the git repository at:
> > git://www.denx.de/git/u-boot-staging.git sr at denx.de
> >
> > for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db:
> > MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05
> >
> > 08:42:50 +0200)
> >
> > ----------------------------------------------------------------
> >
> > Amit Virdi (10):
> > st_smi: Return error in case TFF is not set
> > st_smi: Change SMI timeout values
> > st_smi: Enhance the error handling
> > st_smi: Change timeout loop implementation
> > SPEAr: Fix ARM relocation support
> > SPEAr: Eliminate dependency on Xloader table
> > SPEAr: Initialize SNOR in early_board_init_f
> > SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
> > cleanup/SPEAr: Remove unnecessary parenthesis
> > cleanup/SPEAr: Define configuration flags more elegantly
> >
> > Armando Visconti (4):
> > st_smi: Removed no needed dependency on ST_M25Pxx_ID
> > st_smi: Change the flash probing method
> > st_smi: Fix bug in flash_print_info()
> > st_smi: Fixed page size for Winbond W25Q128FV flash
> >
> > Shiraz Hashim (5):
> > st_smi: Move status register read before modifying ctrl register
> > SPEAr: Enable autoneg for ethernet
> > SPEAr: Enable dcache for fast file transfer
> > SPEAr: explicitly select clk src for UART
> > SPEAr: Correct SoC ID offset in misc configuration space
> >
> > Simon Glass (1):
> > arm: Don't use printf() in SPL builds
> >
> > Stefan Roese (10):
> > net: Multiple updates/enhancements to designware.c
> > GPIO: Add SPEAr GPIO driver
> > SPL: common/Makefile: Add image.c to SPL build
> > SPL: lib/Makefile: Add crc32.c to SPL build
> > SPL: ARM: spear: Remove some objects from SPL build
> > Makefile: Add u-boot.spr build target (SPEAr)
> > SPL: ARM: spear: Add SPL support for SPEAr600 platform
> > rtc/m41t62: Add support for M41T82 with HT (Halt Update)
> > i2c: designware_i2c.c: Add support for the "i2c probe" command
> > MTD: SPEAr SMI: Add write support for length < 4 bytes
> >
> > Vipin KUMAR (14):
> > mtd/NAND: Add FSMC driver support
> > SPEAr: Configure FSMC driver for NAND interface
> > mtd/NAND: Remove obsolete SPEAr specific NAND drivers
> > st_smi: Add support for SPEAr SMI driver
> > st_smi: Read status until timeout happens
> > SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
> > SPEAr: Configure network support for spear SoCs
> > SPEAr: Add macb driver support for spear310 and spear320
> > SPEAr: Add basic arch related support for SPEAr SoCs
> > SPEAr: Add configuration options for spear3xx and spear6xx boards
> > SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
> > SPEAr: Change the default environment variables
> > SPEAr: Enable usb device high speed support
> > SPEAr: Enable udc and usb-console support only for usbtty
> >
> > configuration
> >
> > Vipin Kumar (6):
> > st_smi: Fix smi read status
> > SPEAr: Add interface information in initialization
> > SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
> > SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
> > SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
> > SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and
> > evb
> >
> > Makefile | 17 +
> > arch/arm/cpu/arm926ejs/spear/Makefile | 25 +-
> > arch/arm/cpu/arm926ejs/spear/cpu.c | 87 ++++
> > arch/arm/cpu/arm926ejs/spear/spear600.c | 236 ++++++++++
> > arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++++++
> > arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 ++++++++
> > .../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++++
> > .../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++++
> > .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++++
> > .../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++++
> > arch/arm/cpu/arm926ejs/spear/start.S | 122 +++++
> > arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 ++++
> > arch/arm/include/asm/arch-spear/clk.h | 27 ++
> > arch/arm/include/asm/arch-spear/gpio.h | 40 ++
> > arch/arm/include/asm/arch-spear/hardware.h | 63 ++-
> > arch/arm/include/asm/arch-spear/spr_defs.h | 23 +
> > arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +-
> > arch/arm/include/asm/arch-spear/spr_misc.h | 147 +++++-
> > arch/arm/include/asm/arch-spear/spr_nand.h | 57 ---
> > arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++
> > arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 +
> > .../arm/include/asm/arch-spear/spr_xloader_table.h | 67 ---
> > arch/arm/lib/eabi_compat.c | 3 +-
> > board/spear/common/Makefile | 2 +
> > board/spear/common/spr_misc.c | 102 ++--
> > board/spear/spear300/config.mk | 39 --
> > board/spear/spear300/spear300.c | 27 +-
> > board/spear/spear310/config.mk | 44 --
> > board/spear/spear310/spear310.c | 44 +-
> > board/spear/spear320/config.mk | 44 --
> > board/spear/spear320/spear320.c | 43 +-
> > board/spear/spear600/Makefile | 2 +
> > board/spear/spear600/config.mk | 39 --
> > board/spear/spear600/spear600.c | 30 +-
> > boards.cfg | 24 +-
> > common/Makefile | 2 +-
> > config.mk | 4 +
> > doc/README.spear | 54 ++-
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/spear_gpio.c | 102 ++++
> > drivers/i2c/designware_i2c.c | 16 +-
> > drivers/mtd/Makefile | 2 +-
> > drivers/mtd/nand/Makefile | 1 +
> > drivers/mtd/nand/fsmc_nand.c | 486
> >
> > ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c |
> > 124 -----
> >
> > drivers/mtd/{spr_smi.c => st_smi.c} | 255 ++++++----
> > drivers/net/designware.c | 126 +++--
> > drivers/net/designware.h | 2 +
> > drivers/rtc/m41t62.c | 10 +-
> > include/configs/spear-common.h | 94 ++--
> > include/configs/{spear3xx.h => spear3xx_evb.h} | 62 ++-
> > include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +-
> > include/linux/mtd/fsmc_nand.h | 101 ++++
> > .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +-
> > include/netdev.h | 2 +-
> > lib/Makefile | 2 +-
> > 56 files changed, 3229 insertions(+), 769 deletions(-)
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
> > create mode 100644
> >
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c create
> > mode 100644 arch/arm/cpu/arm926ejs/spear/start.S
> >
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> > create mode 100644 arch/arm/include/asm/arch-spear/clk.h
> > create mode 100644 arch/arm/include/asm/arch-spear/gpio.h
> > delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
> > create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h
> > delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h
> > delete mode 100644 board/spear/spear300/config.mk
> > delete mode 100644 board/spear/spear310/config.mk
> > delete mode 100644 board/spear/spear320/config.mk
> > delete mode 100644 board/spear/spear600/config.mk
> > create mode 100644 drivers/gpio/spear_gpio.c
> > create mode 100644 drivers/mtd/nand/fsmc_nand.c
> > delete mode 100644 drivers/mtd/nand/spr_nand.c
> > rename drivers/mtd/{spr_smi.c => st_smi.c} (62%)
> > rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
> > rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
> > create mode 100644 include/linux/mtd/fsmc_nand.h
> > rename arch/arm/include/asm/arch-spear/spr_smi.h =>
> >
> > include/linux/mtd/st_smi.h (95%)
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
--
Viele Gr??e,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
next prev parent reply other threads:[~2012-07-05 13:10 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-05 6:58 [U-Boot] Please pull u-boot-staging.git/sr@denx.de Stefan Roese
2012-06-22 6:01 ` Stefan Roese
2012-06-22 9:18 ` Albert ARIBAUD
2012-07-05 13:10 ` Stefan Roese [this message]
2012-07-05 21:37 ` Albert ARIBAUD
-- strict thread matches above, loose matches on Subject: below --
2012-07-06 7:01 Stefan Roese
2012-07-06 21:30 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207051510.26245.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.