[PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28

[marex@denx.de (Marek Vasut)]

Dear Alain-Serge Nagni,

> Hi Marek,
> 
>  1) Thanks for the advice, I will remember to not top post :-)

You did it again ;-)

>  2) I spent lot of time testing your new additions to the mxs SPI driver
> and it works fine. Great job.

On what platform did you test it? And with what SPI peripherals? Can I possibly 
get your proper Tested-by: line?

> Regards,
> 
> Alain-Serge
> 
> 
> --- On Thu, 6/28/12, Marek Vasut <marex@denx.de> wrote:
> 
> From: Marek Vasut <marex@denx.de>
> Subject: Re: [PATCH 7/7] ARM: mxs: Add SPI driver for mx233/mx28
> To: linux-arm-kernel at lists.infradead.org
> Cc: "Alain-Serge Nagni" <alainsergenagni@yahoo.com>, "Fabio Estevam"
> <festevam@gmail.com>, "Shawn Guo" <shawn.guo@linaro.org> Date: Thursday,
> June 28, 2012, 6:09 PM
> 
> Dear Alain-Serge Nagni,
> 
> > Hi Fabio and Marek,
> >
> >  So I did rebuild the Kernel and UBoot to support device tree.  I did
> >
> > reboot the system and this time I?m not having any kernel panic. Which is
> > a good signJ. After investigation I notice that the  SSP2 node status is
> > marked ?disabled? (in the file imx28.dtsi).  So there is no way based on
> > the patch that was publish to have the imx-spi driver loaded in the
> > kernel at boot time.
> > Mareck,
> >
> >  I guess that  you have a piece of code that you forgot to publish? If
> >not
> >
> > how can I have your SPI drive to run?
> >
> >  Right now I guess that the next step would be to define the SPI node in
> >
> > the im28-evk.dts file.  I will open a thread to see if anybody as a
> > solution for that. What is your take on that?
> >
> > 
> >
> > Thanks guys,
> > Alain-Serge         
> 
> [...]
> 
> Fabio already answered your question. Lemme teach you a few more rules:
> 1) Do not top post in the email conversation ;-)
> 2) About DT. You're supposed to include imx28.dtsi in your
> imx28-yourboard.dts file. Then everything that's already defined in the
> imx28.dtsi will be present in your imx28-yourboard.dts . But the key thing
> is, if you define something again, it will override the stuff already
> defined in the imx28.dtsi file. But you don't have to redefine everything,
> just redefine what you need changed.
> 
> Best regards,
> Marek Vasut

Best regards,
Marek Vasut