All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gustavo Padovan <gustavo@padovan.org>
To: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 04/17] Bluetooth: Add basic packet parsing to Three-wire UART driver
Date: Mon, 9 Jul 2012 11:44:10 -0300	[thread overview]
Message-ID: <20120709144410.GD536@joana> (raw)
In-Reply-To: <1340796367-10321-5-git-send-email-johan.hedberg@gmail.com>

Hi Johan,

* Johan Hedberg <johan.hedberg@gmail.com> [2012-06-27 14:25:54 +0300]:

> From: Johan Hedberg <johan.hedberg@intel.com>
> 
> This patch adds basic packet parsing to the Three-wire UART HCI driver
> for packets received from the controller.
> 
> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
> ---
>  drivers/bluetooth/hci_h5.c |  230 ++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 222 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
> index 0f97b05..3b33f90 100644
> --- a/drivers/bluetooth/hci_h5.c
> +++ b/drivers/bluetooth/hci_h5.c
> @@ -32,20 +32,37 @@
>  
>  #define H5_TXWINSIZE 4
>  
> +/*
> + * Maximum Three-wire packet:
> + *     4 byte header + max value for 12-bit length + 2 bytes for CRC
> + */
> +#define H5_MAX_LEN (4 + 0xfff + 2)
> +
> +#define SLIP_DELIMITER	0xc0
> +#define SLIP_ESC	0xdb
> +#define SLIP_ESC_DELIM	0xdc
> +#define SLIP_ESC_ESC	0xdd
> +
>  struct h5 {
> -	struct sk_buff_head unack;	/* Unack'ed packets queue */
> -	struct sk_buff_head rel;	/* Reliable packets queue */
> -	struct sk_buff_head unrel;	/* Unreliable packets queue */
> +	struct sk_buff_head	unack;		/* Unack'ed packets queue */
> +	struct sk_buff_head	rel;		/* Reliable packets queue */
> +	struct sk_buff_head	unrel;		/* Unreliable packets queue */
>  
> -	struct sk_buff *rx_skb;
> +	struct sk_buff		*rx_skb;	/* Receive buffer */
> +	size_t			rx_pending;	/* Expecting more bytes */
> +	bool			rx_esc;		/* SLIP escape mode */
>  
> -	struct timer_list timer;	/* Retransmission timer */
> +	int			(*rx_func) (struct hci_uart *hu, u8 c);
>  
> -	bool txack_req;
> +	struct timer_list	timer;		/* Retransmission timer */
>  
> -	u8 msgq_txseq;
> +	bool			txack_req;

Can we merge those bool items in a flags field?

> +
> +	u8			msgq_txseq;
>  };
>  
> +static void h5_reset_rx(struct h5 *h5);
> +
>  static void h5_timed_event(unsigned long arg)
>  {
>  	struct hci_uart *hu = (struct hci_uart *) arg;
> @@ -83,6 +100,8 @@ static int h5_open(struct hci_uart *hu)
>  	skb_queue_head_init(&h5->rel);
>  	skb_queue_head_init(&h5->unrel);
>  
> +	h5_reset_rx(h5);
> +
>  	init_timer(&h5->timer);
>  	h5->timer.function = h5_timed_event;
>  	h5->timer.data = (unsigned long) hu;
> @@ -105,9 +124,204 @@ static int h5_close(struct hci_uart *hu)
>  	return 0;
>  }
>  
> +static void h5_handle_internal_rx(struct hci_uart *hu)
> +{
> +	BT_DBG("%s", hu->hdev->name);
> +}
> +
> +static void h5_complete_rx_pkt(struct hci_uart *hu)
> +{
> +	struct h5 *h5 = hu->priv;
> +	u8 pkt_type;
> +
> +	BT_DBG("%s", hu->hdev->name);
> +
> +	pkt_type = h5->rx_skb->data[1] & 0x0f;
> +
> +	switch (pkt_type) {
> +	case HCI_EVENT_PKT:
> +	case HCI_ACLDATA_PKT:
> +	case HCI_SCODATA_PKT:
> +		bt_cb(h5->rx_skb)->pkt_type = pkt_type;
> +
> +		/* Remove Three-wire header */
> +		skb_pull(h5->rx_skb, 4);
> +
> +		hci_recv_frame(h5->rx_skb);
> +		h5->rx_skb = NULL;
> +
> +		break;
> +
> +	default:
> +		h5_handle_internal_rx(hu);
> +		break;
> +	}
> +
> +	h5_reset_rx(h5);
> +}
> +
> +static int h5_rx_crc(struct hci_uart *hu, unsigned char c)
> +{
> +	struct h5 *h5 = hu->priv;
> +
> +	BT_DBG("%s 0x%02hhx", hu->hdev->name, c);
> +
> +	h5_complete_rx_pkt(hu);
> +	h5_reset_rx(h5);
> +
> +	return 0;

There is no point in returning int here.

> +}
> +
> +static int h5_rx_payload(struct hci_uart *hu, unsigned char c)
> +{
> +	struct h5 *h5 = hu->priv;
> +	const unsigned char *hdr = h5->rx_skb->data;
> +
> +	BT_DBG("%s 0x%02hhx", hu->hdev->name, c);
> +
> +	if ((hdr[0] >> 4) & 0x01) {
> +		h5->rx_func = h5_rx_crc;
> +		h5->rx_pending = 2;
> +	} else {
> +		h5_complete_rx_pkt(hu);
> +		h5_reset_rx(h5);
> +	}
> +
> +	return 0;
> +}
> +
> +static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c)
> +{
> +	struct h5 *h5 = hu->priv;
> +	const unsigned char *hdr = h5->rx_skb->data;
> +
> +	BT_DBG("%s 0x%02hhx", hu->hdev->name, c);
> +
> +	if (((hdr[0] + hdr[1] + hdr[2] + hdr[3]) & 0xff) != 0xff) {
> +		BT_ERR("Invalid header checksum");
> +		h5_reset_rx(h5);
> +		return 0;
> +	}
> +
> +	h5->rx_func = h5_rx_payload;
> +	h5->rx_pending = ((hdr[1] >> 4) & 0xff) + (hdr[2] << 4);
> +
> +	return 0;
> +}
> +
> +static int h5_rx_pkt_start(struct hci_uart *hu, unsigned char c)
> +{
> +	struct h5 *h5 = hu->priv;
> +
> +	BT_DBG("%s 0x%02hhx", hu->hdev->name, c);
> +
> +	if (c == SLIP_DELIMITER)
> +		return 1;
> +
> +	h5->rx_func = h5_rx_3wire_hdr;
> +	h5->rx_pending = 4;
> +
> +	h5->rx_skb = bt_skb_alloc(H5_MAX_LEN, GFP_ATOMIC);
> +	if (!h5->rx_skb) {
> +		BT_ERR("Can't allocate mem for new packet");
> +		h5_reset_rx(h5);
> +		return -ENOMEM;
> +	}
> +
> +	h5->rx_skb->dev = (void *) hu->hdev;
> +
> +	return 0;
> +}
> +
> +static int h5_rx_delimiter(struct hci_uart *hu, unsigned char c)
> +{
> +	struct h5 *h5 = hu->priv;
> +
> +	BT_DBG("%s 0x%02hhx", hu->hdev->name, c);
> +
> +	if (c == SLIP_DELIMITER)
> +		h5->rx_func = h5_rx_pkt_start;
> +
> +	return 1;

Same here.

	Gustavo

  reply	other threads:[~2012-07-09 14:44 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-27 11:25 [PATCH 00/17] Bluetooth: Implement Three-wire UART HCI driver Johan Hedberg
2012-06-27 11:25 ` [PATCH 01/17] Bluetooth: Initial skeleton for Three-wire UART (H5) support Johan Hedberg
2012-06-27 11:25 ` [PATCH 02/17] Bluetooth: Add basic state tracking to Three-wire UART driver Johan Hedberg
2012-06-27 11:25 ` [PATCH 03/17] Bluetooth: Add initial reliable packet support for Three-wire UART Johan Hedberg
2012-07-09 14:34   ` Gustavo Padovan
2012-06-27 11:25 ` [PATCH 04/17] Bluetooth: Add basic packet parsing to Three-wire UART driver Johan Hedberg
2012-07-09 14:44   ` Gustavo Padovan [this message]
2012-06-27 11:25 ` [PATCH 05/17] Bluetooth: Add initial packet sending support to Three-wire UART Johan Hedberg
2012-06-27 11:25 ` [PATCH 06/17] Bluetooth: Add Three-wire header value convenience macros Johan Hedberg
2012-06-27 11:25 ` [PATCH 07/17] Bluetooth: Fix/implement Three-wire reliable packet sending Johan Hedberg
2012-06-27 11:25 ` [PATCH 08/17] Bluetooth: Add support for Three-wire Link Control packets Johan Hedberg
2012-07-10 18:51   ` Gustavo Padovan
2012-06-27 11:25 ` [PATCH 09/17] Bluetooth: Simplify hci_uart_tty_close logic Johan Hedberg
2012-06-27 11:26 ` [PATCH 10/17] Bluetooth: Add delayed init sequence support for UART controllers Johan Hedberg
2012-07-10 18:53   ` Gustavo Padovan
2012-06-27 11:26 ` [PATCH 11/17] Bluetooth: Use delayed init for Three-wire UART Johan Hedberg
2012-06-27 11:26 ` [PATCH 12/17] Bluetooth: Improve rx debug logs " Johan Hedberg
2012-06-27 11:26 ` [PATCH 13/17] Bluetooth: Add initial sleep support to " Johan Hedberg
2012-07-10 18:57   ` Gustavo Padovan
2012-06-27 11:26 ` [PATCH 14/17] Bluetooth: Add initialization tracking to HCI Three-wire driver Johan Hedberg
2012-07-10 18:58   ` Gustavo Padovan
2012-06-27 11:26 ` [PATCH 15/17] Bluetooth: Implement proper low-power support for Three-wire UART Johan Hedberg
2012-06-27 11:26 ` [PATCH 16/17] Bluetooth: Remove unnecessary h5_build_pkt function Johan Hedberg
2012-06-27 11:26 ` [PATCH 17/17] Bluetooth: Improve Three-wire UART configuration handling Johan Hedberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120709144410.GD536@joana \
    --to=gustavo@padovan.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.