[U-Boot] [PATCH V2 4/8] ehci-hcd: fix external buffer cache handling

[Marek Vasut <marek.vasut@gmail.com>]

Dear Ilya Yanok,

> Buffer coming from upper layers should be cacheline aligned/padded
> to perform safe cache operations. For now we don't do bounce
> buffering so getting unaligned buffer is an upper layer error.
> We can't check if the buffer is properly padded with current
> interface so just assume it is (consider changing with in the
> future). The following changes are done:
> 
> 1. Remove useless length alignment check. We get actual transfer
> length not the size of the underlying buffer so it's perfectly
> valid for it to be unaligned.
> 2. Move flush_dcache_range() out of while loop or it will
> flush too much.
> 3. Don't try to fix buffer address before calling invalidate:
> if it's unaligned it's an error anyway so let cache subsystem
> cry about that.
> 4. Fix end buffer address to be cacheline aligned assuming upper
> layer reserved enough space. This is potentially dangerous
> operation so upper layers should be careful about that.
> 
> Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
> ---
>  drivers/usb/host/ehci-hcd.c |   23 ++++++++++++++---------
>  1 file changed, 14 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
> index 59039f4..a6cd5e3 100644
> --- a/drivers/usb/host/ehci-hcd.c
> +++ b/drivers/usb/host/ehci-hcd.c
> @@ -175,18 +175,15 @@ static int ehci_td_buffer(struct qTD *td, void *buf,
> size_t sz) {
>  	uint32_t delta, next;
>  	uint32_t addr = (uint32_t)buf;
> -	size_t rsz = roundup(sz, 32);
>  	int idx;
> 
> -	if (sz != rsz)
> -		debug("EHCI-HCD: Misaligned buffer size (%08x)\n", sz);

Shall we not also test if addr + sz is aligned?

> -	if (addr & 31)
> +	if (addr != ALIGN(addr, ARCH_DMA_MINALIGN))
>  		debug("EHCI-HCD: Misaligned buffer address (%p)\n", buf);
[...]

Best regards,
Marek Vasut