All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ondrej Zary <linux@rainbow-software.org>
To: alsa-devel@alsa-project.org
Cc: Kernel development list <linux-kernel@vger.kernel.org>
Subject: [PATCH] snd-opti9xx: Implement suspend/resume
Date: Tue, 17 Jul 2012 09:16:44 +0200	[thread overview]
Message-ID: <201207170916.44277.linux@rainbow-software.org> (raw)

Implement suspend/resume support for Opti 92x and 93x chips.
Tested with Opti 929A+AD1848 and Opti 931.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -136,8 +136,8 @@ struct snd_opti9xx {
 #ifdef OPTi93X
 	unsigned long mc_indir_index;
 	struct resource *res_mc_indir;
-	struct snd_wss *codec;
 #endif	/* OPTi93X */
+	struct snd_wss *codec;
 	unsigned long pwd_reg;
 
 	spinlock_t lock;
@@ -870,9 +870,7 @@ static int __devinit snd_opti9xx_probe(struct snd_card *card)
 			       &codec);
 	if (error < 0)
 		return error;
-#ifdef OPTi93X
 	chip->codec = codec;
-#endif
 	error = snd_wss_pcm(codec, 0, &pcm);
 	if (error < 0)
 		return error;
@@ -1053,11 +1051,55 @@ static int __devexit snd_opti9xx_isa_remove(struct device *devptr,
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int snd_opti9xx_suspend(struct snd_card *card)
+{
+	struct snd_opti9xx *chip = card->private_data;
+
+	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+	chip->codec->suspend(chip->codec);
+	return 0;
+}
+
+static int snd_opti9xx_resume(struct snd_card *card)
+{
+	struct snd_opti9xx *chip = card->private_data;
+	int error, xdma2;
+#if defined(CS4231) || defined(OPTi93X)
+	xdma2 = dma2;
+#else
+	xdma2 = -1;
+#endif
+
+	error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2,
+				      mpu_port, mpu_irq);
+	if (error)
+		return error;
+	chip->codec->resume(chip->codec);
+	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+	return 0;
+}
+
+static int snd_opti9xx_isa_suspend(struct device *dev, unsigned int n,
+				   pm_message_t state)
+{
+	return snd_opti9xx_suspend(dev_get_drvdata(dev));
+}
+
+static int snd_opti9xx_isa_resume(struct device *dev, unsigned int n)
+{
+	return snd_opti9xx_resume(dev_get_drvdata(dev));
+}
+#endif
+
 static struct isa_driver snd_opti9xx_driver = {
 	.match		= snd_opti9xx_isa_match,
 	.probe		= snd_opti9xx_isa_probe,
 	.remove		= __devexit_p(snd_opti9xx_isa_remove),
-	/* FIXME: suspend/resume */
+#ifdef CONFIG_PM
+	.suspend	= snd_opti9xx_isa_suspend,
+	.resume		= snd_opti9xx_isa_resume,
+#endif
 	.driver		= {
 		.name	= DEV_NAME
 	},
@@ -1123,12 +1165,29 @@ static void __devexit snd_opti9xx_pnp_remove(struct pnp_card_link * pcard)
 	snd_opti9xx_pnp_is_probed = 0;
 }
 
+#ifdef CONFIG_PM
+static int snd_opti9xx_pnp_suspend(struct pnp_card_link *pcard,
+				   pm_message_t state)
+{
+	return snd_opti9xx_suspend(pnp_get_card_drvdata(pcard));
+}
+
+static int snd_opti9xx_pnp_resume(struct pnp_card_link *pcard)
+{
+	return snd_opti9xx_resume(pnp_get_card_drvdata(pcard));
+}
+#endif
+
 static struct pnp_card_driver opti9xx_pnpc_driver = {
 	.flags		= PNP_DRIVER_RES_DISABLE,
 	.name		= "opti9xx",
 	.id_table	= snd_opti9xx_pnpids,
 	.probe		= snd_opti9xx_pnp_probe,
 	.remove		= __devexit_p(snd_opti9xx_pnp_remove),
+#ifdef CONFIG_PM
+	.suspend	= snd_opti9xx_pnp_suspend,
+	.resume		= snd_opti9xx_pnp_resume,
+#endif
 };
 #endif
 

-- 
Ondrej Zary

             reply	other threads:[~2012-07-17  7:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-17  7:16 Ondrej Zary [this message]
2012-07-17  8:38 ` [PATCH] snd-opti9xx: Implement suspend/resume Rajeev kumar
2012-07-17  8:38   ` [alsa-devel] " Rajeev kumar
2012-07-17  8:51   ` Ondrej Zary
2012-07-17  8:51     ` [alsa-devel] " Ondrej Zary
2012-07-17  9:01     ` Rajeev kumar
2012-07-17  9:01       ` [alsa-devel] " Rajeev kumar
2012-07-17  8:57 ` Takashi Iwai
2012-07-17  8:57   ` [alsa-devel] " Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201207170916.44277.linux@rainbow-software.org \
    --to=linux@rainbow-software.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.