[PATCH 3/3] pch_gbe: vlan skb len fix

[Andy Cress <andycress@gmail.com>]

pch_gbe_xmit_frame skb->len verification was incorrect in vlan case 
causing bogus transfer length errors.  One correction could be:
    offset = skb->protocol == htons(ETH_P_8021Q) ? 0 : 4;
    if (unlikely(skb->len > (adapter->hw.mac.max_frame_size - offset))) 
However, this verification is not necessary, so remove it.

Signed-off-by: Andy Cress <andy.cress@us.kontron.com>

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 000ef68..817614c 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2157,13 +2157,6 @@ static int pch_gbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
 	unsigned long flags;
 
-	if (unlikely(skb->len > (adapter->hw.mac.max_frame_size - 4))) {
-		pr_err("Transfer length Error: skb len: %d > max: %d\n",
-		       skb->len, adapter->hw.mac.max_frame_size);
-		dev_kfree_skb_any(skb);
-		adapter->stats.tx_length_errors++;
-		return NETDEV_TX_OK;
-	}
 	if (!spin_trylock_irqsave(&tx_ring->tx_lock, flags)) {
 		/* Collision - tell upper layer to requeue */
 		return NETDEV_TX_LOCKED;