From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Date: Fri, 27 Jul 2012 20:39:03 +0200 [thread overview]
Message-ID: <201207272039.03204.marex@denx.de> (raw)
In-Reply-To: <CAOMZO5C5CdtDuybG2eN4Sj4c5mPbsFeoSwjT_RrL8Lnkx7incw@mail.gmail.com>
Dear Fabio Estevam,
> Hi,
>
> I have just tried the latest U-boot and I am getting the following
> when trying to load today's linux-next:
Noooohoooooooooo! :'-C
Wakizashi, here I come ...
> U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
>
> Freescale i.MX28 family at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 10.29.244.22
> Using FEC0 device
> TFTP from server 10.29.240.146; our IP address is 10.29.244.22
> Filename 'uImage'.
> Load address: 0x42000000
> Loading: ## Warning: gatewayip needed but not set
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ####
> done
> Bytes transferred = 3343968 (330660 hex)
> ## Booting kernel from Legacy Image at 42000000 ...
> Image Name: Linux-3.5.0-next-20120727+
> Created: 2012-07-27 17:27:30 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3343904 Bytes = 3.2 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> Loading Kernel Image ... data abort
> pc : [<47fa74f0>] lr : [<47f86f44>]
> sp : 47b80ca8 ip : 80338620 fp : 00000000
> r10: 42330660 r9 : 42000040 r8 : 47b80f68
> r7 : 42000000 r6 : 00000000 r5 : 47b80d1c r4 : 00000000
> r3 : ffffffff r2 : 0033061f r1 : 42330660 r0 : 80008000
> Flags: nzCv IRQs off FIQs off Mode SVC_32
> Resetting CPU ...
>
> resetting ...
>
>
> If I use the latest stable kernel I get:
>
> U-Boot 2012.07-rc3 (Jul 27 2012 - 14:45:19)
>
> Freescale i.MX28 family at 454 MHz
> BOOT: SSP SD/MMC #0, 3V3
> I2C: ready
> DRAM: 128 MiB
> MMC: MXS MMC: 0
> In: serial
> Out: serial
> Err: serial
> Net: FEC0, FEC1
> Hit any key to stop autoboot: 0
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 10.29.244.22
> Using FEC0 device
> TFTP from server 10.29.240.146; our IP address is 10.29.244.22
> Filename 'uImage'.
> Load address: 0x42000000
> Loading: ## Warning: gatewayip needed but not set
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> #################################################################
> ###################################
> done
> Bytes transferred = 3170352 (306030 hex)
> ## Booting kernel from Legacy Image at 42000000 ...
> Image Name: Linux-3.4.6
> Created: 2012-07-26 23:30:59 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 3170288 Bytes = 3 MiB
> Load Address: 90008000
> Entry Point: 90008000
> Verifying Checksum ... OK
> Loading Kernel Image ...
>
> Is there any patch missing or any ideas?
I'm stuck at 20120723 for a bit ... I'll need to resync. Do you suspect uboot
issue or kernel bug?
> Thanks,
>
> Fabio Estevam
Best regards,
Marek Vasut
next prev parent reply other threads:[~2012-07-27 18:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-27 18:14 [U-Boot] mx28evk kernel does not boot with 2012.07-rc3 Fabio Estevam
2012-07-27 18:39 ` Marek Vasut [this message]
2012-07-27 18:44 ` Fabio Estevam
2012-07-27 19:11 ` Marek Vasut
2012-07-27 19:14 ` Fabio Estevam
2012-07-27 19:43 ` Wolfgang Denk
2012-07-28 20:21 ` Fabio Estevam
2012-07-28 20:28 ` Wolfgang Denk
2012-07-27 23:08 ` Marek Vasut
2012-07-27 23:20 ` Marek Vasut
2012-07-28 20:12 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201207272039.03204.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.