From: Martin Steigerwald <Martin@lichtvoll.de>
To: linux-btrfs@vger.kernel.org
Cc: Marc MERLIN <marc@merlins.org>, "Fajar A. Nugraha" <list@fajar.net>
Subject: Re: How can btrfs take 23sec to stat 23K files from an SSD?
Date: Thu, 2 Aug 2012 13:25:17 +0200 [thread overview]
Message-ID: <201208021325.17433.Martin@lichtvoll.de> (raw)
In-Reply-To: <20120802050741.GA22772@merlins.org>
Am Donnerstag, 2. August 2012 schrieb Marc MERLIN:
> So, doctor, is it bad? :)
>
> randomwrite: (g=0): rw=randwrite, bs=2K-16K/2K-16K, ioengine=libaio, iodepth=64
> sequentialwrite: (g=1): rw=write, bs=2K-16K/2K-16K, ioengine=libaio, iodepth=64
> randomread: (g=2): rw=randread, bs=2K-16K/2K-16K, ioengine=libaio, iodepth=64
> sequentialread: (g=3): rw=read, bs=2K-16K/2K-16K, ioengine=libaio, iodepth=64
> 2.0.8
> Starting 4 processes
> randomwrite: Laying out IO file(s) (1 file(s) / 2048MB)
> Jobs: 1 (f=1): [___R] [100.0% done] [558.8M/0K /s] [63.8K/0 iops] [eta 00m:00s]
> randomwrite: (groupid=0, jobs=1): err= 0: pid=7193
> write: io=102048KB, bw=1700.8KB/s, iops=189 , runt= 60003msec
> slat (usec): min=21 , max=219834 , avg=5250.91, stdev=5936.55
> clat (usec): min=25 , max=738932 , avg=329339.45, stdev=106004.63
> lat (msec): min=4 , max=751 , avg=334.59, stdev=107.57
> clat percentiles (msec):
Heck, I didn´t look at the IOPS figure!
189 IOPS for a SATA-600 SSD. Thats pathetic.
So again, please test this without dm_crypt. I can´t believe that this
is the maximum the hardware is able to achieve.
A really fast 15000 rpm SAS harddisk might top that.
--
Martin 'Helios' Steigerwald - http://www.Lichtvoll.de
GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7
next prev parent reply other threads:[~2012-08-02 11:25 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-30 0:37 brtfs on top of dmcrypt with SSD. No corruption iff write cache off? Marc MERLIN
2012-02-01 17:56 ` Chris Mason
2012-02-02 3:23 ` Marc MERLIN
2012-02-02 12:42 ` Chris Mason
2012-02-12 22:32 ` Marc MERLIN
2012-02-12 23:47 ` Milan Broz
2012-02-13 0:14 ` Marc MERLIN
2012-02-15 15:42 ` Calvin Walton
2012-02-15 16:55 ` Marc MERLIN
2012-02-15 16:59 ` Hugo Mills
2012-02-22 10:28 ` Justin Ossevoort
2012-02-22 11:07 ` Hugo Mills
2012-02-16 6:33 ` Chris Samuel
2012-02-18 12:33 ` Martin Steigerwald
2012-02-18 12:39 ` Martin Steigerwald
2012-02-18 12:49 ` Martin Steigerwald
2012-02-18 16:07 ` Marc MERLIN
2012-02-19 0:53 ` Clemens Eisserer
2012-07-18 18:13 ` brtfs on top of dmcrypt with SSD -> Trim or no Trim Marc MERLIN
2012-07-18 20:04 ` Fajar A. Nugraha
2012-07-18 20:37 ` Marc MERLIN
2012-07-18 21:34 ` Clemens Eisserer
2012-07-18 21:48 ` Marc MERLIN
2012-07-18 21:49 ` Martin Steigerwald
2012-07-18 22:04 ` Marc MERLIN
2012-07-19 10:40 ` Martin Steigerwald
2012-07-22 18:58 ` brtfs on top of dmcrypt with SSD -> ssd or nossd + crypt performance? Marc MERLIN
2012-07-22 19:35 ` Martin Steigerwald
2012-07-22 19:43 ` Martin Steigerwald
2012-07-22 20:44 ` Marc MERLIN
2012-07-22 22:41 ` brtfs on top of dmcrypt with SSD -> file access 5x slower than spinning disk Marc MERLIN
2012-07-23 6:42 ` How can btrfs take 23sec to stat 23K files from an SSD? Marc MERLIN
2012-07-24 7:56 ` Martin Steigerwald
2012-07-27 4:40 ` Marc MERLIN
2012-07-27 11:08 ` Chris Mason
2012-07-27 18:42 ` Marc MERLIN
2012-08-01 6:01 ` Marc MERLIN
2012-08-01 6:08 ` Fajar A. Nugraha
2012-08-01 6:21 ` Marc MERLIN
2012-08-01 21:57 ` Martin Steigerwald
2012-08-02 5:07 ` Marc MERLIN
2012-08-02 11:18 ` Martin Steigerwald
2012-08-02 17:39 ` Marc MERLIN
2012-08-02 20:20 ` Martin Steigerwald
2012-08-02 20:44 ` Marc MERLIN
2012-08-02 21:21 ` Martin Steigerwald
2012-08-02 21:49 ` Marc MERLIN
2012-08-03 18:45 ` Martin Steigerwald
2012-08-16 7:45 ` Marc MERLIN
2012-08-02 11:25 ` Martin Steigerwald [this message]
2012-08-01 6:36 ` Chris Samuel
2012-08-01 6:40 ` Marc MERLIN
-- strict thread matches above, loose matches on Subject: below --
2012-07-24 6:18 Marc MERLIN
2012-07-25 15:45 du -s src is a lot slower on SSD than spinning disk in the same laptop Marc MERLIN
[not found] ` <alpine.LFD.2.00.1207252023080.4340@(none)>
2012-07-25 23:38 ` Marc MERLIN
2012-07-26 3:32 ` Ted Ts'o
2012-07-26 3:35 ` Marc MERLIN
2012-07-26 6:54 ` Marc MERLIN
2012-08-01 5:30 ` Marc MERLIN
2012-08-01 8:18 ` Spelic
2012-08-16 7:50 ` Marc MERLIN
[not found] ` <502CC2A2.4010506@shiftmail.org>
2012-08-16 17:55 ` Marc MERLIN
2012-09-05 16:52 ` ext4 crash with 3.5.2 in ext4_ext_remove_space Marc MERLIN
2012-09-05 17:50 ` Lukáš Czerner
2012-09-05 17:53 ` Marc MERLIN
2012-09-06 4:24 ` Marc MERLIN
2012-09-07 15:19 ` Marc MERLIN
2012-09-07 15:39 ` Lukáš Czerner
2012-09-07 15:51 ` Marc MERLIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201208021325.17433.Martin@lichtvoll.de \
--to=martin@lichtvoll.de \
--cc=linux-btrfs@vger.kernel.org \
--cc=list@fajar.net \
--cc=marc@merlins.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.