pull request: wireless 2012-08-03

["John W. Linville" <linville@tuxdriver.com>]

[-- Attachment #1: Type: text/plain, Size: 22472 bytes --]

commit d4e5979c0da95791aa717c18e162540c7a596360

Dave,

This request covers a batch of fixes intended for the 3.6 stream.

Daniel Drake provides a pair of libertas fixes: one to avoid
unnecessary resets in order to keep the MMC layer happy; and another
to correct a couple of memory leaks.

Eliad Peller gives us a mac80211 fix for an issue that could fail to
notify userland of a completed scan.

Johannes Berg provides "a few fixes for various things [Johannes]
found doing code inspection for [his] multi-channel work".

Mohammed Shafi Shajakhan provides a simple hardware-enablement
(i.e. device ID) patch for ath9k.

Paul Stewart provides a cfg80211 fix to ensure that the presence of
beacons on a channel is recorded correctly.

Rafał Miłecki gives us a bcma device ID patch to support BCM43228
devices, and a b43 GPIO fix.

Seth Forshee provide a pair of patches to properly expose some
regulatory information needed by brcmsmac.  This corrects a lockdep
issue created by a patch that is already in the tree.

Stanislaw Gruszka provides a regulatory code fix to correct an earlier
regression with the rt2x00 drivers.

Woody Hung offers an rt2x00 fix to correct a regression when resuming
an rt3290 device from S3/S4.  This one seems big, but most of its
size comes from moving a function between two source files.

Please let me know if there are problems!

Thanks,

John

---

The following changes since commit e33cdac014d50dd9753e1399ae8b0b5cd98d7aa0:

  ipv4: route.c cleanup (2012-08-02 02:54:43 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git tags/master-2012-08-03

for you to fetch changes up to d4e5979c0da95791aa717c18e162540c7a596360:

  ath9k: Add PID/VID support for AR1111 (2012-08-03 10:11:14 -0400)

----------------------------------------------------------------
Daniel Drake (2):
      libertas: don't reset card on error when it is being removed
      libertas: fix two memory leaks

Eliad Peller (1):
      mac80211: don't clear sched_scan_sdata on sched scan stop request

Johannes Berg (4):
      mac80211: fix scan_sdata assignment
      Merge remote-tracking branch 'wireless/master' into mac80211
      mac80211: clear timer bits when disconnecting
      mac80211: cancel mesh path timer

John W. Linville (1):
      Merge branch 'for-john' of git://git.kernel.org/.../jberg/mac80211

Mohammed Shafi Shajakhan (1):
      ath9k: Add PID/VID support for AR1111

Paul Stewart (1):
      cfg80211: Clear "beacon_found" on regulatory restore

Rafał Miłecki (2):
      bcma: BCM43228 support
      b43: fix logic in GPIO init

Seth Forshee (2):
      cfg80211: add channel flag to prohibit OFDM operation
      brcmsmac: use channel flags to restrict OFDM

Stanislaw Gruszka (1):
      wireless: reg: restore previous behaviour of chan->max_power calculations

Woody Hung (1):
      rt2x00 : fix rt3290 resuming failed.

 drivers/bcma/host_pci.c                            |    1 +
 drivers/bcma/sprom.c                               |    4 +-
 drivers/net/wireless/ath/ath9k/hw.c                |    1 +
 drivers/net/wireless/ath/ath9k/hw.h                |    1 +
 drivers/net/wireless/ath/ath9k/pci.c               |    1 +
 drivers/net/wireless/b43/main.c                    |   21 +++---
 drivers/net/wireless/brcm80211/brcmsmac/channel.c  |    5 +-
 .../net/wireless/brcm80211/brcmsmac/mac80211_if.c  |    3 +-
 drivers/net/wireless/libertas/cfg.c                |    1 +
 drivers/net/wireless/libertas/if_sdio.c            |    1 +
 drivers/net/wireless/libertas/main.c               |    5 +-
 drivers/net/wireless/rt2x00/rt2800lib.c            |   68 +++++++++++++++++++
 drivers/net/wireless/rt2x00/rt2800pci.c            |   71 --------------------
 include/linux/bcma/bcma_driver_chipcommon.h        |    6 ++
 include/net/cfg80211.h                             |    2 +
 net/mac80211/mesh.c                                |    3 +
 net/mac80211/mlme.c                                |    2 +
 net/mac80211/scan.c                                |    3 +-
 net/wireless/reg.c                                 |   19 +++++-
 19 files changed, 129 insertions(+), 89 deletions(-)

diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 11b32d2..a6e5672 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -272,6 +272,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
 	{ 0, },
 };
diff --git a/drivers/bcma/sprom.c b/drivers/bcma/sprom.c
index 26823d9..9ea4627 100644
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(struct bcma_bus *bus)
 		/* for these chips OTP is always available */
 		present = true;
 		break;
-
+	case BCMA_CHIP_ID_BCM43228:
+		present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
+		break;
 	default:
 		present = false;
 		break;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index cfa91ab..60b6a9d 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -730,6 +730,7 @@ int ath9k_hw_init(struct ath_hw *ah)
 	case AR9300_DEVID_QCA955X:
 	case AR9300_DEVID_AR9580:
 	case AR9300_DEVID_AR9462:
+	case AR9485_DEVID_AR1111:
 		break;
 	default:
 		if (common->bus_ops->ath_bus_type == ATH_USB)
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index dd0c146..ce7332c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -49,6 +49,7 @@
 #define AR9300_DEVID_AR9462	0x0034
 #define AR9300_DEVID_AR9330	0x0035
 #define AR9300_DEVID_QCA955X	0x0038
+#define AR9485_DEVID_AR1111	0x0037
 
 #define AR5416_AR9100_DEVID	0x000b
 
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 87b89d5..d455de9 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -37,6 +37,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
 	{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
 	{ PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E  AR9580 */
 	{ PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E  AR9462 */
+	{ PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E  AR1111/AR9485 */
 	{ 0 }
 };
 
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index b80352b..a140165 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2719,32 +2719,37 @@ static int b43_gpio_init(struct b43_wldev *dev)
 	if (dev->dev->chip_id == 0x4301) {
 		mask |= 0x0060;
 		set |= 0x0060;
+	} else if (dev->dev->chip_id == 0x5354) {
+		/* Don't allow overtaking buttons GPIOs */
+		set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */
 	}
-	if (dev->dev->chip_id == 0x5354)
-		set &= 0xff02;
+
 	if (0 /* FIXME: conditional unknown */ ) {
 		b43_write16(dev, B43_MMIO_GPIO_MASK,
 			    b43_read16(dev, B43_MMIO_GPIO_MASK)
 			    | 0x0100);
-		mask |= 0x0180;
-		set |= 0x0180;
+		/* BT Coexistance Input */
+		mask |= 0x0080;
+		set |= 0x0080;
+		/* BT Coexistance Out */
+		mask |= 0x0100;
+		set |= 0x0100;
 	}
 	if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_PACTRL) {
+		/* PA is controlled by gpio 9, let ucode handle it */
 		b43_write16(dev, B43_MMIO_GPIO_MASK,
 			    b43_read16(dev, B43_MMIO_GPIO_MASK)
 			    | 0x0200);
 		mask |= 0x0200;
 		set |= 0x0200;
 	}
-	if (dev->dev->core_rev >= 2)
-		mask |= 0x0010;	/* FIXME: This is redundant. */
 
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
 	case B43_BUS_BCMA:
 		bcma_cc_write32(&dev->dev->bdev->bus->drv_cc, BCMA_CC_GPIOCTL,
 				(bcma_cc_read32(&dev->dev->bdev->bus->drv_cc,
-					BCMA_CC_GPIOCTL) & mask) | set);
+					BCMA_CC_GPIOCTL) & ~mask) | set);
 		break;
 #endif
 #ifdef CONFIG_B43_SSB
@@ -2753,7 +2758,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
 		if (gpiodev)
 			ssb_write32(gpiodev, B43_GPIO_CONTROL,
 				    (ssb_read32(gpiodev, B43_GPIO_CONTROL)
-				    & mask) | set);
+				    & ~mask) | set);
 		break;
 #endif
 	}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 9a4c63f..7ed7d75 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -382,9 +382,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 {
 	struct brcms_c_info *wlc = wlc_cm->wlc;
 	struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
-	const struct ieee80211_reg_rule *reg_rule;
 	struct txpwr_limits txpwr;
-	int ret;
 
 	brcms_c_channel_reg_limits(wlc_cm, chanspec, &txpwr);
 
@@ -393,8 +391,7 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
 	);
 
 	/* set or restore gmode as required by regulatory */
-	ret = freq_reg_info(wlc->wiphy, ch->center_freq, 0, &reg_rule);
-	if (!ret && (reg_rule->flags & NL80211_RRF_NO_OFDM))
+	if (ch->flags & IEEE80211_CHAN_NO_OFDM)
 		brcms_c_set_gmode(wlc, GMODE_LEGACY_B, false);
 	else
 		brcms_c_set_gmode(wlc, wlc->protection->gmode_user, false);
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 9e79d47..192ad5c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -121,7 +121,8 @@ static struct ieee80211_channel brcms_2ghz_chantable[] = {
 		 IEEE80211_CHAN_NO_HT40PLUS),
 	CHAN2GHZ(14, 2484,
 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
-		 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
+		 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
+		 IEEE80211_CHAN_NO_OFDM)
 };
 
 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index eb5de80..1c10b54 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1254,6 +1254,7 @@ static int lbs_associate(struct lbs_private *priv,
 			netif_tx_wake_all_queues(priv->dev);
 	}
 
+	kfree(cmd);
 done:
 	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
 	return ret;
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 76caeba..e970897 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1314,6 +1314,7 @@ static void if_sdio_remove(struct sdio_func *func)
 		kfree(packet);
 	}
 
+	kfree(card);
 	lbs_deb_leave(LBS_DEB_SDIO);
 }
 
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 5804818..fe1ea43 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -571,7 +571,10 @@ static int lbs_thread(void *data)
 			netdev_info(dev, "Timeout submitting command 0x%04x\n",
 				    le16_to_cpu(cmdnode->cmdbuf->command));
 			lbs_complete_command(priv, cmdnode, -ETIMEDOUT);
-			if (priv->reset_card)
+
+			/* Reset card, but only when it isn't in the process
+			 * of being shutdown anyway. */
+			if (!dev->dismantle && priv->reset_card)
 				priv->reset_card(priv);
 		}
 		priv->cmd_timed_out = 0;
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 88455b1..cb8c2ac 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -221,6 +221,67 @@ static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }
 
+static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	int i, count;
+
+	rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+	if (rt2x00_get_field32(reg, WLAN_EN))
+		return 0;
+
+	rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
+	rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
+	rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
+	rt2x00_set_field32(&reg, WLAN_EN, 1);
+	rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+
+	udelay(REGISTER_BUSY_DELAY);
+
+	count = 0;
+	do {
+		/*
+		 * Check PLL_LD & XTAL_RDY.
+		 */
+		for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+			rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
+			if (rt2x00_get_field32(reg, PLL_LD) &&
+			    rt2x00_get_field32(reg, XTAL_RDY))
+				break;
+			udelay(REGISTER_BUSY_DELAY);
+		}
+
+		if (i >= REGISTER_BUSY_COUNT) {
+
+			if (count >= 10)
+				return -EIO;
+
+			rt2800_register_write(rt2x00dev, 0x58, 0x018);
+			udelay(REGISTER_BUSY_DELAY);
+			rt2800_register_write(rt2x00dev, 0x58, 0x418);
+			udelay(REGISTER_BUSY_DELAY);
+			rt2800_register_write(rt2x00dev, 0x58, 0x618);
+			udelay(REGISTER_BUSY_DELAY);
+			count++;
+		} else {
+			count = 0;
+		}
+
+		rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
+		rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
+		rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
+		rt2x00_set_field32(&reg, WLAN_RESET, 1);
+		rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+		udelay(10);
+		rt2x00_set_field32(&reg, WLAN_RESET, 0);
+		rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
+		udelay(10);
+		rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
+	} while (count != 0);
+
+	return 0;
+}
+
 void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
 			const u8 command, const u8 token,
 			const u8 arg0, const u8 arg1)
@@ -400,6 +461,13 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
 {
 	unsigned int i;
 	u32 reg;
+	int retval;
+
+	if (rt2x00_rt(rt2x00dev, RT3290)) {
+		retval = rt2800_enable_wlan_rt3290(rt2x00dev);
+		if (retval)
+			return -EBUSY;
+	}
 
 	/*
 	 * If driver doesn't wake up firmware here,
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 235376e..98aa426 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -980,66 +980,6 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 	return rt2800_validate_eeprom(rt2x00dev);
 }
 
-static int rt2800_enable_wlan_rt3290(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	int i, count;
-
-	rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
-	if (rt2x00_get_field32(reg, WLAN_EN))
-		return 0;
-
-	rt2x00_set_field32(&reg, WLAN_GPIO_OUT_OE_BIT_ALL, 0xff);
-	rt2x00_set_field32(&reg, FRC_WL_ANT_SET, 1);
-	rt2x00_set_field32(&reg, WLAN_CLK_EN, 0);
-	rt2x00_set_field32(&reg, WLAN_EN, 1);
-	rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-
-	udelay(REGISTER_BUSY_DELAY);
-
-	count = 0;
-	do {
-		/*
-		 * Check PLL_LD & XTAL_RDY.
-		 */
-		for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-			rt2800_register_read(rt2x00dev, CMB_CTRL, &reg);
-			if (rt2x00_get_field32(reg, PLL_LD) &&
-			    rt2x00_get_field32(reg, XTAL_RDY))
-				break;
-			udelay(REGISTER_BUSY_DELAY);
-		}
-
-		if (i >= REGISTER_BUSY_COUNT) {
-
-			if (count >= 10)
-				return -EIO;
-
-			rt2800_register_write(rt2x00dev, 0x58, 0x018);
-			udelay(REGISTER_BUSY_DELAY);
-			rt2800_register_write(rt2x00dev, 0x58, 0x418);
-			udelay(REGISTER_BUSY_DELAY);
-			rt2800_register_write(rt2x00dev, 0x58, 0x618);
-			udelay(REGISTER_BUSY_DELAY);
-			count++;
-		} else {
-			count = 0;
-		}
-
-		rt2800_register_read(rt2x00dev, WLAN_FUN_CTRL, &reg);
-		rt2x00_set_field32(&reg, PCIE_APP0_CLK_REQ, 0);
-		rt2x00_set_field32(&reg, WLAN_CLK_EN, 1);
-		rt2x00_set_field32(&reg, WLAN_RESET, 1);
-		rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-		udelay(10);
-		rt2x00_set_field32(&reg, WLAN_RESET, 0);
-		rt2800_register_write(rt2x00dev, WLAN_FUN_CTRL, reg);
-		udelay(10);
-		rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, 0x7fffffff);
-	} while (count != 0);
-
-	return 0;
-}
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
@@ -1063,17 +1003,6 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 		return retval;
 
 	/*
-	 * In probe phase call rt2800_enable_wlan_rt3290 to enable wlan
-	 * clk for rt3290. That avoid the MCU fail in start phase.
-	 */
-	if (rt2x00_rt(rt2x00dev, RT3290)) {
-		retval = rt2800_enable_wlan_rt3290(rt2x00dev);
-
-		if (retval)
-			return retval;
-	}
-
-	/*
 	 * This device has multiple filters for control frames
 	 * and has a separate filter for PS Poll frames.
 	 */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 3c80885..d323a4b 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -89,6 +89,12 @@
 #define  BCMA_CC_CHIPST_4313_OTP_PRESENT	2
 #define  BCMA_CC_CHIPST_4331_SPROM_PRESENT	2
 #define  BCMA_CC_CHIPST_4331_OTP_PRESENT	4
+#define  BCMA_CC_CHIPST_43228_ILP_DIV_EN	0x00000001
+#define  BCMA_CC_CHIPST_43228_OTP_PRESENT	0x00000002
+#define  BCMA_CC_CHIPST_43228_SERDES_REFCLK_PADSEL	0x00000004
+#define  BCMA_CC_CHIPST_43228_SDIO_MODE		0x00000008
+#define  BCMA_CC_CHIPST_43228_SDIO_OTP_PRESENT	0x00000010
+#define  BCMA_CC_CHIPST_43228_SDIO_RESET	0x00000020
 #define  BCMA_CC_CHIPST_4706_PKG_OPTION		BIT(0) /* 0: full-featured package 1: low-cost package */
 #define  BCMA_CC_CHIPST_4706_SFLASH_PRESENT	BIT(1) /* 0: parallel, 1: serial flash is present */
 #define  BCMA_CC_CHIPST_4706_SFLASH_TYPE	BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 493fa0c..3d254e1 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -96,6 +96,7 @@ enum ieee80211_band {
  * 	is not permitted.
  * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
  * 	is not permitted.
+ * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel.
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED		= 1<<0,
@@ -104,6 +105,7 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_RADAR		= 1<<3,
 	IEEE80211_CHAN_NO_HT40PLUS	= 1<<4,
 	IEEE80211_CHAN_NO_HT40MINUS	= 1<<5,
+	IEEE80211_CHAN_NO_OFDM		= 1<<6,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 6fac18c..8557235 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -622,6 +622,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 
 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
+	del_timer_sync(&sdata->u.mesh.mesh_path_timer);
 	/*
 	 * If the timer fired while we waited for it, it will have
 	 * requeued the work. Now the work will be running again
@@ -634,6 +635,8 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 	local->fif_other_bss--;
 	atomic_dec(&local->iff_allmultis);
 	ieee80211_configure_filter(local);
+
+	sdata->u.mesh.timers_running = 0;
 }
 
 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index cef0c9e..a4a5acd 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1430,6 +1430,8 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
 	del_timer_sync(&sdata->u.mgd.timer);
 	del_timer_sync(&sdata->u.mgd.chswitch_timer);
+
+	sdata->u.mgd.timers_running = 0;
 }
 
 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index bcaee5d..839dd97 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -299,7 +299,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted,
 	if (local->scan_req != local->int_scan_req)
 		cfg80211_scan_done(local->scan_req, aborted);
 	local->scan_req = NULL;
-	local->scan_sdata = NULL;
+	rcu_assign_pointer(local->scan_sdata, NULL);
 
 	local->scanning = 0;
 	local->scan_channel = NULL;
@@ -984,7 +984,6 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata)
 			kfree(local->sched_scan_ies.ie[i]);
 
 		drv_sched_scan_stop(local, sdata);
-		rcu_assign_pointer(local->sched_scan_sdata, NULL);
 	}
 out:
 	mutex_unlock(&local->mtx);
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 2303ee7..2ded3c7 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -680,6 +680,8 @@ static u32 map_regdom_flags(u32 rd_flags)
 		channel_flags |= IEEE80211_CHAN_NO_IBSS;
 	if (rd_flags & NL80211_RRF_DFS)
 		channel_flags |= IEEE80211_CHAN_RADAR;
+	if (rd_flags & NL80211_RRF_NO_OFDM)
+		channel_flags |= IEEE80211_CHAN_NO_OFDM;
 	return channel_flags;
 }
 
@@ -901,7 +903,21 @@ static void handle_channel(struct wiphy *wiphy,
 	chan->max_antenna_gain = min(chan->orig_mag,
 		(int) MBI_TO_DBI(power_rule->max_antenna_gain));
 	chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp);
-	chan->max_power = min(chan->max_power, chan->max_reg_power);
+	if (chan->orig_mpwr) {
+		/*
+		 * Devices that have their own custom regulatory domain
+		 * but also use WIPHY_FLAG_STRICT_REGULATORY will follow the
+		 * passed country IE power settings.
+		 */
+		if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+		    wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY &&
+		    wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
+			chan->max_power = chan->max_reg_power;
+		else
+			chan->max_power = min(chan->orig_mpwr,
+					      chan->max_reg_power);
+	} else
+		chan->max_power = chan->max_reg_power;
 }
 
 static void handle_band(struct wiphy *wiphy,
@@ -1885,6 +1901,7 @@ static void restore_custom_reg_settings(struct wiphy *wiphy)
 			chan->flags = chan->orig_flags;
 			chan->max_antenna_gain = chan->orig_mag;
 			chan->max_power = chan->orig_mpwr;
+			chan->beacon_found = false;
 		}
 	}
 }
-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]