Re: development board?

["Oliver Kowalke" <oliver.kowalke@gmx.de>]

Atheros AR7161 == 32-bit MIPS 24K processor core

price ca 85,- euros

> I'll try MikroTik RouterBOARD 450G:
> 
>     CPU: AR7161 680MHz
>     Memory 256MB DDR SDRAM onboard memory
>     Boot loader RouterBOOT
>     Data storage 512MB onboard NAND memory chip, microSD slot on back side
>     Ethernet Five 10/100/1000 Mbit/s Ethernet ports with Auto-MDI/X
>     miniPCI none
>     Extras Reset switch, Beeper
>     Serial port One DB9 RS232C asynchronous serial port
>     Power, NAND activity, 5 user LEDs
>     Power options Power over Ethernet: 18-28V DC (except power over
> datalines). Power jack: 8-28V DC
>     Dimensions 9 cm x 11.5 cm, 105 grams
>     Operating System MikroTik RouterOS v3, Level5 license
>     Actual tested throughput
>         Ether1 <-> Ether2 = 1Gbps
>         Ether2 <-> Ether3 = 650Mbps
> 
> openvrt/debvrt support this board
> 
> (no FPU)
> 
> Oliver 
> 
> > On Thu, Aug 02, 2012 at 05:25:13PM +0300, Kaj-Michael Lang wrote:
> > 
> > > On Thu, 2012-07-19 at 21:15 +0200, Oliver Kowalke wrote:
> > > > I'm searching for an development board with a MIPS processor - 1GB
> > > > RAM 
> > > > would be nice but 10/100MBit ethernet is required. 
> > > 
> > > Don't know about the ethernet part, but you could check out the very
> > > cheap mips based android tablets. Search for Ainol Novo 7 Paladin for
> > > example, under 100€.
> > > 
> > > Anyone tried getting plain-old-linux running on one?
> > 
> > I suggest that whoever has suggestions for suitable boards should list
> > them including key technical data such as kernel / distribution support,
> > CPU type, 32/64 bit, endianess, price, peripherals, manufacturing status
> > and availability.
> > 
> >   Ralf
> > 
>