From: Shaun Ruffell <sruffell@digium.com>
To: Dave Haywood <tla@oak.selfip.net>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>, linux-net@vger.kernel.org
Subject: Re: BUG: unable to handle kernel paging request at 00010016
Date: Sat, 18 Aug 2012 23:25:43 -0500 [thread overview]
Message-ID: <20120819042543.GA14461@digium.com> (raw)
In-Reply-To: <502ECC74.9030605@oak.selfip.net>
Adding linux-net to the CC list.
On Fri, Aug 17, 2012 at 11:57:56PM +0100, Dave Haywood wrote:
> [1.] One line summary of the problem:
> BUG: unable to handle kernel paging request at 00010016
>
> System boots then crashes a 5-10 or so seconds after getting to the login prompt
> Booting without the network cable attached prevents the crash (no evidence beyond 10 minutes after boot)
>
> Diagnostics:
> Captured the boot and managed a login + dmesg before the crash
> Some of the log looks corrupted. Probably my crappy usb dongle serial flow control but left it in anyway
[snip]
> [6.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt)
> [ 62.907899] BUG: unable to handle kernel paging request at 00010016
> [ 62.908002] IP: [<c15acfc9>] inet6_sk_rx_dst_set+0x29/0x40
> [ 62.908002] *pde = 00000000
> [ 62.908002] Oops: 0000 [#1] SMP
> [ 62.908002] Pid: 2168, comm: mprime Not tainted 3.6.0-rc2 #297 Compaq Deskpro/06C4h
> [ 62.908002] EIP: 0060:[<c15acfc9>] EFLAGS: 00010202 CPU: 0
> [ 62.908002] EIP is at inet6_sk_rx_dst_set+0x29/0x40
> [ 62.908002] EAX: ce738508 EBX: ce73a760 ECX: cf377000 EDX: 00010002
> [ 62.908002] ESI: ca06c900 EDI: ce738000 EBP: cf80bc7c ESP: cf80bc7c
> [ 62.908002] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> [ 62.908002] CR0: 80050033 CR2: 00010016 CR3: 0a036000 CR4: 000007d0
> [ 62.908002] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> [ 62.908002] DR6: ffff0ff0 DR7: 00000400
> [ 62.908002] Process mprime (pid: 2168, ti=cf80a000 task=ce4f7390 task.ti=ca052000)
> [ 62.908002] Stack:
> [ 62.908002] cf80bc9c c15449cb ffffffff ce436780 00000000 ce738508 ca06c900 ce738000
> [ 62.908002] cf80bcc0 c154337e c167545e cf80bcec c124b318 ce436780 ce738508 ce738000
> [ 62.908002] ce436780 cf80bd48 c15aff9d 00000000 00000001 cf80bcec c1236880 ce691ec0
> [ 62.908002] Call Trace:
> [ 62.908002] [<c15449cb>] tcp_create_openreq_child+0x3b/0x4a0
> [ 62.908002] [<c154337e>] tcp_v4_syn_recv_sock+0x2e/0x2a0
> [ 62.908002] [<c167545e>] ? _raw_spin_unlock_bh+0xe/0x10
> [ 62.908002] [<c124b318>] ? selinux_netlbl_sock_rcv_skb+0x18/0x190
> [ 62.908002] [<c15aff9d>] tcp_v6_syn_recv_sock+0x3ed/0x6d0
> [ 62.908002] [<c1236880>] ? selinux_parse_skb+0x50/0xb0
> [ 62.908002] [<c15450b3>] tcp_check_req+0x283/0x450
> [ 62.908002] [<c1541191>] tcp_v4_hnd_req+0x51/0x140
> [ 62.908002] [<c1542e69>] tcp_v4_do_rcv+0x129/0x1b0
> [ 62.908002] [<c14f5b45>] ? sk_filter+0x25/0xb0
> [ 62.908002] [<c154407e>] tcp_v4_rcv+0x5fe/0x730
> [ 62.908002] [<c15209b0>] ? ip_rcv_finish+0x2f0/0x2f0
> [ 62.908002] [<c1520a3c>] ip_local_deliver_finish+0x8c/0x260
> [ 62.908002] [<c15206c0>] ? inet_del_protocol+0x30/0x30
> [ 62.908002] [<c1520d9f>] ip_local_deliver+0x7f/0x90
> [ 62.908002] [<c15209b0>] ? ip_rcv_finish+0x2f0/0x2f0
> [ 62.908002] [<c15207b1>] ip_rcv_finish+0xf1/0x2f0
> [ 62.908002] [<c15206c0>] ? inet_del_protocol+0x30/0x30
> [ 62.908002] [<c1521002>] ip_rcv+0x252/0x320
> [ 62.908002] [<c15206c0>] ? inet_del_protocol+0x30/0x30
> [ 62.908002] [<c14e19bb>] __netif_receive_skb+0x46b/0x670
> [ 62.908002] [<c14e4b72>] netif_receive_skb+0x22/0x80
> [ 62.908002] [<c13eb6e2>] rtl8139_rx+0xd2/0x370
> [ 62.908002] [<c13eb9c2>] rtl8139_poll+0x42/0xb0
> [ 62.908002] [<c14e56dd>] net_rx_action+0xed/0x1c0
> [ 62.908002] [<c12c6110>] ? fbcon_add_cursor_timer+0xd0/0xd0
> [ 62.908002] [<c10427a7>] __do_softirq+0xa7/0x200
> [ 62.908002] [<c1042700>] ? local_bh_enable_ip+0x80/0x80
> [ 62.908002] <IRQ>
> [ 62.908002] [<c1042b0e>] ? irq_exit+0x6e/0x90
> [ 62.908002] [<c1004176>] ? do_IRQ+0x46/0xb0
> [ 62.908002] [<c1042af7>] ? irq_exit+0x57/0x90
> [ 62.908002] [<c10224a6>] ? smp_apic_timer_interrupt+0x56/0x90
> [ 62.908002] [<c1676289>] ? common_interrupt+0x29/0x30
> [ 62.908002] Code: 90 90 55 8b 4a 48 89 e5 83 e1 fe 3e ff 41 40 89 88 8c 00 00 00 8b 52 74 89 90 cc 01 00 00 8b 51 58 85 d2 74 0c 8b 80 a0 01 00 00 <8b> 52 14 89 50 68 5d c3 eb 0d 90 90 90 90 90 90 90 90 90 90 90
> [ 62.908002] EIP: [<c15acfc9>] inet6_sk_rx_dst_set+0x29/0x40 SS:ESP 0068:cf80bc7c
> [ 62.908002] CR2: 0000000000010016
> [ 63.212118] ---[ end trace 1fcc7fe92846c9d3 ]---
> [ 63.216734] Kernel panic - not syncing: Fatal exception in interrupt
Just a note that I see this as well. It happens reliably for me after trying to
login to the machine via ssh.
Here is the back trace I collected on the serial port.
[ 67.258206] BUG: unable to handle kernel paging request at 00010016
[ 67.260010] IP: [<f93a4ae6>] inet6_sk_rx_dst_set+0x3a/0x89 [ipv6]
[ 67.260010] *pde = 00000000
[ 67.260010] Oops: 0000 [#1] SMP
[ 67.260010] Modules linked in: bluetooth rfkill crc16 lockd sunrpc ipv6 dm_multipath lp sg pcspkr serio_raw e1000 ata_piix libata floppy parport_pc pa rport e7xxx_edac edac_core ide_cd_mod cdrom intel_rng dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_mod megaraid_mbox megaraid_mm sd_mod scsi_mo
d ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
[ 67.260010] Pid: 0, comm: swapper/0 Not tainted 3.6.0-rc2-00117-g741badf #14 Dell Computer Corporation PowerEdge 2600 /0F0364
[ 67.260010] EIP: 0060:[<f93a4ae6>] EFLAGS: 00010202 CPU: 0
[ 67.260010] EIP is at inet6_sk_rx_dst_set+0x3a/0x89 [ipv6]
[ 67.260010] EAX: 00010002 EBX: f34c9680 ECX: 00000000 EDX: f35806c8
[ 67.260010] ESI: f3580800 EDI: f21fc000 EBP: f5817c14 ESP: f5817c0c
[ 67.260010] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 67.260010] CR0: 8005003b CR2: 00010016 CR3: 33ec6000 CR4: 000007d0
[ 67.260010] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 67.260010] DR6: ffff0ff0 DR7: 00000400
[ 67.260010] Process swapper/0 (pid: 0, ti=f5816000 task=c09bf780 task.ti=c09b4000)
[ 67.260010] Stack:
[ 67.260010] 00000000 f3580800 f5817c30 c0788ec3 f34c9680 f3580000 f93b0f00 f21fc000
[ 67.260010] 00000000 f5817c50 c07874c1 f34c9680 f3580000 0172fcbc f93b0f00 f21fc000
[ 67.260010] f34c9698 f5817cb4 f93a6eb8 00000000 f21fc000 f34c9680 f3580000 f35806c8
[ 67.260010] Call Trace:
[ 67.260010] [<c0788ec3>] tcp_create_openreq_child+0x41/0x4a7
[ 67.260010] [<c07874c1>] tcp_v4_syn_recv_sock+0x3c/0x2a1
[ 67.260010] [<f93a6eb8>] tcp_v6_syn_recv_sock+0x367/0x460 [ipv6]
[ 67.260010] [<c04848e1>] ? validate_chain+0xe2/0x4cd
[ 67.260010] [<c046859c>] ? local_clock+0x29/0x42
[ 67.260010] [<c0788ae2>] tcp_check_req+0x21e/0x401
[ 67.260010] [<c04859ed>] ? lock_release_nested+0x82/0xb8
[ 67.260010] [<c0785aeb>] tcp_v4_hnd_req+0x52/0x153
[ 67.260010] [<c0785cec>] tcp_v4_do_rcv+0x100/0x5e4
[ 67.260010] [<c07ef661>] ? _raw_spin_lock_nested+0x6a/0x71
[ 67.260010] [<c0787ed3>] tcp_v4_rcv+0x7ad/0xaf6
[ 67.260010] [<c0765aed>] ip_local_deliver_finish+0xb7/0x3ea
[ 67.260010] [<c0765a89>] ? ip_local_deliver_finish+0x53/0x3ea
[ 67.260010] [<c0765270>] ip_local_deliver+0x32/0x95
[ 67.260010] [<c07655ea>] ip_rcv_finish+0x154/0x5a0
[ 67.260010] [<c07cc572>] ? prb_retire_rx_blk_timer_expired+0xcc/0xcc
[ 67.260010] [<c0765157>] ip_rcv+0x217/0x2fe
[ 67.260010] [<c0764f40>] ? inet_del_protocol+0x35/0x35
[ 67.260010] [<c07335cf>] __netif_receive_skb+0x25f/0xa14
[ 67.260010] [<c0733406>] ? __netif_receive_skb+0x96/0xa14
[ 67.260010] [<c073567b>] netif_receive_skb+0x27/0x1c4
[ 67.260010] [<c07358a2>] napi_skb_finish+0x26/0x5e
[ 67.260010] [<c073b247>] napi_gro_receive+0xfb/0x116
[ 67.260010] [<c072d1fd>] ? __netdev_alloc_skb+0x95/0xca
[ 67.260010] [<f8a7f873>] e1000_receive_skb+0x4b/0x53 [e1000]
[ 67.260010] [<f8a84da7>] e1000_clean_rx_irq+0x262/0x3ef [e1000]
[ 67.260010] [<f8a83708>] e1000_clean+0x45/0x95 [e1000]
[ 67.260010] [<c0739a03>] net_rx_action+0x104/0x26f
[ 67.260010] [<c043b402>] __do_softirq+0xb3/0x33d
[ 67.260010] [<c043b34f>] ? _local_bh_enable+0x14/0x14
[ 67.260010] <IRQ>
[ 67.260010] [<c043b87f>] ? irq_exit+0x4d/0x80
[ 67.260010] [<c07f6df4>] ? do_IRQ+0x44/0xb0
[ 67.260010] [<c07f6d2e>] ? common_interrupt+0x2e/0x34
[ 67.260010] [<c048007b>] ? lockdep_init_map+0x421/0x4dd
[ 67.260010] [<c04089ff>] ? default_idle+0x54/0x416
[ 67.260010] [<c04094bf>] ? cpu_idle+0x6d/0x95
[ 67.260010] [<c07d7224>] ? rest_init+0xe4/0x13d
[ 67.260010] [<c07d7180>] ? rest_init+0x40/0x13d
[ 67.260010] [<c0a21ba5>] ? start_kernel+0x23b/0x2d6
[ 67.260010] [<c0a216c8>] ? obsolete_checksetup+0x97/0x97
[ 67.260010] [<c0a212a7>] ? i386_start_kernel+0x59/0x7e
[ 67.260010] Code: 42 48 01 75 30 8b 43 48 83 e0 fe f0 ff 40 40 89 86 0c 01 00 00 8b 53 6c 89 96 f8 02 00 00 8b 40 58 85 c0 74 0c 8b 96 cc 02 00 00 <8b> 40 14 89 42 68 5b 5e 5d c3 e8 c5 db 0a c7 85 c0 74 c7 e8 c1
[ 67.260010] EIP: [<f93a4ae6>] inet6_sk_rx_dst_set+0x3a/0x89 [ipv6] SS:ESP 0068:f5817c0c
[ 67.260010] CR2: 0000000000010016
[ 67.647660] ---[ end trace 292da9a1ec859dd5 ]---
Cheers,
Shaun
next prev parent reply other threads:[~2012-08-19 4:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-17 22:57 BUG: unable to handle kernel paging request at 00010016 Dave Haywood
2012-08-18 15:00 ` Dave Jones
2012-08-19 4:25 ` Shaun Ruffell [this message]
2012-08-19 8:21 ` Artem Savkov
2012-08-19 17:19 ` Shaun Ruffell
2012-08-21 0:05 ` Dave Haywood
2012-08-21 13:46 ` Neal Cardwell
2012-08-22 12:53 ` Dave Haywood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120819042543.GA14461@digium.com \
--to=sruffell@digium.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-net@vger.kernel.org \
--cc=tla@oak.selfip.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.